Difference between revisions of "Rotel RA-1210"
(11 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Rotel]] |
− | * | + | * Model: RA-1210 |
− | * | + | * Type: Integrated amplifier |
− | * | + | * Years of manufacture: 1973 - 1976 |
− | * | + | * Made in: Japan |
− | * | + | * Color: silver, wooden cabinet |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: |
− | * | + | * Dimensions (WxHxD): 420 x 140 x 304 mm. |
− | * | + | * Weight: 13.7 kg |
− | * | + | * Original price approx.: 978 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM 1: 1 mV, 100 kOhm | + | ** Phono MM 1: 1 mV, 100 kOhm. |
− | ** Phono MM 2: | + | ** Phono MM 2: switchable 1 mV, 2 mV, 4 mV, switchable 10 kOhm, 50 kOhm. 100 kOhm |
− | ** Aux 1, 2: | + | ** Aux 1, 2: 180 mV, 50 kOhm, max. 15 V |
− | ** Tape Play 1, 2: | + | ** Tape Play 1, 2: 180 mV, 50 kOhm, max. 15 V |
− | ** Main In: 1 | + | ** Main In: 1.5 V, 50 kOhm |
− | * | + | * Number of outputs: |
− | ** Tape Rec 1, 2: 350 mV, 3 | + | ** Tape Rec 1, 2: 350 mV, 3.3 kOhm. |
** Tape Rec DIN: 120 mV, 90 kOhm | ** Tape Rec DIN: 120 mV, 90 kOhm | ||
** Pre Out: | ** Pre Out: | ||
− | ** | + | ** Headphones: |
− | ** 2 | + | ** 2 pairs of speakers |
− | ''' | + | '''Technical Data''' |
− | + | * Continuous power (at distortion factor) | |
− | |||
− | * | ||
** 8 Ohm: 2x 60 Watt (20 Hz - 20'000 Hz) | ** 8 Ohm: 2x 60 Watt (20 Hz - 20'000 Hz) | ||
** 4 Ohm: 2x 80 Watt (1 kHz) | ** 4 Ohm: 2x 80 Watt (1 kHz) | ||
− | * | + | * Dynamic power |
− | ** 8 Ohm: | + | ** 8 Ohm: 2x 80 Watt |
− | ** 4 Ohm: | + | ** 4 Ohm: 2x 110 Watt |
− | * | + | * Frequency response: 3 Hz - 50 kHz, - 3 dB |
− | * | + | * Distortion factor: < 0.1 % |
− | * | + | * Attenuation factor: 35 at 8 Ohm |
− | * | + | * Signal-to-noise ratio: |
− | ** Phono MM: | + | ** Phono MM: 70 dB |
− | ** | + | ** High level: 80 dB |
− | * | + | * Tone control |
− | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 100 Hz |
− | ** | + | *** Operating frequencies: 200 Hz, 400 Hz |
− | * Loudness: + 10 dB | + | Treble: ± 10 dB at 10 kHz |
− | * High Filter: - 12 dB / | + | *** Operating frequencies: 2 kHz, 4 kHz |
− | * Low Filter (Subsonic): - 12 dB / | + | * Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz |
− | * Muting: 0 dB, - | + | * High Filter: - 12 dB / octave at 8 kHz |
− | + | * Low Filter (Subsonic): - 12 dB / octave at 30 Hz | |
− | + | * Muting: 0 dB, - 20 dB | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | ''' | + | '''Special Features''' |
* Tape Dubbing | * Tape Dubbing | ||
− | |||
− | == | + | == Remarks == |
− | * | + | * Other receivers in the same series: |
** [[Rotel RX-154 A]] | ** [[Rotel RX-154 A]] | ||
** [[Rotel RX-400 A]] | ** [[Rotel RX-400 A]] | ||
Line 88: | Line 67: | ||
− | * | + | * Amplifiers of the same series: |
** [[Rotel RA-1210]] | ** [[Rotel RA-1210]] | ||
− | * | + | * Tuners of the same series: |
** [[Rotel RT-1220]] | ** [[Rotel RT-1220]] | ||
− | * | + | * Headphones of the same series: |
− | ** [[Rotel RH | + | ** [[Rotel RH 430]] |
− | ** [[Rotel RH | + | ** [[Rotel RH 630]] |
− | ** [[Rotel RH | + | ** [[Rotel RH 700]] |
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Rotel RA-1210 |
− | [[ | + | [[File:Rotel RA-1210-Prospekt-1.jpg]] |
− | == | + | == Reports == |
+ | * Report at "Good Old Hifi": [[http://www.good-old-hifi.de/rotel_ra-1210/]] | ||
== Links == | == Links == | ||
− | [[ | + | |
+ | [[Category:Integrated amplifier]] |
Latest revision as of 23:40, 7 April 2019
Data[edit]
General
- Manufacturer: Rotel
- Model: RA-1210
- Type: Integrated amplifier
- Years of manufacture: 1973 - 1976
- Made in: Japan
- Color: silver, wooden cabinet
- Remote control: no
- Power consumption:
- Dimensions (WxHxD): 420 x 140 x 304 mm.
- Weight: 13.7 kg
- Original price approx.: 978 DM
Connections
- Number of inputs:
- Phono MM 1: 1 mV, 100 kOhm.
- Phono MM 2: switchable 1 mV, 2 mV, 4 mV, switchable 10 kOhm, 50 kOhm. 100 kOhm
- Aux 1, 2: 180 mV, 50 kOhm, max. 15 V
- Tape Play 1, 2: 180 mV, 50 kOhm, max. 15 V
- Main In: 1.5 V, 50 kOhm
- Number of outputs:
- Tape Rec 1, 2: 350 mV, 3.3 kOhm.
- Tape Rec DIN: 120 mV, 90 kOhm
- Pre Out:
- Headphones:
- 2 pairs of speakers
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 60 Watt (20 Hz - 20'000 Hz)
- 4 Ohm: 2x 80 Watt (1 kHz)
- Dynamic power
- 8 Ohm: 2x 80 Watt
- 4 Ohm: 2x 110 Watt
- Frequency response: 3 Hz - 50 kHz, - 3 dB
- Distortion factor: < 0.1 %
- Attenuation factor: 35 at 8 Ohm
- Signal-to-noise ratio:
- Phono MM: 70 dB
- High level: 80 dB
- Tone control
- Bass: ± 10 dB at 100 Hz
- Operating frequencies: 200 Hz, 400 Hz
- Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
- Operating frequencies: 2 kHz, 4 kHz
- Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
- High Filter: - 12 dB / octave at 8 kHz
- Low Filter (Subsonic): - 12 dB / octave at 30 Hz
- Muting: 0 dB, - 20 dB
Special Features
- Tape Dubbing
Remarks[edit]
- Other receivers in the same series:
- Amplifiers of the same series:
- Tuners of the same series:
- Headphones of the same series:
Pictures[edit]
- Extract from brochure: Rotel RA-1210
Reports[edit]
- Report at "Good Old Hifi": [[1]]