Difference between revisions of "Nakamichi SR-4 E"

(Berichte)
 
(11 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
__NOTOC__
 
__NOTOC__
== Daten ==
+
== Data ==
{{Navigation}}
+
{{navigation}}
'''Allgemein'''
+
'''General'''
* Hersteller: [[Nakamichi]]
+
* Manufacturer: [[Nakamichi]]
* Modell: SR-4E
+
* Model: SR-4E
* Baujahre: um 1988-1990
+
* Type: Receiver
* Hergestellt in: Japan
+
* Years of manufacture: 1988 - 1990
* Farbe: schwarz
+
* Made in: Japan
* Fernbedienung: nein
+
* Color: Black
* Leistungsaufnahme: max. 350W
+
* Remote control: no
* Abmessungen: 430 x 100 x 370 mm (BxHxT)
+
* Power consumption: max. 350 W
* Gewicht: 9,8 kg
+
* Dimensions (WxHxD): 430 x 100 x 370 mm  
* Neupreis ca.:  
+
* Weight: 9.8 kg
 +
* Original price approx.: 2'500 DM
  
  
'''Anschlüsse'''
+
'''Connections'''
* Anzahl der Eingänge:
+
* Number of inputs:
 
** 2x Video/Aux (200 mV, 20 kOhm)
 
** 2x Video/Aux (200 mV, 20 kOhm)
** 1x VCR/Tape2 (200 mV, 20 kOhm)
+
1x VCR/Tape2 (200 mV, 20 kOhm)
** 1x Tape In (200 mV, 20 kOhm)
+
1x Tape In (200 mV, 20 kOhm)
** 1x CD In (200 mV, 20 kOhm)
+
1x CD In (200 mV, 20 kOhm)
** Phono (MM 140 mV; 47kOhm / MC 3/8 mV; 100 Ohm )
+
Phono (MM 140 mV; 47kOhm / MC 3/8 mV; 100 Ohm )
** FM-Antenne (75/300 Ohm)
+
** FM antenna (75/300 Ohm)
** AM-Antenne
+
** AM antenna
* Anzahl der Ausgänge:
+
* Number of outputs:
 
** 1x Tape Out
 
** 1x Tape Out
 
** 1x Video/Tape2 Out
 
** 1x Video/Tape2 Out
 
** 1x Monitor Out
 
** 1x Monitor Out
** Kopfhörer (6,3mm Klinke)
+
** Headphones (6,3mm jack)
** 2 Lautsprecherpaare
+
** 2 pairs of speakers
 
 
 
** Processor Loop OUT/IN f. Equalizer/ Surround
 
** Processor Loop OUT/IN f. Equalizer/ Surround
  
  
'''Technische Daten'''
+
'''Technical Data'''
 
 
''Verstärker''
 
* Sinus Dauerleistung
 
** 8 Ohm: 2x 60 W (DIN),
 
  
* Impulsleistung
+
''Amplifier''
 +
* Sine continuous power
 +
8 Ohm: 2x 60 W (DIN),
 +
* pulse power
 
