Difference between revisions of "Pioneer A-509 R"

(Bemerkungen)
 
(13 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Daten ==
+
== Data ==
{{Navigation}}
+
{{navigation}}
'''Allgemein'''
+
'''General'''
* Hersteller: Pioneer Corporation
+
* Manufacturer: [[Pioneer]]
* Modell: A-509R
+
* Model: A-509 R
* Baujahre: 2000 - heute, seit 2006 nicht mehr in Deutschland erhältlich
+
* Type: Integrated amplifier
* Hergestellt in: Japan
+
* Years of manufacture: 2000 - 2006
* Typ: Vollverstärker
+
* Made in: Japan
* Fernbedienung: ja
+
* Color: Black
* Leistungsaufnahme: 160W
+
* Remote control: yes
* Abmessungen: 42cm x 33,5cm x 12,8cm
+
* Power consumption: 160 W
* Gewicht: 6,9kg
+
* Dimensions: 420 x 335 x 128 mm
* Farbe: schwarz
+
* Weight: 6.9 kg
* Neupreis ca.: 250-320 Euro
+
* Original price approx.: 599 DM
  
  
'''Anschlüsse'''
+
'''Connections'''
* Anzahl der Eingänge: 6
+
* Number of inputs: 6
 
** TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, PHONO, TAPE 2 MONITOR
 
** TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, PHONO, TAPE 2 MONITOR
* Anzahl der Ausgänge: 2
+
* Number of outputs: 2
 
** TAPE 1/CD-R/MD, TAPE 2 MONITOR  
 
** TAPE 1/CD-R/MD, TAPE 2 MONITOR  
  
  
'''Technische Daten'''
+
'''Specifications'''
* Dauerleistung (bei Klirrfaktor)
+
* Continuous power (at distortion)
** 8 Ohm: 2x45W (0,06%)
+
** 8 Ohm: 2 x 45W / 0,05 %
** 8 Ohm: 2x60W (1,0%, DIN)
+
4 Ohm: 2 x 65W
** 4 Ohm: 2x65W (0,09%)
+
* Dynamic power
** 4 Ohm: 2x90W (1,0%, DIN)
 
* Dynamikleistung
 
 
** 8 Ohm:
 
** 8 Ohm:
 
** 4 Ohm:
 
** 4 Ohm:
* Gesamtklirrfaktor: 0,05% (20Hz - 20 kHz, 20W, 8 Ohm)
+
* Total harmonic distortion: 0.05% (20Hz - 20 kHz, 20W, 8 Ohm).
* Dämpfungsfaktor:
+
* Attenuation factor:
* Eingang (Empfindlichkeit/Impedanz)
+
* Input (Sensitivity/Impedance).
** PHONO (MM): 2,8mV/50kOhm; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 200mV/50kOhm
+
** PHONO (MM): 2.8mV/50kOhm; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 200mV/50kOhm
* Ausgang (Pegel/Impedanz)
+
* Output (level/impedance)
 
** TAPE 1/CD-R/MD, TAPE 2 MONITOR: 200mV, 1kOhm
 
** TAPE 1/CD-R/MD, TAPE 2 MONITOR: 200mV, 1kOhm
* Frequenzgang: PHONO (MM): 20Hz - 20kHz, +/- 0,5 dB; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 5Hz - 100kHz, +0/-3dB, DIRECT-Modus
+
* Frequency response: PHONO (MM): 20Hz - 20kHz, +/- 0.5 dB; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 5Hz - 100kHz, +0/-3dB, DIRECT mode
* Klangregelung: analog
+
* Tone control: analog
** Bass: +/- 8dB (100Hz)
+
Bass: +/- 8dB (100Hz)
** Höhen: +/- 8dB (10kHz)
+
treble: +/- 8dB (10kHz)
* Loudness: ja, Taste
+
* Loudness: yes, button
* Subsonic: nein
+
* Subsonic: no
* Mute: nein
+
* Mute: no
* Direct/Line-Straight: ja
+
* Direct/Line-Straight: yes
* Brummspannungsabstand (kurzgeschlossen):
+
* Ripple distance (shorted):
* Stereokanaltrennung:
+
* Stereo Channel Separation:
* Signalrauschabstand:  
+
* Signal-to-noise ratio:  
** IHF-Kurzschluß, A-Netzwerk (DIRECT): PHONO (MM, 5mV): 86dB; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 106dB
+
** IHF short-circuited, A network (DIRECT): PHONO (MM, 5mV): 86dB; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 106dB.
** DIN, Dauerleistung/50mW (DIRECT): PHONO (MM): 71dB/67dB; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 95dB/71dB
+
DIN, continuous power/50mW (DIRECT): PHONO (MM): 71dB/67dB; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 95dB/71dB
  
