Difference between revisions of "Yamaha DSP-E 492"

m
 
(11 intermediate revisions by 5 users not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Daten ==
+
== Data ==
{{Navigation}}
+
{{navigation}}
'''Allgemein'''
+
'''General'''
* Hersteller: [[Yamaha]]
+
* Manufacturer: [[Yamaha]]
* Modell: DSP-E492
+
* Model: DSP-E 492
* Baujahre:
+
* Years of manufacture:
* Hergestellt in:
+
* Manufactured in:
* Farbe: Schwarz/titan
+
* Color: Black, Titanium
* Fernbedienung: ja
+
* Remote control: yes
* Leistungsaufnahme:
+
* Power consumption: 200 watts, 600 watts max.
* Abmessungen:
+
* Dimensions: 435 x 126 x 390 mm (W x H x D)
* Gewicht:
+
* Weight: 8,5 Kg
* Neupreis ca.:
+
* New price approx.:600DM
  
  
'''Anschlüsse'''
+
'''Connections'''
* Anzahl der Eingänge: 4x Stereo, 1x Tape, 1x DVD Stereo+5.1, 5.1 Eingang
+
* Number of inputs:
* Anzahl der Ausgänge: Lautsprecher Center+Surround, Front, Sub out
+
** 2x Line, DVD, TV, Tape, VCR, 5.1, 5.1 Discrete.
 +
** 3x Video-In
  
 +
* Number of outputs:
 +
** 2x Rec-Out
 +
** Pre-Out Main
 +
** Pre-Out Rear
 +
2x Mono Pre-Out Center
 +
** 2x Mono Pre-Out Subwoofer
 +
** Loudspeaker Center and Rear
 +
** Video Rec-Out
 +
** Video Monitor Out
 +
** 1x switched mains output
  
'''Technische Daten'''
+
'''Technical Data'''
  
 
''Audio/Video''
 
''Audio/Video''
* Kanäle:
+
* Channels:
* TV-Norm:
+
* TV standard:
* A/D-Wandler: nein
+
* A/D converter: no
* D/A-Wandler: nein
+
* D/A converter: no
* Ausgangsleistung (bei Klirrfaktor)
+
* Output power (at distortion).
** Stereo: n.a.
+
** Center: 70 W into 4 ohms at 0.7%
** Front: n.a.
+
Rear: 2x 70 W into 4 Ohm at 0.7% ** Surround Back: n.a.
** Center: 60W
+
Surround Back: n.a.
** Rear: 2x60W
+
* Dynamic power (at distortion factor)
 +
** Center: 160 W into 4 Ohm
 +
Rear: 2x 160 W into 4 Ohm
 
** Surround Back: n.a.
 
** Surround Back: n.a.
* Dynamikleistung (bei Klirrfaktor)
+
* Total harmonic distortion: 0.06%
** Stereo: n.a.
+
* Attenuation factor: > 200 into 8 Ohm
** Front: n.a.
+
* Frequency response: 10 - 60,000 Hz
** Center: 100W
+
* Signal-to-noise ratio: > 95 dB
** Rear: 2x100W
+
* Stereo channel separation: > 70 dB
** Surround Back: n.a.
+
* Tone control: none
* Gesamtklirrfaktor:
+
* Loudness: no
* Dämpfungsfaktor:
+
* Subsonic: no
* Frequenzgang:
+
* Mute: no
* Signalrauschabstand:
+
* Pure-Direct/Line-Straight: 5.1 input
* Stereokanaltrennung:
+
* Time Correction: no
* Klangregelung: keine
+
* Bass Management: no
* Loudness: nein
+
* Delay adjustment (Lip Sync): no
* Subsonic: nein
+
* DSP programs: 7
* Mute: nein
 
* Pure-Direct/Line-Straight: 5.1 Eingang
 
* Laufzeitkorrektur:
 
* Bassmanagement: nein
 
* Verzögerungsanpassung (Lip Sync):
 
* DSP-Programme:
 
  
  
''Tonformate''
+
''Sound Formats''
 
