Difference between revisions of "Nikko STA-8080"
(8 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Nikko]] |
− | * | + | * Model: STA-8080 |
− | * | + | * Years of manufacture: 1975 - 1977 |
− | * | + | * Made in: Japan |
− | * | + | * Color: silver, wooden case |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 290 W |
− | * | + | * Dimensions: 450 x 140 x 400 mm (WxHxD) |
− | * | + | * Weight: approx. 11 kg |
− | * | + | * Original price approx.: 1'499 DM (1976) |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** | + | ** Phono 1, 2: 2.2 mV |
− | ** | + | ** Aux 1: 160 mV |
− | ** | + | ** Aux 2: 320 mV |
− | ** | + | ** Tape Play 1, 2: 160 mV |
− | ** | + | ** VHF Antenna: (240/60 Ohm) |
− | ** Main-In | + | ** AM antenna: (300 Ohm) |
− | * | + | ** Main-In: 1,4 V |
− | ** | + | * Number of outputs: |
− | ** Pre-Out | + | ** Tape Rec 1, 2: 750 mV |
− | + | ** Pre-Out: 750 mV | |
− | ** | + | FM Quadro: 180 mV |
− | ** 2 | + | ** Headphones: 200 Ohm (6.3mm jack, front) |
+ | ** 2 pairs of speakers: (4-16 Ohm) | ||
− | ''' | + | '''Technical Data''' |
− | '' | + | '''Amplifier''' |
− | * | + | * Continuous power (at distortion) |
− | + | 8 Ohm: 2x 65 W | |
− | + | 4 Ohm: 2x 85 W | |
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
− | ** 4 Ohm: | + | ** 4 Ohm: 2x 100 W |
− | * | + | * Total harmonic distortion: 0.1 % |
− | * | + | * Attenuation factor: > 60 |
− | * | + | * Frequency response: 20 Hz - 30 kHz |
− | * | + | * Signal-to-noise ratio: |
− | ** Phono MM: | + | ** Phono MM: 70 dB |
− | ** | + | ** High level: 80 dB |
− | * | + | * Tone control: |
− | ** Bass: | + | ** Bass: yes, ± 10 dB at 70 Hz |
− | + | treble: yes, ± 10 dB at 10 kHz | |
− | * Loudness: | + | * Loudness: yes, + 10 dB at 70 Hz, + 6 dB at 10 kHz |
− | * High Filter: 7 kHz (12 dB / | + | * High Filter: 7 kHz (12 dB / octave) |
− | * Low Filter (Subsonic): 70 Hz (12 dB / | + | * Low Filter (Subsonic): 70 Hz (12 dB / octave) |
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87 - 108 MHz |
− | + | MW: 525 - 1'605 kHz | |
− | * | + | * Frequency response: 30 - 15'000 Hz, ± 0,5 dB |
− | ** | + | ** VHF: 2.0 µV |
** MW: 150 µV | ** MW: 150 µV | ||
− | * | + | * Distortion factor: |
− | ** | + | ** FM: 0.15 / 0.30 % (mono/stereo) |
− | + | Signal to Noise Ratio: 70/66 dB (Mono/Stereo) | |
− | * | + | * Channel separation: |
− | ** | + | ** FM: > 38 dB |
− | * | + | * Selectivity: |
− | ** | + | ** FM: > 60 dB |
− | + | MW: 25 dB | |
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: |
− | * | + | * IF attenuation: |
− | ** | + | ** FM: 80 dB |
** MW: 45 dB | ** MW: 45 dB | ||
− | + | IF attenuation: | |
− | ** | + | ** FM: 90 dB |
− | ** MW: | + | ** MW: 40 dB |
− | * AM | + | * AM suppression: 60 dB |
− | ''' | + | '''Special Features''' |
* Tape Dubbing | * Tape Dubbing | ||
− | * | + | * VHF muting |
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
* [[Nikko STA-5050]] | * [[Nikko STA-5050]] | ||
* [[Nikko STA-7070]] | * [[Nikko STA-7070]] | ||
Line 96: | Line 97: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Nikko STA-8080 |
− | [[ | + | [[File:1977 Nikko Preise.jpg]] |
− | == | + | == Reports == |
+ | |||
+ | [[File:1977 Nikko Preise.jpg]] | ||
Line 107: | Line 110: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 09:52, 14 April 2020
Data[edit]
General
- Manufacturer: Nikko
- Model: STA-8080
- Years of manufacture: 1975 - 1977
- Made in: Japan
- Color: silver, wooden case
- Remote control: no
- Power consumption: 290 W
- Dimensions: 450 x 140 x 400 mm (WxHxD)
- Weight: approx. 11 kg
- Original price approx.: 1'499 DM (1976)
Connections
- Number of inputs:
- Phono 1, 2: 2.2 mV
- Aux 1: 160 mV
- Aux 2: 320 mV
- Tape Play 1, 2: 160 mV
- VHF Antenna: (240/60 Ohm)
- AM antenna: (300 Ohm)
- Main-In: 1,4 V
- Number of outputs:
- Tape Rec 1, 2: 750 mV
- Pre-Out: 750 mV
FM Quadro: 180 mV
- Headphones: 200 Ohm (6.3mm jack, front)
- 2 pairs of speakers: (4-16 Ohm)
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 2x 65 W 4 Ohm: 2x 85 W
- Dynamic power
- 8 Ohm:
- 4 Ohm: 2x 100 W
- Total harmonic distortion: 0.1 %
- Attenuation factor: > 60
- Frequency response: 20 Hz - 30 kHz
- Signal-to-noise ratio:
- Phono MM: 70 dB
- High level: 80 dB
- Tone control:
- Bass: yes, ± 10 dB at 70 Hz
treble: yes, ± 10 dB at 10 kHz
- Loudness: yes, + 10 dB at 70 Hz, + 6 dB at 10 kHz
- High Filter: 7 kHz (12 dB / octave)
- Low Filter (Subsonic): 70 Hz (12 dB / octave)
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87 - 108 MHz
MW: 525 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 0,5 dB
- VHF: 2.0 µV
- MW: 150 µV
- Distortion factor:
- FM: 0.15 / 0.30 % (mono/stereo)
Signal to Noise Ratio: 70/66 dB (Mono/Stereo)
- Channel separation:
- FM: > 38 dB
- Selectivity:
- FM: > 60 dB
MW: 25 dB
- Equal wave selection:
- FM:
- Spurious wave selection:
- FM:
- IF attenuation:
- FM: 80 dB
- MW: 45 dB
IF attenuation:
- FM: 90 dB
- MW: 40 dB
- AM suppression: 60 dB
Special Features
- Tape Dubbing
- VHF muting
Remarks[edit]
- Other models in the same series:
- Nikko STA-5050
- Nikko STA-7070
- Nikko STA-8080
- Nikko STA-9090
Pictures[edit]
- Extract from brochure: Nikko STA-8080
Reports[edit]