  
'''Besondere Ausstattungen'''
+
'''Special Features'''
* Aufnahmewahlschalter
+
* Record selector switch
* Lautstärkeregler mit roter LED
+
* Volume control with red LED
* Lautsprecherpaare und Kopfhörer werden über Relais geschaltet
+
* Speaker pairs and headphones are switched via relays
* SR-Bus-Ausgang zur Steuerung weiterer Pioneer-Hifi-Komponenten über die Fernbedienung des Verstärkers
+
* SR-Bus output for controlling other Pioneer hi-fi components via the amplifier's remote control
* Metallfrontplatte
+
* Metal front panel
* Die Eingänge TAPE 1/CD-R/MD und CD werden bei Nichtgebrauch per Relais vom Input-Selector-Chip getrennt
+
* TAPE 1/CD-R/MD and CD inputs are disconnected from the input selector chip by relay when not in use
* Einschaltverzögerung für PHONO-Eingang.
+
* Power-on delay for PHONO input.
* Netzschalter
+
* Power switch
* 1x Euro-Steckdose (max. 100W)
+
* 1x Euro socket (max. 100W)
* Surround-Back-Modus für Surroundreceiver. DIRECT-Taste drei Sekunden lang drücken aktiviert diesen Modus. Der Verstärker reagiert nicht mehr auf die Fernbedienung. Die LED des Lautstärkereglers erlischt. Stellt man den Lautstärkeregler auf Mittenposition, arbeitet das Gerät als Endstufen, die das an LINE/SB anliegende Signal mit einer Empfindlichkeit von 1V verstärkt.
+
* Surround back mode for surround receiver. Press DIRECT button for three seconds to activate this mode. The amplifier no longer responds to the remote control. The volume control LED will turn off. If you set the volume control to the centre position, the unit operates as a power amplifier, amplifying the signal applied to LINE/SB with a sensitivity of 1V.
  
  
== Bemerkungen ==
+
== Remarks ==
'''Weitere Modelle der gleichen Serie'''
+
* Previous model:
* [[Pioneer_A-109|Pioneer A-109]]
+
* [[Pioneer A-407 R]]  
* [[Pioneer_A-209_R|Pioneer A-209R]]
 
  
Die A-x09er Serie ist eine nur geringfügig verbesserte A-x07er Serie (Stabilisatoren); im Prinzip sind die A-x09er-Geräte die MkII-Versionen von A-x07. Die A-x07-Geräte sind die erste Serie mit dem aktuellen Pioneer-Hifi-Design. Nicht alle A-x07er Verstärker wurden durch A-x09er -Versionen ersetzt. So werden der A-307R und der A-607R immer noch als solche hergestellt und verkauft.
 
  
Der A-509R wurden Nummernmäßig upgegradet.
+
* Successor model:
Die Vorgänger des A-509R sind A-405R und A-407R. Mit dem A-407R kam das neue Frontplattendesign, der A-509R zeichnet sich gegenüber dem A-407R durch den Surround-Back-Modus und die kleinen Verbesserungen der A-x09er Serie (Stabilisatoren) aus. Die Leistungsdaten blieben gleich.
+
* [[Pioneer A-30]]
Aus dem A-505R und A-605R ging der A-607R hervor, diese drei haben einen Ringkerntrafo.
 
  
== Bilder ==
 
  
== Berichte ==
+
* The A-x09 series is an only slightly improved A-x07 series (stabilizers); basically the A-x09 units are the MkII versions of A-x07. The A-x07 units are the first series with the current Pioneer hifi design. Not all A-x07 amplifiers have been replaced by A-x09 versions. For example, the A-307R and A-607R are still manufactured and sold as such.
 +
 
 +
 
 +
* The A-509R have been number upgraded.
 +
The predecessors of the A-509R are A-405R and A-407R. With the A-407R came the new front panel design, the A-509R is distinguished from the A-407R by the surround back mode and the small improvements of the A-x09 series (stabilizers). The performance data remained the same.
 +
The A-505R and A-605R evolved into the A-607R, these three have a toroidal transformer.
 +
 
