Difference between revisions of "Fisher 701"
(13 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Fisher]] |
− | * | + | * Model: 701 |
− | * | + | * Type: Quadraphonic receiver |
− | * | + | * Years of manufacture: 1970 - 1973 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver, housing either metal or wood |
− | * | + | * Remote control: |
− | * | + | * Power consumption: 240 W max. |
− | * | + | * Dimensions: 430 x 134 x 419 mm (WxHxD) |
− | * | + | * Weight: 15.9 kg |
− | * | + | * New price approx.: 700 US-$, 1971, 3'700 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono (MM): | + | ** Phono (MM): 2.7 mV / 50 kOhm, 50 mV max. |
− | + | Aux 1, 2: 200 mV / 100 kOhm, 3.5 V max. | |
− | ** Tape Play: | + | ** Tape Play: 300 mV / 100 kOhm |
− | ** Tape Play DIN: | + | ** Tape Play DIN: 300 mV / 100 kOhm |
− | * | + | * Number of outputs: |
− | ** Tape Rec: | + | ** Tape Rec: 400 mV / 2.2 kOhm |
** Tape Rec DIN: 4 mV / 10 kOhm | ** Tape Rec DIN: 4 mV / 10 kOhm | ||
− | ** | + | ** Headphones: 5 V, 100 Ohm |
− | ** | + | ** 4 speaker pairs |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (at distortion) |
− | + | 8 Ohm: 4 x 40 W | |
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power |
− | ** 8 Ohm: | + | ** 8 Ohm: 250 W |
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.5 % |
− | * | + | * Attenuation factor: > 10 (8 Ohm) |
− | * | + | * Frequency response: 20 Hz - 26 KHz |
− | * | + | * Signal-to-noise ratio: |
** Phono: 65 dB | ** Phono: 65 dB | ||
− | ** Tape, Aux: | + | ** Tape, Aux: 90 dB |
− | * | + | * Tone control: |
− | ** Bass: ± | + | ** Bass: ± 12 dB at 50 Hz |
− | + | Treble: ± 12 dB at 10 kHz | |
− | * Loudness: + 8 dB | + | * Loudness: + 8 dB at 100 Hz, + 4 dB at 10 kHz |
− | * High Filter: | + | * High Filter: yes, - 3 dB at 5 kHz |
− | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): 10 Hz, 12 dB / octave |
* Mute: | * Mute: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
** MW: 520 - 1605 kHz | ** MW: 520 - 1605 kHz | ||
− | * | + | * Input sensitivities: |
− | ** | + | ** VHF: 1.7 µV |
− | + | MW: 10 µV | |
− | + | * Distortion factor: | |
− | * | + | ** Mono: 0.2 % |
− | ** Mono: 0 | + | Stereo: 0.35 |
− | + | * Frequency response: 20 - 15'000 Hz, - 1 dB | |
− | * | + | * Signal-to-noise ratio: |
− | * | ||
** Mono: 65 dB | ** Mono: 65 dB | ||
** Stereo: 60 dB | ** Stereo: 60 dB | ||
− | * | + | * Channel separation: 65 dB |
− | * | + | * selectivity: 55 dB |
− | * | + | * Co-wave selection: 1.2 dB |
− | * | + | * Spurious selection: 75 dB |
− | * | + | * Image frequency attenuation: 68 dB |
− | * | + | * IF attenuation: 80 dB |
− | * AM | + | * AM suppression: 56 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * 4 channel receiver |
− | * | + | ** Separate sliders for volume front + rear |
+ | * FM muting | ||
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
− | ** [[Fisher 202]] | + | * [[Fisher 201]] |
− | ** [[Fisher 250 TX]] | + | * [[Fisher 202]] |
− | + | * [[Fisher 203]] | |
− | ** [[Fisher 701]] | + | * [[Fisher 205]] |
+ | * [[Fisher 250 TX]] | ||
+ | * [[Fisher 505-T]] | ||
+ | * [[Fisher 701]] | ||
+ | * [[Fisher 701-T]] | ||
+ | * [[Fisher 800-T]] | ||
+ | * [[Fisher 801]] | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Fisher 701 |
− | [[ | + | [[File:Fisher 701-Prospekt-5.jpg]] |
− | == | + | * Extract from brochure: Fisher 701 |
+ | [[File:Fisher 701-Prospekt-3.jpg]] | ||
+ | |||
+ | |||
+ | == Reports == | ||
Line 102: | Line 112: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 10:47, 5 November 2020
Data[edit]
General
- Manufacturer: Fisher
- Model: 701
- Type: Quadraphonic receiver
- Years of manufacture: 1970 - 1973
- Made in: Japan
- Color: Silver, housing either metal or wood
- Remote control:
- Power consumption: 240 W max.
- Dimensions: 430 x 134 x 419 mm (WxHxD)
- Weight: 15.9 kg
- New price approx.: 700 US-$, 1971, 3'700 DM
Connections
- Number of inputs:
- Phono (MM): 2.7 mV / 50 kOhm, 50 mV max.
Aux 1, 2: 200 mV / 100 kOhm, 3.5 V max.
- Tape Play: 300 mV / 100 kOhm
- Tape Play DIN: 300 mV / 100 kOhm
- Number of outputs:
- Tape Rec: 400 mV / 2.2 kOhm
- Tape Rec DIN: 4 mV / 10 kOhm
- Headphones: 5 V, 100 Ohm
- 4 speaker pairs
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 4 x 40 W
- 4 Ohm:
- Dynamic power
- 8 Ohm: 250 W
- 4 Ohm:
- Total harmonic distortion: 0.5 %
- Attenuation factor: > 10 (8 Ohm)
- Frequency response: 20 Hz - 26 KHz
- Signal-to-noise ratio:
- Phono: 65 dB
- Tape, Aux: 90 dB
- Tone control:
- Bass: ± 12 dB at 50 Hz
Treble: ± 12 dB at 10 kHz
- Loudness: + 8 dB at 100 Hz, + 4 dB at 10 kHz
- High Filter: yes, - 3 dB at 5 kHz
- Low Filter (Subsonic): 10 Hz, 12 dB / octave
- Mute:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 520 - 1605 kHz
- Input sensitivities:
- VHF: 1.7 µV
MW: 10 µV
- Distortion factor:
- Mono: 0.2 %
Stereo: 0.35
- Frequency response: 20 - 15'000 Hz, - 1 dB
- Signal-to-noise ratio:
- Mono: 65 dB
- Stereo: 60 dB
- Channel separation: 65 dB
- selectivity: 55 dB
- Co-wave selection: 1.2 dB
- Spurious selection: 75 dB
- Image frequency attenuation: 68 dB
- IF attenuation: 80 dB
- AM suppression: 56 dB
Special Features
- 4 channel receiver
- Separate sliders for volume front + rear
- FM muting
Remarks[edit]
- Other models in the same series:
- Fisher 201
- Fisher 202
- Fisher 203
- Fisher 205
- Fisher 250 TX
- Fisher 505-T
- Fisher 701
- Fisher 701-T
- Fisher 800-T
- Fisher 801
Pictures[edit]
- Extract from brochure: Fisher 701
- Extract from brochure: Fisher 701