** 8 Ohm: 2x 85W
 
** 8 Ohm: 2x 85W
 
** 4 Ohm: 2x 125W
 
** 4 Ohm: 2x 125W
* Gesamtklirrfaktor: 0,1% (bei Nennleistung)
+
* Total harmonic distortion: 0.1% (at nominal power)
* Dämpfungsfaktor: 77 (8 Ohm)
+
* Attenuation factor: 77 (8 Ohm)
* Frequenzgang: 20 - 20.000 Hz (+0; -1 dB, Deutschlandmodell)
+
* Frequency response: 20 - 20,000 Hz (+0; -1 dB, Germany model)
* Frequenzgang: 20 - 20.000 Hz (+0; -0,5 dB, sonnst
+
* Frequency response: 20 - 20,000 Hz (+0; -0.5 dB, Germany model)
* Frequenzgang: 5 - 45.000 Hz (+0; -3 dB, Deutschlandmodell)
+
* Frequency response: 5 - 45,000 Hz (+0; -3 dB, Germany model)
* Frequenzgang: 5 - 75.000 Hz (+0; -3 dB, sonnst)
+
* Frequency response: 5 - 75,000 Hz (+0; -3 dB, otherwise)
* Signalrauschabstand:
+
* Signal-to-noise ratio:
** Phono: besser 78 dB MM; 71 dB MC
+
** Phono: better 78 dB MM; 71 dB MC
** Endstufe: besser 105 dB  
+
** Power amplifier: better 105 dB  
* Klangregelung:
+
* Tone control:
** Bass: ja
+
** Bass: yes
** Mitten: nein
+
** Mids: no
** Höhen: ja
+
treble: yes
* Loudness: variabel Loudness
+
* Loudness: variable Loudness
* Subsonic: Ja
+
* Subsonic: yes
* Mute: Ja
+
* Mute: Yes
 
* Direct/Line-Straight:  
 
* Direct/Line-Straight:  
* Stereokanaltrennung:
+
 
  
 
''Tuner''
 
''Tuner''
* Empfang: UKW, MW
+
* Reception: FM, MW
* Frequenzen:
+
* Frequencies:
** UKW: 87,4 - 108 MHz
+
** FM: 87.4 - 108 MHz
 
** MW: 515 - 1.611 kHz  
 
** MW: 515 - 1.611 kHz  
* Frequenzgang: 20 - 15000 Hz  
+
* Frequency response: 20 - 15,000 Hz  
* Eingangsmpfindlichkeit:
+
* Input sensitivity:
** UKW Mono: 23 dBf / 7.7 müV  
+
** FM Mono: 23 dBf / 7.7 müV  
** UKW Stereo: 43 dBf / 77.4 müV  
+
VHF Stereo: 43 dBf / 77.4 müV  
** MW: 53 dB mü/m   
+
MW: 53 dB mü/m   
* Klirrfaktor UKW: kleiner 0,2%
+
Distortion factor FM: less than 0.2  
* Klirrfaktor MW: kleiner 0,3%
+
Distortion factor MW: less than 0.3
* Signalrauschabstand: 74 dB (Mono), 69 dB (Stereo)
+
Signal-to-noise ratio: 74 dB (mono), 69 dB (stereo)
* Fremdspannungsabstand:  
+
* Signal-to-noise ratio:  
* Kanaltrennung: besser 43 dB (1kHz)
+
* Channel separation: better 43 dB (1kHz)
* Trennschärfe UKW: 70 dB (+/-300kHz)
+
* selectivity FM: 70 dB (+/-300kHz)
* Trennschärfe MW : 20 dB (+/-9kHz)
+
* selectivity MW : 20 dB (+/-9kHz)
* Gleichwellenselektion: 2.0 dB
+
* Co-wave selection: 2.0 dB
* Nebenwellenunterdrückung: besser 90dB
+
* Spurious suppression: better 90 dB
* Spiegelfrequenzdämpfung: besser 75 dB
+
* IF attenuation: better 75 dB
* ZF-Dämpfung: besser 80dB
+
* IF attenuation: better 80 dB
* AM-Unterdrückung: besse 60 dB
+
* AM rejection: better 60 dB
* Ausgangspegel:
+
* Output level:
* RDS: nein
+
* RDS: no
* Stationsspeicher: 10
+
* Station memory: 10
  
  
'''Besondere Ausstattungen'''
+
'''Special Features'''
* Fernbedienung
+
* Remote control
  
  
== Bemerkungen ==
+
== Remarks ==
Weitere Modelle der gleichen Serie: SR2-E; SR3-E
+
* Other models in the same series:
Nachfolgeserie: TA2-E ..TA4-E
+
* [[Nakamichi SR-2 E]]
 +
* [[Nakamichi SR-3 E]]
 +
* [[Nakamichi SR-4 E]]
  
STASIS - Schaltung in Lizenz Threshold Co.
 
