Difference between revisions of "Sanyo JCX-2100"
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Sanyo]] |
− | * | + | * Model: JCX-2100, variant JCX-2100 L with long wave |
− | * | + | * Years of manufacture: 1978 - 1980 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Front silver, housing walnut decor |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 100 W |
− | * | + | * Dimensions: 420 x 140 x 300 mm (WxHxD) |
− | * | + | * Weight: 7.5 kg |
− | * | + | * Original price approx.: 698 DM (version with long wave) |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM: 2 | + | ** Phono MM: 2.5 mV / 50 kOhm, max. 150 mV. |
** AUX: 150 mV / 50 kOhm | ** AUX: 150 mV / 50 kOhm | ||
** Tape Play 1: 150 mV / 50 kOhm | ** Tape Play 1: 150 mV / 50 kOhm | ||
** Tape Play 1 DIN: 150 mV / 50 kOhm | ** Tape Play 1 DIN: 150 mV / 50 kOhm | ||
− | ** Tape Play 2 DIN: 150 mV / 50 kOhm ( | + | ** Tape Play 2 DIN: 150 mV / 50 kOhm (front input) |
− | ** | + | ** Antenna FM (75/300 Ohm), AM |
− | * | + | * Number of outputs: |
** Tape Rec 1, 2: 150 mV | ** Tape Rec 1, 2: 150 mV | ||
− | ** Tape Rec 1 DIN: 0 | + | ** Tape Rec 1 DIN: 0.55 mV |
− | ** Tape Rec 2 DIN: 0 | + | ** Tape Rec 2 DIN: 0.55 mV (front input) |
− | ** | + | ** Headphones (6.3 mm jack, front) |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power |
− | + | 8 Ohm: 2x 17 W | |
− | + | 4 Ohm: 2x 21 W | |
− | * | + | * dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.4 % |
− | * | + | * Attenuation factor: |
− | * | + | * Frequency response: 10 - 40,000 Hz |
− | * | + | * Signal to noise ratio: |
** Phono MM: 70 dB | ** Phono MM: 70 dB | ||
** AUX, Tape: 90 dB | ** AUX, Tape: 90 dB | ||
− | * | + | * Stereo channel separation: |
− | * | + | * Tone control: |
** Bass: ± 10 dB (100 Hz) | ** Bass: ± 10 dB (100 Hz) | ||
− | + | Treble: ± 10 dB (10 kHz) | |
− | * Loudness: + 8 dB | + | * Loudness: + 8 dB at 100 Hz, + 4 dB at 10 kHz |
* High Filter: | * High Filter: | ||
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
Line 57: | Line 57: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
** MW: 525 - 1605 kHz | ** MW: 525 - 1605 kHz | ||
− | * | + | * Frequency response: 30 - 15,000 Hz, ± 3 dB |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 2.0 µV (IHF) |
− | + | MW: 300 µV | |
− | + | Distortion factor: | |
− | ** | + | ** FM: 0.3% (mono), 0.4% (stereo). |
− | + | Signal-to-noise ratio: | |
− | ** | + | ** FM: 70 dB (mono), 67 dB (stereo) |
− | + | MW: 50 dB | |
− | * | + | * Channel separation: |
− | ** | + | ** FM: 40 dB (at 1 kHz). |
− | * | + | * Selectivity: |
− | ** | + | ** FM: 55 dB |
** MW: 33 dB | ** MW: 33 dB | ||
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: 1.3 dB |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: 70 dB |
− | * | + | * Image frequency attenuation: |
− | ** | + | ** FM: 50 dB |
** MW: 48 dB | ** MW: 48 dB | ||
− | + | IF attenuation: | |
− | ** | + | ** FM: 100 dB |
** MW: 54 dB | ** MW: 54 dB | ||
− | * AM | + | * AM suppression: 55 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * FM muting |
− | * Tape | + | * Tape dubbing |
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
** [[Sanyo JCX-2100]] | ** [[Sanyo JCX-2100]] | ||
** [[Sanyo JCX-2200]] | ** [[Sanyo JCX-2200]] | ||
Line 104: | Line 104: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Sanyo JCX-2100 L |
− | [[ | + | [[File:Sanyo JCX-2100-Prospekt-1.jpg]] |
− | == | + | == Reports == |
== Links == | == Links == | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 08:03, 19 October 2020
Data[edit]
General
- Manufacturer: Sanyo
- Model: JCX-2100, variant JCX-2100 L with long wave
- Years of manufacture: 1978 - 1980
- Made in: Japan
- Color: Front silver, housing walnut decor
- Remote control: no
- Power consumption: 100 W
- Dimensions: 420 x 140 x 300 mm (WxHxD)
- Weight: 7.5 kg
- Original price approx.: 698 DM (version with long wave)
Connections
- Number of inputs:
- Phono MM: 2.5 mV / 50 kOhm, max. 150 mV.
- AUX: 150 mV / 50 kOhm
- Tape Play 1: 150 mV / 50 kOhm
- Tape Play 1 DIN: 150 mV / 50 kOhm
- Tape Play 2 DIN: 150 mV / 50 kOhm (front input)
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- Tape Rec 1, 2: 150 mV
- Tape Rec 1 DIN: 0.55 mV
- Tape Rec 2 DIN: 0.55 mV (front input)
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
8 Ohm: 2x 17 W 4 Ohm: 2x 21 W
- dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.4 %
- Attenuation factor:
- Frequency response: 10 - 40,000 Hz
- Signal to noise ratio:
- Phono MM: 70 dB
- AUX, Tape: 90 dB
- Stereo channel separation:
- Tone control:
- Bass: ± 10 dB (100 Hz)
Treble: ± 10 dB (10 kHz)
- Loudness: + 8 dB at 100 Hz, + 4 dB at 10 kHz
- High Filter:
- Low Filter (Subsonic):
- Muting: 0 dB, - 20 dB
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 525 - 1605 kHz
- Frequency response: 30 - 15,000 Hz, ± 3 dB
- Input sensitivity:
- FM: 2.0 µV (IHF)
MW: 300 µV Distortion factor:
- FM: 0.3% (mono), 0.4% (stereo).
Signal-to-noise ratio:
- FM: 70 dB (mono), 67 dB (stereo)
MW: 50 dB
- Channel separation:
- FM: 40 dB (at 1 kHz).
- Selectivity:
- FM: 55 dB
- MW: 33 dB
- Equal wave selection:
- FM: 1.3 dB
- Spurious wave selection:
- FM: 70 dB
- Image frequency attenuation:
- FM: 50 dB
- MW: 48 dB
IF attenuation:
- FM: 100 dB
- MW: 54 dB
- AM suppression: 55 dB
Special Features
- FM muting
- Tape dubbing
Remarks[edit]
- Other models in the same series:
Pictures[edit]
- Extract from brochure: Sanyo JCX-2100 L