Difference between revisions of "Hitachi SR-802"
m (→Bilder) |
|||
| (4 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Hitachi]] |
| − | * | + | * Model: SR-802 |
| − | * | + | * Type: Receiver |
| − | * | + | * Years of manufacture: 1975 - 1977 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Black or Silver |
| − | * | + | * Remote control: |
| − | * | + | * Power Consumption: |
| − | * | + | * Dimensions: 490 x 144 x 400 mm (WxHxD). |
| − | * | + | * Weight: 12,8 kg |
| − | * | + | * Original price approx.: 1'050 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
| − | ** Phono MM: 2 | + | ** Phono MM: 2.5 mV / 47 kOhm, 200 mV max. |
| − | + | AUX: 150 mV / 20 kOhm, 5 V max. | |
| − | + | Tape Play: 150 mV / 20 kOhm, 5 V max. | |
| − | + | FM antenna socket: 75 Ohm coaxial | |
| − | + | VHF / MW antenna socket: 300 Ohm | |
| − | * | + | * Number of outputs: |
** Tape Rec: 150 mV | ** Tape Rec: 150 mV | ||
| − | + | Tape Rec DIN: 40 mV | |
| − | ** | + | ** Headphones: 6,3mm jack plug |
| − | ** 2 | + | ** 2 pairs of loudspeakers |
| − | ''' | + | '''Technical Data''' |
| − | '' | + | ''Amplifier'' |
| − | * | + | * Continuous power (at distortion factor) |
| − | + | 8 Ohm: 2 x 50 Watt | |
** 4 Ohm: 2 x 70 Watt | ** 4 Ohm: 2 x 70 Watt | ||
| − | * | + | * Dynamic power: |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
| − | * | + | * Total harmonic distortion: < 0.5 % |
| − | * | + | * Attenuation factor: 50 |
| − | * | + | * Frequency response: |
** Phono (RIAA): 20 - 30'000 Hz, ± 0,3 dB | ** Phono (RIAA): 20 - 30'000 Hz, ± 0,3 dB | ||
| − | ** | + | ** High level: 10 - 30'000 Hz, + 0 dB, - 1 dB |
| − | * | + | * Signal-to-noise ratio: |
** Phono MM: 70 dB | ** Phono MM: 70 dB | ||
| − | ** | + | ** High level: 85 dB |
| − | * | + | * Tone control |
** Bass: ± 10 dB / 100 Hz | ** Bass: ± 10 dB / 100 Hz | ||
| − | + | Treble: ± 10 dB / 10 kHz | |
| − | * Loudness: | + | * Loudness: Yes |
| − | * High Filter: | + | * High Filter: Yes |
| − | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): Yes |
| − | * Mute: | + | * Mute: Yes |
| − | * Direct/Line-Straight: | + | * Direct/Line-Straight: No |
''Tuner'' | ''Tuner'' | ||
| − | * | + | * Reception: FM, MW |
| − | * | + | * Frequencies: |
| − | ** | + | ** FM: 87.5-108 MHz |
** MW: 516-1605 kHz | ** MW: 516-1605 kHz | ||
| − | * | + | * Input sensitivity: |
| − | ** | + | ** FM: 1.7 µV |
| − | + | MW: 300 µV | |
| − | + | Distortion factor: | |
| − | ** Mono: 0 | + | ** Mono: 0.2 % |
| − | + | Stereo: 0.5 | |
| − | * | + | * Frequency response: 30 - 15'000 Hz, ± 1 dB |
| − | * | + | * Signal-to-noise ratio: |
** Mono: 70 dB | ** Mono: 70 dB | ||
** Stereo: 65 dB | ** Stereo: 65 dB | ||
| − | * | + | * Channel separation: 36 dB |
| − | * | + | * selectivity: > 60 dB |
| − | * | + | * Co-wave selection: 2.0 dB |
| − | * | + | * Spurious wave selection: |
