Difference between revisions of "Nad Model 300"
(→Daten) |
|||
(16 intermediate revisions by 4 users not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[NAD]] (manufactured by Foster Electric Co. Ltd.) |
− | * | + | * Model: Model 300 |
− | * | + | Type: Receiver |
− | * | + | * Years of manufacture: 1975 - 1978 |
− | * | + | * Made in: Japan |
− | * | + | * Color: front silver brushed, lid black |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: approx. 450 W max. |
− | * | + | * Dimensions: 508 x 150 x 440 mm (WxHxD) |
− | * | + | * Weight: 22 kg |
+ | * Original price approx.: 2'500 DM | ||
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: 6 |
* Phono MM: 2 mV 47 KOhm | * Phono MM: 2 mV 47 KOhm | ||
− | * | + | * Microphone: 2,2 mV 80 KOhm |
− | * Aux: 220 mV 50 | + | * Aux: 220 mV 50 KOhm |
* Tape 1: 30 mV | * Tape 1: 30 mV | ||
* Tape 2: 30 mV | * Tape 2: 30 mV | ||
* Main-in | * Main-in | ||
− | * | + | * Number of outputs: |
− | * 2 x 2 | + | * 2 x 2 Speakers 4-16 Ohm |
* 1 x Headphones | * 1 x Headphones | ||
* Tape 1 | * Tape 1 | ||
* Tape 2 | * Tape 2 | ||
* Pre-out | * Pre-out | ||
− | * FM | + | * FM Detector-out |
+ | '''Technical Data''' | ||
− | ''' | + | '''Amplifier''' |
− | + | * Continuous power (1 kHz at THD). | |
− | + | ** 8 Ohm: 2 x 110 W at 8 Ohm (IHF, <0.1% THD) | |
− | * | + | ** 4 Ohm: 2 x 140 W into 4 Ohm (<0,1% THD) |
− | ** 8 Ohm: 2 | + | * Dynamic power |
− | ** 4 Ohm: 2 | ||
− | * | ||
** 8 Ohm: 2 x 150 W | ** 8 Ohm: 2 x 150 W | ||
− | ** 4 | + | ** 4 ohms: |
− | * | + | * Total harmonic distortion: <0.3% at 20Hz-20kHz and 85W into 8 ohms(<0.03% at 1 kHz and 65W into 8 ohms). |
− | * | + | * Preamplifier distortion: <0.02% |
− | * Intermodulation: | + | * Intermodulation: < 0.06% (1 W into 4 ohms) |
− | * | + | * Attenuation factor: |
− | * | + | * Frequency response: 20Hz - 20kHz (+0.5dB/-1dB). |
− | + | Signal to Noise Ratio: 85dB (High Level Inputs) | |
− | + | Signal to Noise Ratio: 63dB (Phono) | |
− | * | + | * Stereo channel separation: 80dB (at 1kHz). |
− | * | + | * Tone control: |
** Bass: 100Hz +/- 10 dB | ** Bass: 100Hz +/- 10 dB | ||
− | + | Treble: 10kHz +/- 10 dB | |
* Loudness: | * Loudness: | ||
− | * High Filter: | + | * High Filter: switchable -5dB at 7 kHz |
− | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): switchable -15dB at 10Hz |
− | * Mute: | + | * Mute: no |
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, AM |
− | * | + | * Frequencies: |
− | + | * FM 87.7-108 MHz | |
− | + | * AM 525-1650 kHz | |
− | * | + | * Frequency response: |
− | * | + | * Input sensitivity: FM 1.8 µV (IHF). |
− | * | + | * Input sensitivity: AM 20 µV |
− | * | + | * Distortion factor: 0.03% (mono), 0.3% (stereo) |
− | * | + | * Signal to noise ratio (FM): 73dB |
− | * | + | * Channel separation: 45dB |
− | * | + | * Selectivity: 75dB |
− | * | + | * Co-wave selection: 2dB |
− | * | + | * Spurious wave selection: |
− | * | + | * IF attenuation: 83dB |
− | * | + | * IF attenuation: 90dB |
− | * AM | + | * AM suppression: 50dB |
− | * | + | * Pilot tone attenuation: 60dB |
− | * | + | |
− | * | + | |
− | * | + | '''Special Features''' |
+ | * Integrated Dolby B Processor, separately switchable Strecher and Expander | ||
+ | * Dynaquad(R) Quasi Quadrofonie, switchable | ||
+ | * Switchable noise filter for weak FM stereo signal (hi-blend) | ||
+ | 400Hz calibration tone generator. | ||
