Difference between revisions of "Pioneer CT-S 810 S"
(→Daten) |
|||
(31 intermediate revisions by 12 users not shown) | |||
Line 1: | Line 1: | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Pioneer]] |
− | * | + | * Model: CT-S810S |
− | * | + | * Type: Single |
− | * | + | * Year built: 1992 |
− | * | + | * Made in: Japan |
− | * | + | * Color: black |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 23 watts |
− | * | + | * Dimensions: 420 x 134 x 323 mm (W x H x D) |
− | * | + | * Weight: 7,0 kg |
− | * | + | * Original price approx.: 1.000,- DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
** Line (Input) = 100 mV/54 kOhm | ** Line (Input) = 100 mV/54 kOhm | ||
− | * | + | * Number of outputs: |
− | ** | + | ** line (output) = 500 mV/3.2 kOhm |
− | ** | + | ** Headphones = 3.4 mW (load impedance 8 Ohm, Phones Level control max.) |
+ | ** CD Synchro, jack socket 2.5 mm | ||
+ | |||
+ | '''Technical Data''' | ||
+ | * Audio heads: 1 x record and playback combo head (hard permalloy), 1 x erase head (ferrite sendust). | ||
+ | * Motors: 1 x DC servo tone motor, 1 x DC coil motor, 1 x DC auxiliary motor | ||
+ | * Synchronous fluctuation: not more than 0.023% (RMS), not more than 0.056% (DIN). | ||
+ | * Belt types: Normal (Fe), Chrome, Metal | ||
+ | * Frequency response: | ||
+ | ** Normal band 15 to 20000 Hz (at recording level -20dB). | ||
+ | ** Chrome band 15 to 20000 Hz (at recording level -20dB) | ||
+ | Metal band 15 to 21000 Hz (at recording level -20dB) | ||
+ | Distortion factor: < 0.6% (at -4 dB: 160 nWb/m) | ||
+ | * Signal-to-noise ratio: >60 dB, | ||
+ | ** with Dolby B: >70 dB (at 5 KHz) | ||
+ | ** with Dolby C: >79 dB (at 5 KHz) | ||
+ | ** with Dolby S: >82 dB (at 5 KHz) | ||
+ | * Rewind time (C-60 band): 90 seconds | ||
+ | * Auto Reverse: no | ||
+ | * Title search: ± 15 titles | ||
+ | * Dolby: yes, B + C + S + HX-Pro | ||
+ | * MPX filter: yes | ||
+ | * Fader: no | ||
+ | * Pitch control: no | ||
+ | * CD synchro recording: yes | ||
+ | |||
+ | |||
+ | '''Special Features''' | ||
+ | * Super Auto BLE system (automatic tape measurement) | ||
+ | * Refrence Master Drive Dual Capstan Drive with Closed Loop Tape Guide | ||
+ | * Level meter with 2-mode peak level hold selection | ||
+ | * Four-digit electronic tape counter with mode selection (normal/time) | ||
+ | * Rear band control / monitor circuit | ||
+ | * Meter range selectable for more accurate recording level control | ||
+ | * Display switch-off | ||
+ | * Tape reset/playback after reset | ||
+ | * Recording mute to create blank spaces between tracks | ||
+ | * Playback/recording timer start function | ||
+ | * Adjustable headphone jack | ||
+ | * Auto eject (motorized open/close) function | ||
+ | * Title search (up to 15 titles searchable) | ||
+ | * Tape loop prevention automatic ATLC | ||
+ | * gold-plated cinch sockets and headphone socket | ||
+ | * tape flow at 0db = 250nWb/m | ||
+ | |||
+ | == Remarks == | ||
+ | |||
+ | Previous model: | ||
+ | * [[Pioneer CT-900 S]] | ||
+ | |||
+ | Successor model: | ||
+ | * [[Pioneer CT-S 820 S]] | ||
+ | Other models in the same series: | ||
+ | * [[Pioneer CT-S 210|CT-S 210]] | ||
+ | * [[Pioneer CT-S 310|CT-S 310]] | ||
+ | * [[Pioneer CT-S 410|CT-S 410]] | ||