  
== Bilder ==
+
* [[Successor series:
 +
* [[Nakamichi TA-2 E]]
 +
* [[Nakamichi TA-3 E]]
 +
* [[Nakamichi TA-4 E]]
  
== Berichte ==
 
* Reiner Kruse bei hifi-classic-reparatur.de (2. April 2014), siehe auch Link unten:
 
"Die von Thereshold entwickelte Stasis Schaltung, Garant für laststabile Stromversorgung im niedrigohmigen Leistungsbereich, werkelte in den bekannten Endstufen, und in den flachen Receivern!
 
  
Die SR2,3 und ,4 Receiver waren fernbedienbar, hatten eine gut klingende Phonosektion (der 2er leider nur MM) und natürlich einen hervorragenden Tuner eingebaut.
+
* STASIS - circuit licensed to [[Threshold|Threshold Co.]]
Klanglich neigen dies Teile zu einer natürlichen, eher tiefen und breiten, als hohen Bühne.
+
 
Ein SR4 klingt viel natürlicher als z.B. ein [[Accuphase E-206]], der lauter und größer spielt, aber wesentlich unmusikalischer.
+
 
Details werden wunderbar aufgelöst mit der Betonung der Feinheiten und Strukturen, im besten Sinne analytisch.
+
== Pictures ==
Dabei sehen die Teile noch schick aus und sind gut stellbar, halt keine Trümmer."
+
 
 +
 
 +
== Reports ==
 +
* Rainer Kruse at hifi-classic-reparatur.de (April 2, 2014), see also link below:
 +
* "The Stasis circuit developed by Threshold, guarantor for load stable power supply in the low impedance power range, worked in the well-known power amplifiers, and in the flat receivers!".
 +
 
 +
The SR-2,3 and 4 receivers, the SR-4 even remote controllable, had a good sounding phono section (the 2 unfortunately only MM) and of course an excellent tuner built in.
 +
Sound-wise, these parts tend to have a natural low and wide, rather than high, stage.
 +
* An SR-4 sounds much more natural than, say, an [[Accuphase E-206]], which plays louder and bigger, but much less musical.
 +
Details are beautifully resolved with an emphasis on subtleties and textures, analytical in the best sense.
 +
* At the same time the parts still look smart and are well adjustable, just no debris.<br />
 +
* If you get your hands on a semi-maintained unit today, after more than 20 years, they run flawlessly. A manufacturing quality that the Europeans and Yanks were running after!"
 +
 
 +
 
 +
* Report in "FonoForum" 7 / 1988
 +
 
  
 
== Links ==
 
== Links ==
*[https://hifi-classic-reparatur.de/2014/04/nakamichi-eben-nicht-nur-tape-decks/ Nakamichi-SR-Receiver-Bewertung it nettem Katalogbild bei hifi-classic-reparatur.de] vom 2. April 2014, abgerufen 17. Dezember 2017.
+
* [https://hifi-classic-reparatur.de/2014/04/nakamichi-eben-nicht-nur-tape-decks/ Nakamichi SR receiver review with nice catalogue picture at hifi-classic-reparatur.de] from April 2, 2014, retrieved December 17, 2017.
<br />
+
 
 +
 
  
[[Kategorie:Receiver]]
+
[[Category:Receiver]]

Latest revision as of 12:59, 21 April 2020

Data[edit]

General

  • Manufacturer: Nakamichi
  • Model: SR-4E
  • Type: Receiver
  • Years of manufacture: 1988 - 1990
  • Made in: Japan
  • Color: Black
  • Remote control: no
  • Power consumption: max. 350 W
  • Dimensions (WxHxD): 430 x 100 x 370 mm
  • Weight: 9.8 kg
  • Original price approx.: 2'500 DM


