Pioneer CT-S 810 S
Contents
Data[edit]
General
- Manufacturer: Pioneer
- Model: CT-S810S
- Type: Single
- Year built: 1992
- Made in: Japan
- Color: black
- Remote control: no
- Power consumption: 23 watts
- Dimensions: 420 x 134 x 323 mm (W x H x D)
- Weight: 7,0 kg
- Original price approx.: 1.000,- DM
Connections
- Number of inputs:
- Line (Input) = 100 mV/54 kOhm
- Number of outputs:
- line (output) = 500 mV/3.2 kOhm
- Headphones = 3.4 mW (load impedance 8 Ohm, Phones Level control max.)
- CD Synchro, jack socket 2.5 mm
Technical Data
- Audio heads: 1 x record and playback combo head (hard permalloy), 1 x erase head (ferrite sendust).
- Motors: 1 x DC servo tone motor, 1 x DC coil motor, 1 x DC auxiliary motor
- Synchronous fluctuation: not more than 0.023% (RMS), not more than 0.056% (DIN).
- Belt types: Normal (Fe), Chrome, Metal
- Frequency response:
- Normal band 15 to 20000 Hz (at recording level -20dB).
- Chrome band 15 to 20000 Hz (at recording level -20dB)
Metal band 15 to 21000 Hz (at recording level -20dB) Distortion factor: < 0.6% (at -4 dB: 160 nWb/m)
- Signal-to-noise ratio: >60 dB,
- with Dolby B: >70 dB (at 5 KHz)
- with Dolby C: >79 dB (at 5 KHz)
- with Dolby S: >82 dB (at 5 KHz)
- Rewind time (C-60 band): 90 seconds
- Auto Reverse: no
- Title search: ± 15 titles
- Dolby: yes, B + C + S + HX-Pro
- MPX filter: yes
- Fader: no
- Pitch control: no
- CD synchro recording: yes
Special Features
- Super Auto BLE system (automatic tape measurement)
- Refrence Master Drive Dual Capstan Drive with Closed Loop Tape Guide
- Level meter with 2-mode peak level hold selection
- Four-digit electronic tape counter with mode selection (normal/time)
- Rear band control / monitor circuit
- Meter range selectable for more accurate recording level control
- Display switch-off
- Tape reset/playback after reset
- Recording mute to create blank spaces between tracks
- Playback/recording timer start function
- Adjustable headphone jack
- Auto eject (motorized open/close) function
- Title search (up to 15 titles searchable)
- Tape loop prevention automatic ATLC
- gold-plated cinch sockets and headphone socket
- tape flow at 0db = 250nWb/m
Remarks[edit]
Previous model:
Successor model:
Other models in the same series:
- The CT-S810S is largely the same as the CT-S610. The CT-S810S is additionally equipped with Dolby S and has higher unit feet.
There are no sockets (Control In/Out) for the system remote control in contrast to the CT-S610.
Reports[edit]
Pictures[edit]
