Difference between revisions of "Aiwa XA-950"
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Aiwa]] |
| − | * | + | * Model: XA-950 |
| − | * | + | * Type: Integrated amplifier |
| − | * | + | * Years of manufacture: 1992 - 1996 |
| − | * | + | * Made in: Singapore |
| − | * | + | * Color: Black |
| − | * | + | * Remote control: yes |
| − | * | + | * Power consumption: 300 W max. |
| − | * | + | * Dimensions: 430 x 140 x 340 mm (WxHxD) |
| − | * | + | * Weight: 10.5 kg |
| − | * | + | * Original price approx.: 900 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 6 |
| − | + | 1 PHONO (MM; MC) (2.5 mV/47 kOhm; 0.2 mV/100 Ohm) | |
** 1 TUNER (150 mV/47 kOhm) | ** 1 TUNER (150 mV/47 kOhm) | ||
** 2 TAPE/DAT (150 mV/47 kOhm) | ** 2 TAPE/DAT (150 mV/47 kOhm) | ||
| Line 24: | Line 24: | ||
** [1 ADAPTOR (150 mV/47 kOhm)] | ** [1 ADAPTOR (150 mV/47 kOhm)] | ||
| − | * | + | * Number of outputs: 5 |
** 2 TAPE/DAT (150 mV/47 kOhm) | ** 2 TAPE/DAT (150 mV/47 kOhm) | ||
| − | ** 1 | + | ** 1 headphone (8 Ohm - 32 Ohm) |
| − | ** 2 | + | ** 2 speaker pairs (A/B 4 Ohm - 16 Ohm; A+B 8 Ohm - 16 Ohm) |
** [1 ADAPTOR (150 mV/47 kOhm)] | ** [1 ADAPTOR (150 mV/47 kOhm)] | ||
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power (at distortion factor) |
| − | ** 8 Ohm: 2 x 100 W (0 | + | ** 8 Ohm: 2 x 100 W (0.9%, 1 kHz) |
| − | ** 4 Ohm: 2 x 150 W (0 | + | ** 4 Ohm: 2 x 150 W (0.9%, 1 kHz) |
| − | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
| − | * | + | * Total harmonic distortion: 0.005% (20 Hz - 20 kHz, 75 W, 8 ohms) |
| − | * | + | * Power bandwidth (both channels driven, 8 ohms): 5 Hz - 70 kHz (less than 0.05%) |
| − | * | + | * Frequency response: 5 Hz - 150 kHz (+0 dB/-1 dB) |
| − | * | + | * Signal-to-noise ratio: |
| − | ** PHONO MM 95 dB (5 mV | + | ** PHONO MM 95 dB (5 mV input). |
| − | + | PHONO MC 75 dB (0.5 mV input) | |
| − | ** TUNER, CD, VIDEO/AUX, TAPE/DAT, ADAPTOR 110 dB | + | ** TUNER, CD, VIDEO/AUX, TAPE/DAT, ADAPTOR 110 dB. |
| − | * | + | * Tone control: |
| − | ** Bass: | + | ** Bass: yes |
| − | + | Treble: yes | |
| − | * Loudness: | + | * Loudness: yes |
| − | * High Filter: | + | * High Filter: no |
| − | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): yes, 16 Hz (-12 dB/Oct) |
| − | * Mute: | + | * Mute: yes |
| − | * Direct/Line-Straight: | + | * Direct/Line-Straight: yes |
| − | + | * More data at "Hifi Engine": [https://www.hifiengine.com/manual_library/aiwa/xa-950.shtml] | |
| − | * | ||
| − | == | + | '''Special Features''' |
| − | * | + | * Separable power amplifier via ADAPTOR IN/OUT |
| − | * | + | |
| + | |||
| + | == Remarks == | ||
| + | * Other models in the same series: | ||
| + | * Integrated amplifier: | ||
* [[Aiwa XA-003]] | * [[Aiwa XA-003]] | ||
* [[Aiwa XA-005]] | * [[Aiwa XA-005]] | ||
| Line 69: | Line 72: | ||
* [[Aiwa XA-950]] | * [[Aiwa XA-950]] | ||
| + | |||
| + | * [[Tuner]] | ||
| + | * [[Aiwa XT-003]] | ||
| + | * [[Aiwa XT-950]] | ||
| + | |||
| + | |||
| + | * CD player: | ||
| + | * [[Aiwa XC-300]] | ||
| + | * [[Aiwa XC-550]] | ||
| + | * [[Aiwa XC-750]] | ||
| + | * [[Aiwa XC-900]] | ||
| + | |||
| + | |||
| + | * [[CD Player Portable]] | ||
| + | * [[Aiwa XP-3]] | ||
| + | * [[Aiwa XP-6]] | ||
| + | * [[Aiwa XP-7]] | ||
| + | |||
| + | |||
| + | * [[Tape Deck]] | ||
| + | * [[Aiwa AD-F 410]] | ||