+ | * [[Pioneer CT-S 510|CT-S 510]] | ||
+ | * [[Pioneer CT-S 610|CT-S 610]] | ||
+ | * [[Pioneer CT-S 710|CT-S 710]] | ||
+ | * [[Pioneer CT-S 810 S|CT-S 810 S]] | ||
+ | * [[Pioneer CT-S 910|CT-S 910]] | ||
+ | |||
+ | * The CT-S810S is largely the same as the CT-S610. The CT-S810S is additionally equipped with Dolby S and has higher unit feet. | ||
+ | There are no sockets (Control In/Out) for the system remote control in contrast to the CT-S610. | ||
+ | |||
+ | == Reports == | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | |||
+ | [[File:Cts810s.jpg]] | ||
+ | |||
+ | |||
+ | <gallery> | ||
+ | File:IMG 2853.JPG | ||
+ | File:IMG 3612.JPG | ||
+ | </gallery> | ||
+ | |||
+ | [[Category:Cassette decks]] | ||
+ | [[Category:Dolby-S]] |
Latest revision as of 11:01, 9 December 2019
Contents
Data[edit]
General
- Manufacturer: Pioneer
- Model: CT-S810S
- Type: Single
- Year built: 1992
- Made in: Japan
- Color: black
- Remote control: no
- Power consumption: 23 watts
- Dimensions: 420 x 134 x 323 mm (W x H x D)
- Weight: 7,0 kg
- Original price approx.: 1.000,- DM
Connections
- Number of inputs:
- Line (Input) = 100 mV/54 kOhm
- Number of outputs:
- line (output) = 500 mV/3.2 kOhm
- Headphones = 3.4 mW (load impedance 8 Ohm, Phones Level control max.)
- CD Synchro, jack socket 2.5 mm
Technical Data
- Audio heads: 1 x record and playback combo head (hard permalloy), 1 x erase head (ferrite sendust).
- Motors: 1 x DC servo tone motor, 1 x DC coil motor, 1 x DC auxiliary motor
- Synchronous fluctuation: not more than 0.023% (RMS), not more than 0.056% (DIN).
- Belt types: Normal (Fe), Chrome, Metal
- Frequency response:
- Normal band 15 to 20000 Hz (at recording level -20dB).
- Chrome band 15 to 20000 Hz (at recording level -20dB)
Metal band 15 to 21000 Hz (at recording level -20dB) Distortion factor: < 0.6% (at -4 dB: 160 nWb/m)
- Signal-to-noise ratio: >60 dB,
- with Dolby B: >70 dB (at 5 KHz)
- with Dolby C: >79 dB (at 5 KHz)
- with Dolby S: >82 dB (at 5 KHz)
- Rewind time (C-60 band): 90 seconds
- Auto Reverse: no
- Title search: ± 15 titles
- Dolby: yes, B + C + S + HX-Pro
- MPX filter: yes
- Fader: no
- Pitch control: no
- CD synchro recording: yes
Special Features
- Super Auto BLE system (automatic tape measurement)
- Refrence Master Drive Dual Capstan Drive with Closed Loop Tape Guide
- Level meter with 2-mode peak level hold selection
- Four-digit electronic tape counter with mode selection (normal/time)
- Rear band control / monitor circuit
- Meter range selectable for more accurate recording level control
- Display switch-off
- Tape reset/playback after reset
- Recording mute to create blank spaces between tracks
- Playback/recording timer start function
- Adjustable headphone jack
- Auto eject (motorized open/close) function
- Title search (up to 15 titles searchable)
- Tape loop prevention automatic ATLC
- gold-plated cinch sockets and headphone socket
- tape flow at 0db = 250nWb/m
Remarks[edit]
Previous model:
Successor model:
Other models in the same series:
- The CT-S810S is largely the same as the CT-S610. The CT-S810S is additionally equipped with Dolby S and has higher unit feet.
There are no sockets (Control In/Out) for the system remote control in contrast to the CT-S610.
Reports[edit]
Pictures[edit]