Difference between revisions of "Dual CS 5000"
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Dual]] |
− | * | + | * Model: CS 5000 |
− | * | + | * Years of manufacture: 1985 - 1992 |
− | * | + | * Made in: Germany |
− | * | + | * Color: Black and walnut |
− | * | + | * Power consumption: 9 W |
− | * | + | * Dimensions: 442 x 130 x 381 mm |
− | * | + | * Weight: |
− | * | + | * Original price approx.: 800 DM (400 €) |
− | ''' | + | '''Connections''' |
− | * | + | * Outputs: 1 |
− | ''' | + | '''Technical data''' |
− | * | + | * Drive: Belt, quartz controlled (EDS 5000) |
− | * | + | * Speed: 33 1/3, 45 & 78 rpm |
− | * | + | * Synchronous speed fluctuations: ±0.015 % WRMS, ±0.025 % DIN |
− | * | + | * Rumble noise ratio: unweighted: -56 dB, weighted: -80 dB |
− | * | + | * Frequency response: 10 - 28,000 Hz |
− | * | + | * Transfer factor: 6mV/5.6cm[-1]/1kHz |
− | * Compliance ( | + | * Compliance (static): 35 µm/mN |
− | * | + | * Depth scanning capability (300 Hz): 90 µm |
− | * | + | * Height scanning capability (10 kHz): 0.3 |
− | * | + | * tonearm: aluminium tube tonearm, cardan, OPS |
− | * effekt. | + | * effekt. tonearm length: 221 mm |
− | * | + | * crank angle: 22°25' |
− | * | + | * overhang: 18 mm |
− | * eff. | + | * eff. tonearm mass: 10,3 g |
− | * tangent. | + | * tangent. tracking error angle: 0,15°/cm radius |
− | * | + | * pickup: magnet, Ortofon OMB 20 E |
− | * | + | * diamond stylus: biradial, DN 20 NE, 18 x 8 µm |
− | * | + | * recommended tracking force: 12,5 mN |
− | * | + | * cartridge weight: 5 g |
− | * | + | * platter: non-magnetic, removable, 304 mm |
− | * | + | * operating mode: semi-automatic |
− | ''' | + | '''Special Features''' |
− | * Headshell | + | * Headshell with VTA correction |
− | == | + | |
− | * | + | == Remarks == |
+ | * Other models in the same series: | ||
* [[Dual CS 435]] | * [[Dual CS 435]] | ||
* [[Dual CS 450]] | * [[Dual CS 450]] | ||
Line 57: | Line 58: | ||
− | == | + | == Pictures == |
− | * | + | * Image: Dual CS-5000 |
− | [[ | + | [[Image: Dual_CS_5000_007c.JPG]] |
− | == | + | == Reviews == |
− | * | + | * The turntable CS 5000 is a really successful device. The slightly older units of this series have a flaw in my opinion. The turntable axle is not grounded. Even relatively small overvoltages, like a burned out light bulb near the turntable, can lead to irreparable damage of the processor (according to my experiences a replacement for the processor is not to be found). Subsequent grounding of the platter axle is relatively simple and immediately apparent when the platter is removed. In my case, I had no choice but to look for a usable defective unit. |
* Dr. W. Kaczmarczyk | * Dr. W. Kaczmarczyk | ||
− | * | + | * Test report in Hifi-Vision 03/1986 / Test report in Audio 04/1986 |
== Links == | == Links == | ||
− | [[ | + | |
+ | [[Category:Turntables]] |
Latest revision as of 03:02, 14 May 2021
Data[edit]
General
- Manufacturer: Dual
- Model: CS 5000
- Years of manufacture: 1985 - 1992
- Made in: Germany
- Color: Black and walnut
- Power consumption: 9 W
- Dimensions: 442 x 130 x 381 mm
- Weight:
- Original price approx.: 800 DM (400 €)
Connections
- Outputs: 1
Technical data
- Drive: Belt, quartz controlled (EDS 5000)
- Speed: 33 1/3, 45 & 78 rpm
- Synchronous speed fluctuations: ±0.015 % WRMS, ±0.025 % DIN
- Rumble noise ratio: unweighted: -56 dB, weighted: -80 dB
- Frequency response: 10 - 28,000 Hz
- Transfer factor: 6mV/5.6cm[-1]/1kHz
- Compliance (static): 35 µm/mN
- Depth scanning capability (300 Hz): 90 µm
- Height scanning capability (10 kHz): 0.3
- tonearm: aluminium tube tonearm, cardan, OPS
- effekt. tonearm length: 221 mm
- crank angle: 22°25'
- overhang: 18 mm
- eff. tonearm mass: 10,3 g
- tangent. tracking error angle: 0,15°/cm radius
- pickup: magnet, Ortofon OMB 20 E
- diamond stylus: biradial, DN 20 NE, 18 x 8 µm
- recommended tracking force: 12,5 mN
- cartridge weight: 5 g
- platter: non-magnetic, removable, 304 mm
- operating mode: semi-automatic
Special Features
- Headshell with VTA correction
Remarks[edit]
- Other models in the same series:
- Dual CS 435
- Dual CS 450
- Dual CS 455
- Dual CS 503-2
- Dual CS 505-4
- Dual CS 750
- Dual CS 5000
- Dual Golden One
Pictures[edit]
- Image: Dual CS-5000
Reviews[edit]
- The turntable CS 5000 is a really successful device. The slightly older units of this series have a flaw in my opinion. The turntable axle is not grounded. Even relatively small overvoltages, like a burned out light bulb near the turntable, can lead to irreparable damage of the processor (according to my experiences a replacement for the processor is not to be found). Subsequent grounding of the platter axle is relatively simple and immediately apparent when the platter is removed. In my case, I had no choice but to look for a usable defective unit.
- Dr. W. Kaczmarczyk
- Test report in Hifi-Vision 03/1986 / Test report in Audio 04/1986