| + | * [[Aiwa AD-F 500]] | ||
| + | * [[Aiwa AD-F 810]] | ||
| + | * [[Aiwa AD-F 910]] | ||
| + | * [[Aiwa AD-R 505]] | ||
| + | * [[Aiwa AD-R 707]] | ||
| + | * [[Aiwa AD-WX 515]] | ||
| + | * [[Aiwa AD-WX 616]] | ||
| + | * [[Aiwa AD-WX 707]] | ||
| + | * [[Aiwa AD-WX 717]] | ||
| + | * [[Aiwa AD-WX 727]] | ||
| + | * [[Aiwa AD-WX 777]] | ||
| + | * [[Aiwa AD-WX 808]] | ||
| + | * [[Aiwa AD-WX 828]] | ||
| + | * [[Aiwa AD-WX 888]] | ||
| + | * [[Aiwa AD-WX 909]] | ||
| + | * [[Aiwa AD-WX 929]] | ||
| + | * [[Aiwa AD-WX 999]] | ||
| + | * [[Aiwa XK-S 7000]] | ||
| + | * [[Aiwa XK-S 9000]] | ||
| − | == | + | == Pictures == |
| − | * | + | * [[Picture: Aiwa XA-950 |
| − | [[ | + | [[File:Aiwa AX-950-1992.jpg]] |
| − | * | + | * Image: Aiwa XA-950 |
| − | [[ | + | [[File:Aiwa AX-950-1992.jpg]] |
| − | == | + | == Reviews == |
| − | * Top | + | * Top of the line model from Aiwa in the early 90s in the pre-Sony era. Sold at least in 1992 and 1993 with the additional designation "Evolution Series". Sound-wise quite appealing unit, which didn't have to hide from the competition. Had no lobby then, has no lobby today - a blessing for the used buyer. |
| − | + | The XA-950Z was Aiwa`s top-of-the-line integrated amplifier at the beginning of the nineties and came off the production line at the then Aiwa Technology Park in Newbridge/South Wales. Which makes it "Made in UK", but of course the amp is clearly a Japanese late eighties design - with that certain likeable Aiwa touch. | |
| − | Aiwa Technology Park in Newbridge/South Wales | + | If the line driver wasn't also an opamp stage but a discrete Class-A circuit, the XA-950Z would be about the same quality as a mid-range Sony ES amp (5s or 6s). More or less, because it lacks a bit of the solidity and haptic quality of an ES amp, but you can't hear that. |
| − | + | The phono preamplifier is built economically but is not an "afterthought" like amps from e.g. Yamaha (5er) or middle Kenwood's from the time and qualitatively a step better equipped like e.g. a Sony TA-F400 (or a TA-FA3ES/TA-F5xxES). The power amps are a SIPP-KISS design with the 2SC2922/2SA1216 combo, bipolar throughout and powered by a fairly soft power supply. By the way, the power supply of the phono preamplifier passes through two active filter stages. So, within the limits of a tight budget, a lot of thought has been put into this, which is commendable since it is by no means a matter of course. | |
| − | + | The opamp equipment in the preamplifier consists of NJM2068D types, which is comparatively high-quality and their supply does not exceed ± 15V. | |
| − | + | As mentioned above, the XA-950Z is a very appealing sounding device in factory condition and offers an upper mid-range sound without any advertising-effective material battle. From today's perspective, with modern OpAmps and a selective-specific component upgrade there is still a lot that can be done relatively easily. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| Line 105: | Line 136: | ||
| − | [[ | + | [[Category:Integrated amplifier]] |
Latest revision as of 10:39, 25 June 2020
Data[edit]
General
- Manufacturer: Aiwa
- Model: XA-950
- Type: Integrated amplifier
- Years of manufacture: 1992 - 1996
- Made in: Singapore
- Color: Black
- Remote control: yes
- Power consumption: 300 W max.