 +
*[Other models in the same series:
 +
* [[Pioneer A-109]]
 +
* [[Pioneer A-209 R]]
 +
* [[Pioneer A-509 R]]
 +
 
 +
 
 +
== Pictures ==
 +
* [[Picture: Pioneer A-509 R
 +
[[File:A509r.jpg]]
 +
 
 +
 
 +
* Excerpt from brochure: Pioneer A-509 R, M-10 X
 +
[[File:Pioneer A-509 R-M-10 X-Prospekt-2001.jpg]]
 +
 
 +
 
 +
== Reports ==
 +
 
  
 
== Links ==
 
== Links ==
 +
 +
 +
[[Category:Integrated amplifier]]

Latest revision as of 12:43, 16 April 2021

Data[edit]

General

  • Manufacturer: Pioneer
  • Model: A-509 R
  • Type: Integrated amplifier
  • Years of manufacture: 2000 - 2006
  • Made in: Japan
  • Color: Black
  • Remote control: yes
  • Power consumption: 160 W
  • Dimensions: 420 x 335 x 128 mm
  • Weight: 6.9 kg
  • Original price approx.: 599 DM


Connections

  • Number of inputs: 6
    • TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, PHONO, TAPE 2 MONITOR
  • Number of outputs: 2
    • TAPE 1/CD-R/MD, TAPE 2 MONITOR


Specifications

  • Continuous power (at distortion)
    • 8 Ohm: 2 x 45W / 0,05 %

4 Ohm: 2 x 65W

  • Dynamic power
    • 8 Ohm:
    • 4 Ohm:
  • Total harmonic distortion: 0.05% (20Hz - 20 kHz, 20W, 8 Ohm).
  • Attenuation factor:
  • Input (Sensitivity/Impedance).
    • PHONO (MM): 2.8mV/50kOhm; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 200mV/50kOhm
  • Output (level/impedance)
    • TAPE 1/CD-R/MD, TAPE 2 MONITOR: 200mV, 1kOhm
  • Frequency response: PHONO (MM): 20Hz - 20kHz, +/- 0.5 dB; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 5Hz - 100kHz, +0/-3dB, DIRECT mode
  • Tone control: analog

Bass: +/- 8dB (100Hz) treble: +/- 8dB (10kHz)

  • Loudness: yes, button
  • Subsonic: no
  • Mute: no
  • Direct/Line-Straight: yes
  • Ripple distance (shorted):
  • Stereo Channel Separation:
  • Signal-to-noise ratio:
    • IHF short-circuited, A network (DIRECT): PHONO (MM, 5mV): 86dB; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 106dB.

DIN, continuous power/50mW (DIRECT): PHONO (MM): 71dB/67dB; TAPE 1/CD-R/MD, CD, TUNER, LINE/SB, TAPE 2 MONITOR: 95dB/71dB


Special Features

  • Record selector switch
  • Volume control with red LED
  • Speaker pairs and headphones are switched via relays
  • SR-Bus output for controlling other Pioneer hi-fi components via the amplifier's remote control
  • Metal front panel
  • TAPE 1/CD-R/MD and CD inputs are disconnected from the input selector chip by relay when not in use
  • Power-on delay for PHONO input.
  • Power switch
  • 1x Euro socket (max. 100W)
  • Surround back mode for surround receiver. Press DIRECT button for three seconds to activate this mode. The amplifier no longer responds to the remote control. The volume control LED will turn off. If you set the volume control to the centre position, the unit operates as a power amplifier, amplifying the signal applied to LINE/SB with a sensitivity of 1V.


Remarks[edit]



  • The A-x09 series is an only slightly improved A-x07 series (stabilizers); basically the A-x09 units are the MkII versions of A-x07. The A-x07 units are the first series with the current Pioneer hifi design. Not all A-x07 amplifiers have been replaced by A-x09 versions. For example, the A-307R and A-607R are still manufactured and sold as such.


  • The A-509R have been number upgraded.

The predecessors of the A-509R are A-405R and A-407R. With the A-407R came the new front panel design, the A-509R is distinguished from the A-407R by the surround back mode and the small improvements of the A-x09 series (stabilizers). The performance data remained the same. The A-505R and A-605R evolved into the A-607R, these three have a toroidal transformer.


Pictures[edit]

  • [[Picture: Pioneer A-509 R

A509r.jpg


  • Excerpt from brochure: Pioneer A-509 R, M-10 X

Pioneer A-509 R-M-10 X-Prospekt-2001.jpg


Reports[edit]

Links[edit]