| − | * | + | * Image frequency attenuation: 45 dB |
| − | * | + | * IF attenuation: > 85 dB |
| − | * AM | + | * AM suppression: > 45 dB |
| − | * | + | * Station memory: |
| − | ''' | + | '''Special Features''' |
| − | * | + | * FM muting |
| − | + | * Stereo/Mono switchable | |
| − | * Stereo/Mono | ||
| − | == | + | == Remarks == |
| − | * | + | * Other models in the series: |
* [[Hitachi SR-302]] | * [[Hitachi SR-302]] | ||
* [[Hitachi SR-502]] | * [[Hitachi SR-502]] | ||
| + | * [[Hitachi SR-702]] | ||
* [[Hitachi SR-802]] | * [[Hitachi SR-802]] | ||
| − | == | + | == Pictures == |
| − | * | + | * Image: Hitachi SR-802 |
| − | [[ | + | [[File:Hitachi SR-802-1.jpg|1024px]] |
| − | * | + | * Excerpt from brochure: Hitachi SR-802 in silver |
| − | [[ | + | [[File:Hitachi SR-802-Prospekt-1.jpg|1024px]] |
| − | + | == Reports == | |
| − | == | ||
| Line 109: | Line 108: | ||
| − | [[ | + | [[Category:Receiver]] |
Latest revision as of 11:55, 25 November 2019
Data[edit]
General
- Manufacturer: Hitachi
- Model: SR-802
- Type: Receiver
- Years of manufacture: 1975 - 1977
- Made in: Japan
- Color: Black or Silver
- Remote control:
- Power Consumption:
- Dimensions: 490 x 144 x 400 mm (WxHxD).
- Weight: 12,8 kg
- Original price approx.: 1'050 DM
Connections
- Number of inputs:
- Phono MM: 2.5 mV / 47 kOhm, 200 mV max.
AUX: 150 mV / 20 kOhm, 5 V max. Tape Play: 150 mV / 20 kOhm, 5 V max. FM antenna socket: 75 Ohm coaxial VHF / MW antenna socket: 300 Ohm
- Number of outputs:
- Tape Rec: 150 mV
Tape Rec DIN: 40 mV
- Headphones: 6,3mm jack plug
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (at distortion factor)
8 Ohm: 2 x 50 Watt
- 4 Ohm: 2 x 70 Watt
- Dynamic power:
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: < 0.5 %
- Attenuation factor: 50
- Frequency response:
- Phono (RIAA): 20 - 30'000 Hz, ± 0,3 dB
- High level: 10 - 30'000 Hz, + 0 dB, - 1 dB
- Signal-to-noise ratio:
- Phono MM: 70 dB
- High level: 85 dB
- Tone control
- Bass: ± 10 dB / 100 Hz
Treble: ± 10 dB / 10 kHz
- Loudness: Yes
- High Filter: Yes
- Low Filter (Subsonic): Yes
- Mute: Yes
- Direct/Line-Straight: No
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5-108 MHz
- MW: 516-1605 kHz
- Input sensitivity:
- FM: 1.7 µV
MW: 300 µV Distortion factor:
- Mono: 0.2 %
Stereo: 0.5
- Frequency response: 30 - 15'000 Hz, ± 1 dB
- Signal-to-noise ratio:
- Mono: 70 dB
- Stereo: 65 dB
- Channel separation: 36 dB
- selectivity: > 60 dB
- Co-wave selection: 2.0 dB
- Spurious wave selection:
- Image frequency attenuation: 45 dB
- IF attenuation: > 85 dB
- AM suppression: > 45 dB
- Station memory:
Special Features
- FM muting
- Stereo/Mono switchable
Remarks[edit]
- Other models in the series:
- Hitachi SR-302
- Hitachi SR-502
- Hitachi SR-702
- Hitachi SR-802
Pictures[edit]
- Image: Hitachi SR-802
- Excerpt from brochure: Hitachi SR-802 in silver