+ | * TB II can be connected to either the front or rear panel. | ||
+ | * Separate tone controls for right and left channel. | ||
+ | |||
+ | |||
+ | == Remarks == | ||
+ | * Other models in the same series: | ||
+ | * Integrated amplifiers: | ||
+ | * [[NAD Model 60]] | ||
+ | * [[NAD Model 90]] | ||
+ | * [[NAD Model 200]] | ||
+ | |||
+ | |||
+ | * [[Tuner: | ||
+ | * [[NAD Model 100]] | ||
− | + | * Receiver: | |
− | * | + | * [[NAD Model 120]] |
− | * | + | * [[NAD Model 140]] |
− | * | + | * [[NAD Model 160]] |
− | * | + | * [[NAD Model 160a]] |
− | * | + | * [[Nad Model 300]] |
− | * | ||
− | |||
− | |||
− | == | + | * [[Tape Deck]] |
+ | * [[NAD Model 900]] | ||
+ | |||
+ | |||
+ | * Headphones: | ||
+ | * [[NAD 05]] | ||
+ | * [[NAD 10]] | ||
+ | * [[NAD 16]] | ||
+ | * [[NAD 20 E]] | ||
+ | * [[NAD RP 18]] | ||
+ | |||
+ | |||
+ | == Pictures == | ||
+ | * Image: Nad Model 300 | ||
+ | [[File:NAD Model 300-1.jpg]] | ||
+ | |||
+ | |||
+ | == Reports == | ||
− | |||
== Links == | == Links == | ||
+ | |||
+ | |||
+ | [[Category:Receiver]] |
Latest revision as of 05:03, 22 October 2020
Data[edit]
General
- Manufacturer: NAD (manufactured by Foster Electric Co. Ltd.)
- Model: Model 300
Type: Receiver
- Years of manufacture: 1975 - 1978
- Made in: Japan
- Color: front silver brushed, lid black
- Remote control: no
- Power consumption: approx. 450 W max.
- Dimensions: 508 x 150 x 440 mm (WxHxD)
- Weight: 22 kg
- Original price approx.: 2'500 DM
Connections
- Number of inputs: 6
- Phono MM: 2 mV 47 KOhm
- Microphone: 2,2 mV 80 KOhm
- Aux: 220 mV 50 KOhm
- Tape 1: 30 mV
- Tape 2: 30 mV
- Main-in
- Number of outputs:
- 2 x 2 Speakers 4-16 Ohm
- 1 x Headphones
- Tape 1
- Tape 2
- Pre-out
- FM Detector-out
Technical Data
Amplifier
- Continuous power (1 kHz at THD).
- 8 Ohm: 2 x 110 W at 8 Ohm (IHF, <0.1% THD)
- 4 Ohm: 2 x 140 W into 4 Ohm (<0,1% THD)
- Dynamic power
- 8 Ohm: 2 x 150 W
- 4 ohms:
- Total harmonic distortion: <0.3% at 20Hz-20kHz and 85W into 8 ohms(<0.03% at 1 kHz and 65W into 8 ohms).
- Preamplifier distortion: <0.02%
- Intermodulation: < 0.06% (1 W into 4 ohms)
- Attenuation factor:
- Frequency response: 20Hz - 20kHz (+0.5dB/-1dB).
Signal to Noise Ratio: 85dB (High Level Inputs) Signal to Noise Ratio: 63dB (Phono)
- Stereo channel separation: 80dB (at 1kHz).
- Tone control:
- Bass: 100Hz +/- 10 dB
Treble: 10kHz +/- 10 dB
- Loudness:
- High Filter: switchable -5dB at 7 kHz
- Low Filter (Subsonic): switchable -15dB at 10Hz
- Mute: no
Tuner
- Reception: FM, AM
- Frequencies:
- FM 87.7-108 MHz
- AM 525-1650 kHz
- Frequency response:
- Input sensitivity: FM 1.8 µV (IHF).
- Input sensitivity: AM 20 µV
- Distortion factor: 0.03% (mono), 0.3% (stereo)
- Signal to noise ratio (FM): 73dB
- Channel separation: 45dB
- Selectivity: 75dB
- Co-wave selection: 2dB
- Spurious wave selection:
- IF attenuation: 83dB
- IF attenuation: 90dB
- AM suppression: 50dB
- Pilot tone attenuation: 60dB
Special Features
- Integrated Dolby B Processor, separately switchable Strecher and Expander
- Dynaquad(R) Quasi Quadrofonie, switchable
- Switchable noise filter for weak FM stereo signal (hi-blend)
400Hz calibration tone generator.
- TB II can be connected to either the front or rear panel.
- Separate tone controls for right and left channel.
Remarks[edit]
- Other models in the same series:
- Integrated amplifiers:
- NAD Model 60
- NAD Model 90
- NAD Model 200
- [[Tuner:
- NAD Model 100
Pictures[edit]
- Image: Nad Model 300