* Dolby Surround Pro Logic
 
* Dolby Surround Pro Logic
  
  
'''Besondere Ausstattungen'''
+
'''Special Features'''
* Surround Prozessor mit 3-Kanal Endstufe zur Ergänzung vorhandener Stereo Verstärker
+
* Surround processor with 3-channel power amplifier to supplement existing stereo amplifiers
  
== Bemerkungen ==
+
== Remarks ==
Weitere Modelle der gleichen Serie:
 
  
== Bilder ==
+
The main weakness of the DSP-E 492 is a conceptual one,because in fact the device does not serve as a configurable
 +
3 channel extension of an existing stereo system,but degrades the existing integrated amplifier or receiver to the
 +
power amplifier for the front channels. This is still ok for a mid-range system. But if you already have a top class stereo system
 +
who sacrifices the quality of the existing preamplifier to this 3-channel extension for 5.1 surround sound.
 +
In addition, the configuration options for adapting to the existing spatiality are simply not sufficient.
 +
While the power amplifiers are discretely constructed and offer good reproduction quality, the preamplifier is an opamp grave of the inexpensive variety.
 +
cheap variety. No wonder that this device is quite often found, for example, on Ebay.
  
== Berichte ==
+
== Pictures ==
 +
[[File:Yamaha DSP - E 492.jpg]]
 +
== Reports ==
  
 
== Links ==
 
== Links ==
  
[[Kategorie:A/V-Verstärker]]
+
[[Category:Surround decoder]]

Latest revision as of 10:47, 4 September 2016

Data[edit]

General

  • Manufacturer: Yamaha
  • Model: DSP-E 492
  • Years of manufacture:
  • Manufactured in:
  • Color: Black, Titanium
  • Remote control: yes
  • Power consumption: 200 watts, 600 watts max.
  • Dimensions: 435 x 126 x 390 mm (W x H x D)
  • Weight: 8,5 Kg
  • New price approx.:600DM


Connections

  • Number of inputs:
    • 2x Line, DVD, TV, Tape, VCR, 5.1, 5.1 Discrete.
    • 3x Video-In
  • Number of outputs:
    • 2x Rec-Out
    • Pre-Out Main
    • Pre-Out Rear

2x Mono Pre-Out Center

    • 2x Mono Pre-Out Subwoofer
    • Loudspeaker Center and Rear
    • Video Rec-Out
    • Video Monitor Out
    • 1x switched mains output

Technical Data

Audio/Video

  • Channels:
  • TV standard:
  • A/D converter: no
  • D/A converter: no
  • Output power (at distortion).
    • Center: 70 W into 4 ohms at 0.7%

Rear: 2x 70 W into 4 Ohm at 0.7% ** Surround Back: n.a. Surround Back: n.a.

  • Dynamic power (at distortion factor)
    • Center: 160 W into 4 Ohm

Rear: 2x 160 W into 4 Ohm

    • Surround Back: n.a.
  • Total harmonic distortion: 0.06%
  • Attenuation factor: > 200 into 8 Ohm
  • Frequency response: 10 - 60,000 Hz
  • Signal-to-noise ratio: > 95 dB
  • Stereo channel separation: > 70 dB
  • Tone control: none
  • Loudness: no
  • Subsonic: no
  • Mute: no
  • Pure-Direct/Line-Straight: 5.1 input
  • Time Correction: no
  • Bass Management: no
  • Delay adjustment (Lip Sync): no
  • DSP programs: 7


Sound Formats

  • Dolby Surround Pro Logic


Special Features

  • Surround processor with 3-channel power amplifier to supplement existing stereo amplifiers

Remarks[edit]

The main weakness of the DSP-E 492 is a conceptual one,because in fact the device does not serve as a configurable 3 channel extension of an existing stereo system,but degrades the existing integrated amplifier or receiver to the power amplifier for the front channels. This is still ok for a mid-range system. But if you already have a top class stereo system who sacrifices the quality of the existing preamplifier to this 3-channel extension for 5.1 surround sound. In addition, the configuration options for adapting to the existing spatiality are simply not sufficient. While the power amplifiers are discretely constructed and offer good reproduction quality, the preamplifier is an opamp grave of the inexpensive variety. cheap variety. No wonder that this device is quite often found, for example, on Ebay.

Pictures[edit]

Yamaha DSP - E 492.jpg

Reports[edit]

Links[edit]