Technics SL-L 3

Data[edit]

General

Manufacturer: Technics
Model: SL-L 3
Type: Tangential turntable
Years of manufacture: 1985 - 1990
Made in: Japan
Color: Anthracite/Black, Silver
Power consumption: 14 W
Dimensions: 430 x 90 x 350 mm (WxHxD) (Maximum height when top is fully open) 390mm
Weight: 5,2 kg
Original price approx.: 798 DM

Connections

Technical Data

Drive: direct drive, quartz control QPL
Motor: quartz-controlled, phase-locked DC motor
Speed: 33 1/3, 45 rpm (manual selection possible)
Variation in synchronism: 0.012% WRMS (JIS 5521), ± 0.035% (IEC 98A)
- Measured by signals from built-in frequency generator of motor section
Rumble noise ratio:
- IEC 98A unweighted: -56 dB
- IEC 98A rated: -78 dB
Turntable: Injection moulded aluminium, Ø 300 mm
Operating mode: Fully automatic Programmable
Tonearm: Linear tracking tangential tonearm
- Drive: DC motor
- TP4 system
- effective tonearm mass: 6 g
- effective arm length: 150 mm
- sampling error angle: ± 0,1° .

.

Tonearm

Type: Linear tracking tangential tonearm with cardan suspension with 4-point pivot bearing.
Drive: DC motor / TP4 system
Effective tonearm mass: 9g (including pickup)
Effective arm length: 105 mm
Pickup error angle: ± 0,1° * Resonance frequency: 12 Hz
Resonant frequency: 12 Hz

Pickup

Model: EPC-P33 - MM system
Type: Moving magnet stereo pickup
Magnetic circuit: Full lamella core
Frequency response: 10 Hz - 50 kHz, 20 Hz - 10 kHz, ± 1 dB
Output voltage: 2.5 mV at 1kHz 5cm/sec. zero-to-peak, lateral [7mV at 1kHz 10cm/sec, zero-to-peak, 45° (DIN 45 500)]
Channel separation: 22 dB at 1kHz
Channel balance: within 1.8dB at 1 kHz
Terminal impedance: 47kΩ ~ 100kΩ.
Compliance: 12 x 10ˉ6 cm/dyn at 100 Hz.
Pickup mass: 6 g (pickup only).
Tracking force: 1.25g ± 0.25g (12.5N ± 2.5N) (not adjustable).
Replacement needle: EPS-33ES (elliptical)

Special Features

Features:
- Auto-start
- Auto-feed
- Auto-return
- Auto-Stop
- Repeat play
- Program play
- Direct music selection
- Forward and backward skip playback
- Forward and reverse seek playback
- Automatic record size selection
- Record detection
Programmable, very safe operation through full automatic - only possible with closed hood
Very safe operation by full automatic - only possible with closed hood
Record size and title beginnings are detected by the unit
Skip, repeat and cueing function.