Difference between revisions of "Restek Extract"
Black CAT II (talk | contribs) |
(Kategorie "Endstufen" ergänzt und Daten in Vorlage "Endstufen" eingearbeitet) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | {{ | + | __NOTOC__ |
| − | http://www. | + | == Data == |
| + | {{navigation}} | ||
| + | '''General''' | ||
| + | * Manufacturer: [[Restek]] | ||
| + | * Model: Extract | ||
| + | * Years of manufacture: | ||
| + | * Made in: | ||
| + | * Color: | ||
| + | ** Housing: black | ||
| + | ** Front: acrylic glass high gloss polished or aluminum black, champagne or silver matt brushed or brass chrome plated. | ||
| + | * Type: Mono power amplifier | ||
| + | * Remote control: | ||
| + | * Power consumption: | ||
| + | * Dimensions: 240 x 155 x 395 mm (W x H x D). | ||
| + | * Weight: 14 kg | ||
| + | * Original price approx: | ||
| + | |||
| + | |||
| + | '''Connections''' | ||
| + | * Number of inputs: | ||
| + | ** Input sensitivity: 2 V rms | ||
| + | ** Input impedance: 47 kOhm unbalanced, 10 kOhm balanced. | ||
| + | * Number of outputs: | ||
| + | ** list outputs here | ||
| + | |||
| + | |||
| + | '''Technical data'''(according to manufacturer) | ||
| + | * Continuous power (sine) | ||
| + | 8 Ohm: 180 Watt | ||
| + | 4 Ohm: 300 Watt | ||
| + | Dynamic power (music) | ||
| + | 8 Ohm: 200 Watt | ||
| + | ** 4 Ohm: 350 Watt | ||
| + | * Rise time: < 2 usec | ||
| + | * Slew Rate: >40 V/usec | ||
| + | * Total harmonic distortion: < 0,007% | ||
| + | * Dämpfungsfaktor: >250 ( 8 Ohm 1kHz ) | ||
| + | * Frequency response: 5 Hz - 150 kHz at -3dB | ||
| + | * Signal to noise ratio: > 110 dbA | ||
| + | * Stereo Channel Separation: - - - | ||
| + | |||
| + | |||
| + | '''Special Features''' | ||
| + | * The on/off switch is located on the rear panel. | ||
| + | * The front panel is dominated by a large VU meter with switchable backlighting | ||
| + | * The scaling has been optimized for 8-ohm speakers | ||
| + | * Four LED indicators show the operating status of the power amplifier. | ||
| + | |||
| + | |||
| + | == Remarks == | ||
| + | The EXTRACT is a mono power amplifier from the Fuldbrück-based hi-fi manufacturer RESTEK. The EXTRACT is parallel balanced and has a cascade circuit in the input stage which drives eight output transistors via the driver stage. It can drive loudspeakers up to a minimum impedance of 2 ohms and deliver more than 400 watts. | ||
| + | |||
| + | |||
| + | '''Other models in the same series:''' | ||
| + | |||
| + | == Pictures == | ||
| + | http://www.hifi-wiki.de/images/3/3f/Restek_extract.jpg | ||
| + | |||
| + | == Reports == | ||
| + | |||
| + | == Links == | ||
| + | Link to the manufacturer: http://www.restek.de/extract-endstufe/ | ||
| + | |||
| + | [[Category:Power Amplifiers]]</0,007%></2> | ||
Latest revision as of 05:31, 16 March 2015
Data[edit]
General
- Manufacturer: Restek
- Model: Extract
- Years of manufacture:
- Made in:
- Color:
- Housing: black
- Front: acrylic glass high gloss polished or aluminum black, champagne or silver matt brushed or brass chrome plated.
- Type: Mono power amplifier
- Remote control:
- Power consumption:
- Dimensions: 240 x 155 x 395 mm (W x H x D).
- Weight: 14 kg
- Original price approx:
Connections
- Number of inputs:
- Input sensitivity: 2 V rms
- Input impedance: 47 kOhm unbalanced, 10 kOhm balanced.
- Number of outputs:
- list outputs here
Technical data(according to manufacturer)
- Continuous power (sine)
8 Ohm: 180 Watt 4 Ohm: 300 Watt Dynamic power (music) 8 Ohm: 200 Watt
- 4 Ohm: 350 Watt
- Rise time: < 2 usec
- Slew Rate: >40 V/usec
- Total harmonic distortion: < 0,007%
- Dämpfungsfaktor: >250 ( 8 Ohm 1kHz )
- Frequency response: 5 Hz - 150 kHz at -3dB
- Signal to noise ratio: > 110 dbA
- Stereo Channel Separation: - - -
Special Features
- The on/off switch is located on the rear panel.
- The front panel is dominated by a large VU meter with switchable backlighting
- The scaling has been optimized for 8-ohm speakers
- Four LED indicators show the operating status of the power amplifier.
Remarks[edit]
The EXTRACT is a mono power amplifier from the Fuldbrück-based hi-fi manufacturer RESTEK. The EXTRACT is parallel balanced and has a cascade circuit in the input stage which drives eight output transistors via the driver stage. It can drive loudspeakers up to a minimum impedance of 2 ohms and deliver more than 400 watts.
Other models in the same series:
Pictures[edit]
Reports[edit]
Links[edit]
Link to the manufacturer: http://www.restek.de/extract-endstufe/</0,007%></2>