- Dimensions: 430 x 140 x 340 mm (WxHxD)
- Weight: 10.5 kg
- Original price approx.: 900 DM
Connections
- Number of inputs: 6
1 PHONO (MM; MC) (2.5 mV/47 kOhm; 0.2 mV/100 Ohm)
- 1 TUNER (150 mV/47 kOhm)
- 2 TAPE/DAT (150 mV/47 kOhm)
- 1 AUX (150 mV/47 kOhm)
- 1 CD (150 mV/47 kOhm)
- [1 ADAPTOR (150 mV/47 kOhm)]
- Number of outputs: 5
- 2 TAPE/DAT (150 mV/47 kOhm)
- 1 headphone (8 Ohm - 32 Ohm)
- 2 speaker pairs (A/B 4 Ohm - 16 Ohm; A+B 8 Ohm - 16 Ohm)
- [1 ADAPTOR (150 mV/47 kOhm)]
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2 x 100 W (0.9%, 1 kHz)
- 4 Ohm: 2 x 150 W (0.9%, 1 kHz)
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.005% (20 Hz - 20 kHz, 75 W, 8 ohms)
- Power bandwidth (both channels driven, 8 ohms): 5 Hz - 70 kHz (less than 0.05%)
- Frequency response: 5 Hz - 150 kHz (+0 dB/-1 dB)
- Signal-to-noise ratio:
- PHONO MM 95 dB (5 mV input).
PHONO MC 75 dB (0.5 mV input)
- TUNER, CD, VIDEO/AUX, TAPE/DAT, ADAPTOR 110 dB.
- Tone control:
- Bass: yes
Treble: yes
- Loudness: yes
- High Filter: no
- Low Filter (Subsonic): yes, 16 Hz (-12 dB/Oct)
- Mute: yes
- Direct/Line-Straight: yes
- More data at "Hifi Engine": [1]
Special Features
- Separable power amplifier via ADAPTOR IN/OUT
Remarks[edit]
- Other models in the same series:
- Integrated amplifier:
- Aiwa XA-003
- Aiwa XA-005
- Aiwa XA-006
- Aiwa XA-007
- Aiwa XA-008
- Aiwa XA-950
- CD player:
- Aiwa XC-300
- Aiwa XC-550
- Aiwa XC-750
- Aiwa XC-900
- Tape Deck
- Aiwa AD-F 410
- Aiwa AD-F 500
- Aiwa AD-F 810
- Aiwa AD-F 910
- Aiwa AD-R 505
- Aiwa AD-R 707
- Aiwa AD-WX 515
- Aiwa AD-WX 616
- Aiwa AD-WX 707
- Aiwa AD-WX 717
- Aiwa AD-WX 727
- Aiwa AD-WX 777
- Aiwa AD-WX 808
- Aiwa AD-WX 828
- Aiwa AD-WX 888
- Aiwa AD-WX 909
- Aiwa AD-WX 929
- Aiwa AD-WX 999
- Aiwa XK-S 7000
- Aiwa XK-S 9000
Pictures[edit]
- [[Picture: Aiwa XA-950
- Image: Aiwa XA-950
Reviews[edit]
- Top of the line model from Aiwa in the early 90s in the pre-Sony era. Sold at least in 1992 and 1993 with the additional designation "Evolution Series". Sound-wise quite appealing unit, which didn't have to hide from the competition. Had no lobby then, has no lobby today - a blessing for the used buyer.
The XA-950Z was Aiwa`s top-of-the-line integrated amplifier at the beginning of the nineties and came off the production line at the then Aiwa Technology Park in Newbridge/South Wales. Which makes it "Made in UK", but of course the amp is clearly a Japanese late eighties design - with that certain likeable Aiwa touch. If the line driver wasn't also an opamp stage but a discrete Class-A circuit, the XA-950Z would be about the same quality as a mid-range Sony ES amp (5s or 6s). More or less, because it lacks a bit of the solidity and haptic quality of an ES amp, but you can't hear that. The phono preamplifier is built economically but is not an "afterthought" like amps from e.g. Yamaha (5er) or middle Kenwood's from the time and qualitatively a step better equipped like e.g. a Sony TA-F400 (or a TA-FA3ES/TA-F5xxES). The power amps are a SIPP-KISS design with the 2SC2922/2SA1216 combo, bipolar throughout and powered by a fairly soft power supply. By the way, the power supply of the phono preamplifier passes through two active filter stages. So, within the limits of a tight budget, a lot of thought has been put into this, which is commendable since it is by no means a matter of course. The opamp equipment in the preamplifier consists of NJM2068D types, which is comparatively high-quality and their supply does not exceed ± 15V. As mentioned above, the XA-950Z is a very appealing sounding device in factory condition and offers an upper mid-range sound without any advertising-effective material battle. From today's perspective, with modern OpAmps and a selective-specific component upgrade there is still a lot that can be done relatively easily.