Difference between revisions of "Dual CS 5000"
| (10 intermediate revisions by 7 users not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Dual]] |
| − | * | + | * Model: CS 5000 |
| − | * | + | * Years of manufacture: 1985 - 1992 |
| − | * | + | * Made in: Germany |
| − | * | + | * Color: Black and walnut |
| − | * | + | * Power consumption: 9 W |
| − | * | + | * Dimensions: 442 x 130 x 381 mm |
| − | * | + | * Weight: |
| − | * | + | * Original price approx.: 800 DM (400 €) |
| − | ''' | + | '''Connections''' |
| − | * | + | * Outputs: 1 |
| − | ''' | + | '''Technical data''' |
| − | * | + | * Drive: Belt, quartz controlled (EDS 5000) |
| − | * | + | * Speed: 33 1/3, 45 & 78 rpm |
| − | * | + | * Synchronous speed fluctuations: ±0.015 % WRMS, ±0.025 % DIN |
| − | * | + | * Rumble noise ratio: unweighted: -56 dB, weighted: -80 dB |
| − | * | + | * Frequency response: 10 - 28,000 Hz |
| − | * | + | * Transfer factor: 6mV/5.6cm[-1]/1kHz |
| + | * Compliance (static): 35 µm/mN | ||
| + | * Depth scanning capability (300 Hz): 90 µm | ||
| + | * Height scanning capability (10 kHz): 0.3 | ||
| + | * tonearm: aluminium tube tonearm, cardan, OPS | ||
| + | * effekt. tonearm length: 221 mm | ||
| + | * crank angle: 22°25' | ||
| + | * overhang: 18 mm | ||
| + | * eff. tonearm mass: 10,3 g | ||
| + | * tangent. tracking error angle: 0,15°/cm radius | ||
| + | * pickup: magnet, Ortofon OMB 20 E | ||
| + | * diamond stylus: biradial, DN 20 NE, 18 x 8 µm | ||
| + | * recommended tracking force: 12,5 mN | ||
| + | * cartridge weight: 5 g | ||
| + | * platter: non-magnetic, removable, 304 mm | ||
| + | * operating mode: semi-automatic | ||
| − | ''' | + | '''Special Features''' |
| + | * Headshell with VTA correction | ||
| − | == | + | == Remarks == |
| − | + | * Other models in the same series: | |
| + | * [[Dual CS 435]] | ||
| + | * [[Dual CS 450]] | ||
| + | * [[Dual CS 455]] | ||
| + | * [[Dual CS 503-2]] | ||
| + | * [[Dual CS 505-4]] | ||
| + | * [[Dual CS 750]] | ||
| + | * [[Dual CS 5000]] | ||
| + | * [[Dual Golden One]] | ||
| − | |||
| − | == | + | == Pictures == |
| + | * Image: Dual CS-5000 | ||
| + | [[Image: Dual_CS_5000_007c.JPG]] | ||
| + | |||
| + | |||
| + | == Reviews == | ||
| + | * The turntable CS 5000 is a really successful device. The slightly older units of this series have a flaw in my opinion. The turntable axle is not grounded. Even relatively small overvoltages, like a burned out light bulb near the turntable, can lead to irreparable damage of the processor (according to my experiences a replacement for the processor is not to be found). Subsequent grounding of the platter axle is relatively simple and immediately apparent when the platter is removed. In my case, I had no choice but to look for a usable defective unit. | ||
| + | * Dr. W. Kaczmarczyk | ||
| + | |||
| + | * Test report in Hifi-Vision 03/1986 / Test report in Audio 04/1986 | ||
| + | |||
== Links == | == Links == | ||
| − | [[ | + | |
| + | [[Category:Turntables]] | ||
Latest revision as of 03:02, 14 May 2021
Data[edit]
General
- Manufacturer: Dual
- Model: CS 5000
- Years of manufacture: 1985 - 1992
- Made in: Germany
- Color: Black and walnut
- Power consumption: 9 W
- Dimensions: 442 x 130 x 381 mm
- Weight:
- Original price approx.: 800 DM (400 €)
Connections
- Outputs: 1
Technical data
- Drive: Belt, quartz controlled (EDS 5000)
- Speed: 33 1/3, 45 & 78 rpm
- Synchronous speed fluctuations: ±0.015 % WRMS, ±0.025 % DIN
- Rumble noise ratio: unweighted: -56 dB, weighted: -80 dB
- Frequency response: 10 - 28,000 Hz
- Transfer factor: 6mV/5.6cm[-1]/1kHz
- Compliance (static): 35 µm/mN
- Depth scanning capability (300 Hz): 90 µm
- Height scanning capability (10 kHz): 0.3
- tonearm: aluminium tube tonearm, cardan, OPS
- effekt. tonearm length: 221 mm
- crank angle: 22°25'
- overhang: 18 mm
- eff. tonearm mass: 10,3 g
- tangent. tracking error angle: 0,15°/cm radius
- pickup: magnet, Ortofon OMB 20 E
- diamond stylus: biradial, DN 20 NE, 18 x 8 µm
- recommended tracking force: 12,5 mN
- cartridge weight: 5 g
- platter: non-magnetic, removable, 304 mm
- operating mode: semi-automatic
Special Features
- Headshell with VTA correction
Remarks[edit]
- Other models in the same series:
- Dual CS 435
- Dual CS 450
- Dual CS 455
- Dual CS 503-2
- Dual CS 505-4
- Dual CS 750
- Dual CS 5000
- Dual Golden One
Pictures[edit]
- Image: Dual CS-5000
Reviews[edit]
- The turntable CS 5000 is a really successful device. The slightly older units of this series have a flaw in my opinion. The turntable axle is not grounded. Even relatively small overvoltages, like a burned out light bulb near the turntable, can lead to irreparable damage of the processor (according to my experiences a replacement for the processor is not to be found). Subsequent grounding of the platter axle is relatively simple and immediately apparent when the platter is removed. In my case, I had no choice but to look for a usable defective unit.
- Dr. W. Kaczmarczyk
- Test report in Hifi-Vision 03/1986 / Test report in Audio 04/1986