Nikko STA-8080
Data[edit]
General
- Manufacturer: Nikko
- Model: STA-8080
- Years of manufacture: 1975 - 1977
- Made in: Japan
- Color: silver, wooden case
- Remote control: no
- Power consumption: 290 W
- Dimensions: 450 x 140 x 400 mm (WxHxD)
- Weight: approx. 11 kg
- Original price approx.: 1'499 DM (1976)
Connections
- Number of inputs:
- Phono 1, 2: 2.2 mV
- Aux 1: 160 mV
- Aux 2: 320 mV
- Tape Play 1, 2: 160 mV
- VHF Antenna: (240/60 Ohm)
- AM antenna: (300 Ohm)
- Main-In: 1,4 V
- Number of outputs:
- Tape Rec 1, 2: 750 mV
- Pre-Out: 750 mV
FM Quadro: 180 mV
- Headphones: 200 Ohm (6.3mm jack, front)
- 2 pairs of speakers: (4-16 Ohm)
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 2x 65 W 4 Ohm: 2x 85 W
- Dynamic power
- 8 Ohm:
- 4 Ohm: 2x 100 W
- Total harmonic distortion: 0.1 %
- Attenuation factor: > 60
- Frequency response: 20 Hz - 30 kHz
- Signal-to-noise ratio:
- Phono MM: 70 dB
- High level: 80 dB
- Tone control:
- Bass: yes, ± 10 dB at 70 Hz
treble: yes, ± 10 dB at 10 kHz
- Loudness: yes, + 10 dB at 70 Hz, + 6 dB at 10 kHz
- High Filter: 7 kHz (12 dB / octave)
- Low Filter (Subsonic): 70 Hz (12 dB / octave)
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87 - 108 MHz
MW: 525 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 0,5 dB
- VHF: 2.0 µV
- MW: 150 µV
- Distortion factor:
- FM: 0.15 / 0.30 % (mono/stereo)
Signal to Noise Ratio: 70/66 dB (Mono/Stereo)
- Channel separation:
- FM: > 38 dB
- Selectivity:
- FM: > 60 dB
MW: 25 dB
- Equal wave selection:
- FM:
- Spurious wave selection:
- FM:
- IF attenuation:
- FM: 80 dB
- MW: 45 dB
IF attenuation:
- FM: 90 dB
- MW: 40 dB
- AM suppression: 60 dB
Special Features
- Tape Dubbing
- VHF muting
Remarks[edit]
- Other models in the same series:
- Nikko STA-5050
- Nikko STA-7070
- Nikko STA-8080
- Nikko STA-9090
Pictures[edit]
- Extract from brochure: Nikko STA-8080
Reports[edit]