Difference between revisions of "Technics SL-L 3"
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Technics]] |
| − | * | + | * Model: SL-L 3 |
| − | * | + | * Type: Tangential turntable |
| − | * | + | * Years of manufacture: 1985 - 1990 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Anthracite/Black, Silver |
| − | * | + | * Power consumption: 14 W |
| − | * | + | * Dimensions: 430 x 90 x 350 mm (WxHxD) (Maximum height when top is fully open) 390mm |
| − | * | + | * Weight: 5,2 kg |
| − | * | + | * Original price approx.: 798 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Outputs: 2 x Cinch red/white + GND |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Drive: direct drive, quartz control QPL |
| − | * Motor: | + | * Motor: quartz-controlled, phase-locked DC motor |
| − | * | + | * Speed: 33 1/3, 45 rpm (manual selection possible) |
| − | * | + | * Variation in synchronism: 0.012% WRMS (JIS 5521), ± 0.035% (IEC 98A) |
| − | * | + | ** Measured by signals from built-in frequency generator of motor section |
| − | ** IEC 98A | + | * Rumble noise ratio: |
| − | ** IEC 98A | + | ** IEC 98A unweighted: -56 dB |
| − | * | + | ** IEC 98A rated: -78 dB |
| − | * | + | * Turntable: Injection moulded aluminium, Ø 300 mm |
| − | * | + | * Operating mode: Fully automatic Programmable |
| − | ** | + | * Tonearm: Linear tracking tangential tonearm |
| − | ** TP4 | + | ** Drive: DC motor |
| − | ** | + | ** TP4 system |
| − | ** | + | ** effective tonearm mass: 6 g |
| − | ** | + | ** effective arm length: 150 mm |
| + | ** sampling error angle: ± 0,1° . | ||
| + | . | ||
| + | '''Tonearm''' | ||
| + | * Type: Linear tracking tangential tonearm with cardan suspension with 4-point pivot bearing. | ||
| + | * Drive: DC motor / TP4 system | ||
| + | * Effective tonearm mass: 9g (including pickup) | ||
| + | * Effective arm length: 105 mm | ||
| + | * Pickup error angle: ± 0,1° * Resonance frequency: 12 Hz | ||
| + | * Resonant frequency: 12 Hz | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| + | '''Pickup''' | ||
| + | * Model: EPC-P33 - MM system | ||
| + | * Type: Moving magnet stereo pickup | ||
| + | * Magnetic circuit: Full lamella core | ||
| + | * Frequency response: 10 Hz - 50 kHz, 20 Hz - 10 kHz, ± 1 dB | ||
| + | * Output voltage: 2.5 mV at 1kHz 5cm/sec. zero-to-peak, lateral [7mV at 1kHz 10cm/sec, zero-to-peak, 45° (DIN 45 500)] | ||
| + | * Channel separation: 22 dB at 1kHz | ||
| + | * Channel balance: within 1.8dB at 1 kHz | ||
| + | * Terminal impedance: 47kΩ ~ 100kΩ. | ||
| + | * Compliance: 12 x 10ˉ6 cm/dyn at 100 Hz. | ||
| + | * Pickup mass: 6 g (pickup only). | ||
| + | * Tracking force: 1.25g ± 0.25g (12.5N ± 2.5N) (not adjustable). | ||
| + | * Replacement needle: EPS-33ES (elliptical) | ||
| + | |||
| − | ''' | + | '''Special Features''' |
| − | * | + | * Features: |
| + | ** Auto-start | ||
| + | ** Auto-feed | ||
| + | ** Auto-return | ||
| + | ** Auto-Stop | ||
| + | ** Repeat play | ||
| + | ** Program play | ||
| + | ** Direct music selection | ||
| + | ** Forward and backward skip playback | ||
| + | ** Forward and reverse seek playback | ||
| + | ** Automatic record size selection | ||
| + | ** Record detection | ||
| + | * Programmable, very safe operation through full automatic - only possible with closed hood | ||
| + | * Very safe operation by full automatic - only possible with closed hood | ||
