Sanyo JCX-2200
Data[edit]
General
- Manufacturer: Sanyo
- Model: JCX-2200, variant JCX-2200 L with long wave
- Years of manufacture: 1978 - 1980
- Made in: Japan
- Color: Front silver, housing walnut decor
- Remote control: no
- Power consumption: 180 W
- Dimensions: 440 x 145 x 330 mm (WxHxD)
- Weight: 9 kg
- Original price approx.: 778 DM
Connections
- Number of inputs:
- Phono MM: 2.5 mV / 50 kOhm, max. 150 mV
- AUX: 150 mV / 50 kOhm
- Tape Play 1: 150 mV / 50 kOhm
- Tape Play 1 DIN: 150 mV / 50 kOhm
- Tape Play 2 DIN: 150 mV / 50 kOhm (front input)
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- Tape Rec 1, 2: 150 mV
- Tape Rec 1 DIN: 0.55 mV
- Tape Rec 2 DIN: 0.55 mV (front input)
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
8 Ohm: 2x 30 W 4 Ohm: 2x 35 W
- dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.4 %
- Attenuation factor:
- Frequency response: 10 - 40,000 Hz
- Signal to noise ratio:
- Phono MM: 70 dB
- AUX, Tape: 90 dB
- Stereo channel separation:
- Tone control:
- Bass: ± 10 dB (100 Hz)
Treble: ± 10 dB (10 kHz)
- Loudness: + 8 dB at 100 Hz, + 4 dB at 10 kHz
- High Filter:
- Low Filter (Subsonic):
- Muting: 0 dB, - 20 dB
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 525 - 1605 kHz
- Frequency response: 30 - 15,000 Hz, ± 3 dB
- Input sensitivity:
- FM: 1.9 µV (IHF)
MW: 300 µV Distortion factor:
- FM: 0.3% (mono), 0.4% (stereo).
- Signal-to-noise ratio:
- FM: 70 dB (mono), 67 dB (stereo)
MW: 50 dB
- Channel separation:
- FM: 40 dB (at 1 kHz).
- Selectivity:
- FM: 55 dB
- MW: 33 dB
- Equal wave selection:
- FM: 1.3 dB
- Spurious wave selection:
- FM: 70 dB
- Image frequency attenuation:
- FM: 50 dB
- MW: 48 dB
IF attenuation:
- FM: 100 dB
- MW: 54 dB
- AM suppression: 55 dB
Special Features
- FM muting
- Tape dubbing
Remarks[edit]
- Other models in the same series:
Pictures[edit]
- Extract from brochure: Sanyo JCX-2200 L
