Difference between revisions of "Nikko STA-5050"
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Nikko]] |
− | * | + | * Model: STA-5050 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1975 - 1977 |
− | * | + | * Made in: Japan |
− | * | + | * Color: silver, wooden cabinet |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 110 W max. |
− | * | + | * Dimensions: 450 x 135 x 380 mm (WxHxD) |
− | * | + | * Weight: 9 kg |
− | * | + | * Original price approx.: 999 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
** Phono: 2 mV, 50 kOhm | ** Phono: 2 mV, 50 kOhm | ||
− | + | Aux: 200 mV, 50 kOhm | |
** Tape Play 1, 2: 200 mV, 50 kOhm | ** Tape Play 1, 2: 200 mV, 50 kOhm | ||
− | ** 4- | + | ** 4-channel In: 200 mV, 50 kOhm |
− | + | FM antenna: 300 Ohm / 75 Ohm | |
− | ** MW | + | ** MW antenna: 300 Ohm |
− | * | + | * Number of outputs: |
** Tape Rec 1, 2: 750 mV | ** Tape Rec 1, 2: 750 mV | ||
− | ** 4- | + | ** 4-Channel Out: 300 mV |
− | ** | + | ** Headphones: 200 Ohm (6,3mm jack, front) |
− | ** 2 | + | ** 2 pairs of speakers: (4-16 Ohm) |
− | ''' | + | '''Technical Data''' |
− | '' | + | '''Amplifier''' |
− | * | + | * Continuous power (at distortion): |
** 8 Ohm: 2x 18 W RMS | ** 8 Ohm: 2x 18 W RMS | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power: |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0,8 % |
− | * | + | * Attenuation factor: > 30 |
− | * | + | * Frequency response: 20 Hz - 30 kHz |
− | * | + | * Signal-to-noise ratio: |
** Phono MM: 70 dB | ** Phono MM: 70 dB | ||
− | ** | + | ** High level: 80 dB |
− | * | + | * Tone control: |
− | ** Bass: | + | ** Bass: yes, ± 12 dB at 70 Hz |
− | + | treble: yes, ± 12 dB at 10 kHz | |
− | * Loudness: | + | * Loudness: yes, + 10 dB at 70 Hz, + 6 dB at 10 kHz |
* High Filter: | * High Filter: | ||
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
Line 55: | Line 55: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87 - 108 MHz |
− | + | MW: 525 - 1'605 kHz | |
− | * | + | * Frequency response: 30 - 15'000 Hz, ± 0,5 dB |
− | ** | + | ** VHF: 2.1 µV |
** MW: 250 µV | ** MW: 250 µV | ||
− | * | + | * Distortion factor: |
− | ** | + | ** FM: 0.5/0.8 % (mono/stereo) |
− | + | Signal-to-noise ratio: 60 dB /56 dB (mono/stereo) | |
− | * | + | * Channel separation: |
− | ** | + | ** FM: > 38 dB |
− | * | + | * Selectivity: |
− | ** | + | ** FM: > 40 dB |
− | + | MW: 25 dB | |
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: 3.0 dB |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: |
− | * | + | * Mirror frequency attenuation: |
− | ** | + | ** FM: 60 dB |
** MW: 45 dB | ** MW: 45 dB | ||
− | + | IF attenuation: | |
− | ** | + | ** FM: 80 dB |
** MW: 43 dB | ** MW: 43 dB | ||
− | * AM | + | * AM suppression: 60 dB |
− | ''' | + | '''Special Features''' |
* Tape Dubbing | * Tape Dubbing | ||
− | * Tape 2, | + | * Tape 2, input and output with 6.3mm jack, front |
− | * | + | * FM muting |
− | == | + | == Notes == |
− | * | + | * Other models in the same series: |
* [[Nikko STA-5050]] | * [[Nikko STA-5050]] | ||
* [[Nikko STA-7070]] | * [[Nikko STA-7070]] | ||
Line 97: | Line 97: | ||
− | == | + | == Pictures == |
− | * | + | * Image: Nikko STA-5050 |
− | [[ | + | [[File:1977 Nikko Preise.jpg]] |
− | * | + | * Extract from brochure: Nikko STA-5050 |
− | [[ | + | [[File:Nikko STA-5050-Prospekt-1.jpg]] |
− | == | + | == Reports == |
− | * | + | * Review from "Good Old Hifi": [[http://www.good-old-hifi.de/nikko-sta-7070/]] |
+ | |||
+ | [[File:1977 Nikko Preise.jpg]] | ||
Line 113: | Line 115: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 09:53, 14 April 2020
Data[edit]
General
- Manufacturer: Nikko
- Model: STA-5050
- Type: Receiver
- Years of manufacture: 1975 - 1977
- Made in: Japan
- Color: silver, wooden cabinet
- Remote control: no
- Power consumption: 110 W max.
- Dimensions: 450 x 135 x 380 mm (WxHxD)
- Weight: 9 kg
- Original price approx.: 999 DM
Connections
- Number of inputs:
- Phono: 2 mV, 50 kOhm
Aux: 200 mV, 50 kOhm
- Tape Play 1, 2: 200 mV, 50 kOhm
- 4-channel In: 200 mV, 50 kOhm
FM antenna: 300 Ohm / 75 Ohm
- MW antenna: 300 Ohm
- Number of outputs:
- Tape Rec 1, 2: 750 mV
- 4-Channel Out: 300 mV
- Headphones: 200 Ohm (6,3mm jack, front)
- 2 pairs of speakers: (4-16 Ohm)
Technical Data
Amplifier
- Continuous power (at distortion):
- 8 Ohm: 2x 18 W RMS
- 4 Ohm:
- Dynamic power:
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0,8 %
- Attenuation factor: > 30
- Frequency response: 20 Hz - 30 kHz
- Signal-to-noise ratio:
- Phono MM: 70 dB
- High level: 80 dB
- Tone control:
- Bass: yes, ± 12 dB at 70 Hz
treble: yes, ± 12 dB at 10 kHz
- Loudness: yes, + 10 dB at 70 Hz, + 6 dB at 10 kHz
- High Filter:
- Low Filter (Subsonic):
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87 - 108 MHz
MW: 525 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 0,5 dB
- VHF: 2.1 µV
- MW: 250 µV
- Distortion factor:
- FM: 0.5/0.8 % (mono/stereo)
Signal-to-noise ratio: 60 dB /56 dB (mono/stereo)
- Channel separation:
- FM: > 38 dB
- Selectivity:
- FM: > 40 dB
MW: 25 dB
- Equal wave selection:
- FM: 3.0 dB
- Spurious wave selection:
- FM:
- Mirror frequency attenuation:
- FM: 60 dB
- MW: 45 dB
IF attenuation:
- FM: 80 dB
- MW: 43 dB
- AM suppression: 60 dB
Special Features
- Tape Dubbing
- Tape 2, input and output with 6.3mm jack, front
- FM muting
Notes[edit]
- Other models in the same series:
- Nikko STA-5050
- Nikko STA-7070
- Nikko STA-8080
- Nikko STA-9090
Pictures[edit]
- Image: Nikko STA-5050
- Extract from brochure: Nikko STA-5050
Reports[edit]
- Review from "Good Old Hifi": [[1]]