| + | * Record size and title beginnings are detected by the unit | ||
| + | * Skip, repeat and cueing function. | ||
| − | == | + | == Remarks == |
| − | * | + | * Other models in the same series: |
* [[Technics SL-L 1]] | * [[Technics SL-L 1]] | ||
* [[Technics SL-L 3]] | * [[Technics SL-L 3]] | ||
| − | == | + | == Pictures == |
| − | * | + | * Image: Technics SL-L3 |
| − | [[ | + | [[File:Technics SL-L3.jpg]] |
| − | + | * Excerpt from brochure: Technics SL-L 3 | |
| − | + | [[File:Technics SL-L 3-Prospekt-1988.jpg]] | |
| − | == | + | == Reports == |
| − | + | == Links == | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | === | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | [[ | + | [[Category:Turntables]] |
Latest revision as of 09:21, 29 February 2020
Data[edit]
General
- Manufacturer: Technics
- Model: SL-L 3
- Type: Tangential turntable
- Years of manufacture: 1985 - 1990
- Made in: Japan
- Color: Anthracite/Black, Silver
- Power consumption: 14 W
- Dimensions: 430 x 90 x 350 mm (WxHxD) (Maximum height when top is fully open) 390mm
- Weight: 5,2 kg
- Original price approx.: 798 DM
Connections
- Outputs: 2 x Cinch red/white + GND
Technical Data
- Drive: direct drive, quartz control QPL
- Motor: quartz-controlled, phase-locked DC motor
- Speed: 33 1/3, 45 rpm (manual selection possible)
- Variation in synchronism: 0.012% WRMS (JIS 5521), ± 0.035% (IEC 98A)
- Measured by signals from built-in frequency generator of motor section
- Rumble noise ratio:
- IEC 98A unweighted: -56 dB
- IEC 98A rated: -78 dB
- Turntable: Injection moulded aluminium, Ø 300 mm
- Operating mode: Fully automatic Programmable
- Tonearm: Linear tracking tangential tonearm
- Drive: DC motor
- TP4 system
- effective tonearm mass: 6 g
- effective arm length: 150 mm
- sampling error angle: ± 0,1° .
.
Tonearm
- Type: Linear tracking tangential tonearm with cardan suspension with 4-point pivot bearing.
- Drive: DC motor / TP4 system
- Effective tonearm mass: 9g (including pickup)
- Effective arm length: 105 mm
- Pickup error angle: ± 0,1° * Resonance frequency: 12 Hz
- Resonant frequency: 12 Hz
Pickup
- Model: EPC-P33 - MM system
- Type: Moving magnet stereo pickup
- Magnetic circuit: Full lamella core
- Frequency response: 10 Hz - 50 kHz, 20 Hz - 10 kHz, ± 1 dB
- Output voltage: 2.5 mV at 1kHz 5cm/sec. zero-to-peak, lateral [7mV at 1kHz 10cm/sec, zero-to-peak, 45° (DIN 45 500)]
- Channel separation: 22 dB at 1kHz
- Channel balance: within 1.8dB at 1 kHz
- Terminal impedance: 47kΩ ~ 100kΩ.
- Compliance: 12 x 10ˉ6 cm/dyn at 100 Hz.
- Pickup mass: 6 g (pickup only).
- Tracking force: 1.25g ± 0.25g (12.5N ± 2.5N) (not adjustable).
- Replacement needle: EPS-33ES (elliptical)
Special Features
- Features:
- Auto-start
- Auto-feed
- Auto-return
- Auto-Stop
- Repeat play
- Program play
- Direct music selection
- Forward and backward skip playback
- Forward and reverse seek playback
- Automatic record size selection
- Record detection
- Programmable, very safe operation through full automatic - only possible with closed hood
- Very safe operation by full automatic - only possible with closed hood
- Record size and title beginnings are detected by the unit
- Skip, repeat and cueing function.
Remarks[edit]
- Other models in the same series:
- Technics SL-L 1
- Technics SL-L 3
Pictures[edit]
- Image: Technics SL-L3
- Excerpt from brochure: Technics SL-L 3