Connections

  • Number of inputs:
    • 2x Video/Aux (200 mV, 20 kOhm)

1x VCR/Tape2 (200 mV, 20 kOhm) 1x Tape In (200 mV, 20 kOhm) 1x CD In (200 mV, 20 kOhm) Phono (MM 140 mV; 47kOhm / MC 3/8 mV; 100 Ohm )

    • FM antenna (75/300 Ohm)
    • AM antenna
  • Number of outputs:
    • 1x Tape Out
    • 1x Video/Tape2 Out
    • 1x Monitor Out
    • Headphones (6,3mm jack)
    • 2 pairs of speakers
    • Processor Loop OUT/IN f. Equalizer/ Surround


Technical Data

Amplifier

  • Sine continuous power

8 Ohm: 2x 60 W (DIN),

  • pulse power
    • 8 Ohm: 2x 85W
    • 4 Ohm: 2x 125W
  • Total harmonic distortion: 0.1% (at nominal power)
  • Attenuation factor: 77 (8 Ohm)
  • Frequency response: 20 - 20,000 Hz (+0; -1 dB, Germany model)
  • Frequency response: 20 - 20,000 Hz (+0; -0.5 dB, Germany model)
  • Frequency response: 5 - 45,000 Hz (+0; -3 dB, Germany model)
  • Frequency response: 5 - 75,000 Hz (+0; -3 dB, otherwise)
  • Signal-to-noise ratio:
    • Phono: better 78 dB MM; 71 dB MC
    • Power amplifier: better 105 dB
  • Tone control:
    • Bass: yes
    • Mids: no

treble: yes

  • Loudness: variable Loudness
  • Subsonic: yes
  • Mute: Yes
  • Direct/Line-Straight:


Tuner

  • Reception: FM, MW
  • Frequencies:
    • FM: 87.4 - 108 MHz
    • MW: 515 - 1.611 kHz
  • Frequency response: 20 - 15,000 Hz
  • Input sensitivity:
    • FM Mono: 23 dBf / 7.7 müV

VHF Stereo: 43 dBf / 77.4 müV MW: 53 dB mü/m Distortion factor FM: less than 0.2 Distortion factor MW: less than 0.3 Signal-to-noise ratio: 74 dB (mono), 69 dB (stereo)

  • Signal-to-noise ratio:
  • Channel separation: better 43 dB (1kHz)
  • selectivity FM: 70 dB (+/-300kHz)
  • selectivity MW : 20 dB (+/-9kHz)
  • Co-wave selection: 2.0 dB
  • Spurious suppression: better 90 dB
  • IF attenuation: better 75 dB
  • IF attenuation: better 80 dB
  • AM rejection: better 60 dB
  • Output level:
  • RDS: no
  • Station memory: 10


Special Features

  • Remote control


Remarks[edit]




Pictures[edit]

Reports[edit]

  • Rainer Kruse at hifi-classic-reparatur.de (April 2, 2014), see also link below:
  • "The Stasis circuit developed by Threshold, guarantor for load stable power supply in the low impedance power range, worked in the well-known power amplifiers, and in the flat receivers!".

The SR-2,3 and 4 receivers, the SR-4 even remote controllable, had a good sounding phono section (the 2 unfortunately only MM) and of course an excellent tuner built in. Sound-wise, these parts tend to have a natural low and wide, rather than high, stage.

  • An SR-4 sounds much more natural than, say, an Accuphase E-206, which plays louder and bigger, but much less musical.

Details are beautifully resolved with an emphasis on subtleties and textures, analytical in the best sense.

  • At the same time the parts still look smart and are well adjustable, just no debris.
  • If you get your hands on a semi-maintained unit today, after more than 20 years, they run flawlessly. A manufacturing quality that the Europeans and Yanks were running after!"


  • Report in "FonoForum" 7 / 1988


Links[edit]