Difference between revisions of "Telefunken RC 200"
(11 intermediate revisions by 7 users not shown) | |||
Line 1: | Line 1: | ||
− | 2- | + | __NOTOC__ |
− | 2 | + | == Data == |
− | + | {{navigation}} | |
− | + | '''General''' | |
− | + | * Manufacturer: [[Telefunken]] | |
+ | * Model: RC 200 | ||
+ | * Type: Cassette Tape Deck | ||
+ | * Years of manufacture: 1981 - 1983 | ||
+ | * Made in: Germany | ||
+ | * Color: Silver | ||
+ | * Remote control: no | ||
+ | * Power consumption: | ||
+ | * Dimensions: 435 x 111 x 275 mm (WxHxD). | ||
+ | * Weight: 6.0 kg | ||
+ | * Original price approx.: 599 DM | ||
+ | |||
+ | |||
+ | '''Connections''' | ||
+ | * Number of inputs: | ||
+ | ** Radio: 5pin DIN plug (poles in a semicircle). | ||
+ | Line In: Cinch | ||
+ | Aux/Microphone: 5pin DIN plug (poles in cube) | ||
+ | * Number of outputs: | ||
+ | ** Line Out: Cinch | ||
+ | ** Headphones: 6.3 mm jack | ||
+ | |||
+ | |||
+ | '''Technical Data''' | ||
+ | * Audio heads: 2 | ||
+ | * Motors: 2 | ||
+ | * Synchronous variations: | ||
+ | * Tape types: Fe2O3, CrO2, FeCr and metal (= metal pigment) tapes on compact cassettes. | ||
+ | * Frequency response: 30 - 20,000 Hz (for all tape types) | ||
+ | * Distortion factor: measured at 10 kHz in each case: | ||
+ | ** Fe2O3/FeCr: ≥ 1 % | ||
+ | CrO2: ≥ 3 % | ||
+ | Metal: ≥ 2 % | ||
+ | * Signal-to-noise ratio: each measured with noise suppression system "High Com": | ||
+ | ** Fe2O3: ≥ 74 dB | ||
+ | FeCr: ≥ 75 dB | ||
+ | CrO2: ≥ 78 dB | ||
+ | Metal: ≥ 77 dB | ||
+ | * Auto Reverse: no | ||
+ | * Title search: no | ||
+ | * Dolby: no, instead "High Com", for playing Dolby cassettes the "High-Com" switch can be switched to quasi "Dolby", so that the cassettes can be heard aurally correct. However, it's not a licensed Dolby, but a proprietary development by Telefunken. | ||
+ | MPX filter: yes | ||
+ | * Fader: | ||
+ | * Pitch control: no | ||
+ | * CD synchro recording: neim | ||
+ | |||
+ | |||
+ | '''Special Features''' | ||
+ | * There is no "classic" cassette compartment cover. When the cassette is removed, fingers touch movable switch covers to the left and right of the cassette, triggering a cassette stop. | ||
+ | The drive functions (raising or lowering the mechanism) are performed by a magnet. Thus the mechanism is not moved slowly, but "abruptly". This results in a very audible "impact noise". | ||
+ | |||
+ | |||
+ | == Remarks == | ||
+ | * Other models of the same series: | ||
+ | * [[Telefunken RC 100]] | ||
+ | * [[Telefunken RC 200]] | ||
+ | * [[Telefunken RC 300]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Picture: Telefunken RC 200 | ||
+ | [[image:Telefunken1_Cassette_deck_RC_200.jpg]] | ||
+ | |||
+ | |||
+ | * Picture: Telefunken RC 200 | ||
+ | [[image:Telefunken2_Cassette_deck_RC_200.jpg]] | ||
+ | |||
+ | |||
+ | == Reports == | ||
+ | |||
+ | |||
+ | == Links == | ||
+ | |||
+ | |||
+ | [[Category:Cassette decks]] |
Latest revision as of 00:25, 5 June 2020
Data[edit]
General
- Manufacturer: Telefunken
- Model: RC 200
- Type: Cassette Tape Deck
- Years of manufacture: 1981 - 1983
- Made in: Germany
- Color: Silver
- Remote control: no
- Power consumption:
- Dimensions: 435 x 111 x 275 mm (WxHxD).
- Weight: 6.0 kg
- Original price approx.: 599 DM
Connections
- Number of inputs:
- Radio: 5pin DIN plug (poles in a semicircle).
Line In: Cinch Aux/Microphone: 5pin DIN plug (poles in cube)
- Number of outputs:
- Line Out: Cinch
- Headphones: 6.3 mm jack
Technical Data
- Audio heads: 2
- Motors: 2
- Synchronous variations:
- Tape types: Fe2O3, CrO2, FeCr and metal (= metal pigment) tapes on compact cassettes.
- Frequency response: 30 - 20,000 Hz (for all tape types)
- Distortion factor: measured at 10 kHz in each case:
- Fe2O3/FeCr: ≥ 1 %
CrO2: ≥ 3 % Metal: ≥ 2 %
- Signal-to-noise ratio: each measured with noise suppression system "High Com":
- Fe2O3: ≥ 74 dB
FeCr: ≥ 75 dB CrO2: ≥ 78 dB Metal: ≥ 77 dB
- Auto Reverse: no
- Title search: no
- Dolby: no, instead "High Com", for playing Dolby cassettes the "High-Com" switch can be switched to quasi "Dolby", so that the cassettes can be heard aurally correct. However, it's not a licensed Dolby, but a proprietary development by Telefunken.
MPX filter: yes
- Fader:
- Pitch control: no
- CD synchro recording: neim
Special Features
- There is no "classic" cassette compartment cover. When the cassette is removed, fingers touch movable switch covers to the left and right of the cassette, triggering a cassette stop.
The drive functions (raising or lowering the mechanism) are performed by a magnet. Thus the mechanism is not moved slowly, but "abruptly". This results in a very audible "impact noise".
Remarks[edit]
- Other models of the same series:
- Telefunken RC 100
- Telefunken RC 200
- Telefunken RC 300
Pictures[edit]
- Picture: Telefunken RC 200
File:Telefunken1 Cassette deck RC 200.jpg
- Picture: Telefunken RC 200
File:Telefunken2 Cassette deck RC 200.jpg