Difference between revisions of "Rotel RX-400 A"
(4 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Rotel]] |
− | * | + | * Model: RX-400 A |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1973 - 1976 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver, wooden cabinet |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: |
− | * | + | * Dimensions (WxHxD): 425 x 135 x 330 mm. |
− | * | + | * Weight: 7.1 kg |
+ | * Original price approx.: 845 DM | ||
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM: 2 mV, 50 kOhm | + | ** Phono MM: 2 mV, 50 kOhm. |
− | + | Aux: 150 mV, 50 kOhm, max. 15 V | |
− | + | Tape Play: 150 mV, 50 kOhm, max. 15 V | |
− | + | Main In: 1.5 V, 50 kOhm | |
− | ** | + | ** Antenna VHF (75/300 Ohm), MW (300 Ohm) |
− | * | + | * Number of outputs: |
− | ** Tape Rec: 350 mV, 3 | + | ** Tape Rec: 350 mV, 3.3 kOhm |
** Tape Rec DIN: 120 mV, 90 kOhm | ** Tape Rec DIN: 120 mV, 90 kOhm | ||
** Pre Out: | ** Pre Out: | ||
− | ** | + | ** Headphones: |
− | ** 2 | + | ** 2 pairs of speakers |
− | ''' | + | '''Technical Specifications''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (at distortion) |
** 8 Ohm: 2x 15 Watt (20 Hz - 20'000 Hz) | ** 8 Ohm: 2x 15 Watt (20 Hz - 20'000 Hz) | ||
** 4 Ohm: 2x 20 Watt (1 kHz) | ** 4 Ohm: 2x 20 Watt (1 kHz) | ||
− | * | + | * Dynamic power |
** 8 Ohm: 2x 20 Watt | ** 8 Ohm: 2x 20 Watt | ||
** 4 Ohm: 2x 30 Watt | ** 4 Ohm: 2x 30 Watt | ||
− | * | + | * Frequency response: 15 Hz - 50 kHz |
− | * | + | * Distortion factor: < 0.6 |
− | * | + | * Attenuation factor: 30 at 8 Ohm |
− | * | + | * Signal-to-noise ratio: |
** Phono MM: 70 dB | ** Phono MM: 70 dB | ||
− | + | High level: 90 dB | |
− | * | + | * Tone control |
− | + | Bass: ± 10 dB at 100 Hz | |
− | + | Treble: ± 10 dB at 10 kHz | |
− | * Loudness: + 10 dB | + | * Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz |
* High Filter: | * High Filter: | ||
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
Line 55: | Line 56: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87 - 108 MHz |
− | + | MW: 525 - 1'605 kHz | |
− | * | + | * Frequency response: 30 - 15'000 Hz, ± 0,5 dB |
− | * | + | * Input sensitivity: 2.2 µV (IHF) |
− | * | + | * Distortion factor: < 1 % |
* Signalrauschabstand: | * Signalrauschabstand: | ||
** Mono: 60 dB | ** Mono: 60 dB | ||
Line 68: | Line 69: | ||
* Trennschärfe: 40 dB | * Trennschärfe: 40 dB | ||
* Gleichwellenselektion: 1,5 dB | * Gleichwellenselektion: 1,5 dB | ||
− | * Nebenwellenselektion: > 90 dB | + | * Nebenwellenselektion: >90 dB |
− | * | + | * Image frequency attenuation: > 100 dB |
− | * | + | * IF attenuation: > 100 dB (at 98 MHz) |
− | * AM | + | * AM suppression: 60 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * Monitor button |
− | == | + | == Remarks == |
− | * | + | * Other receivers in the same series: |
** [[Rotel RX-154 A]] | ** [[Rotel RX-154 A]] | ||
** [[Rotel RX-400 A]] | ** [[Rotel RX-400 A]] | ||
Line 86: | Line 87: | ||
− | * | + | * Amplifiers of the same series: |
** [[Rotel RA-1210]] | ** [[Rotel RA-1210]] | ||
− | * | + | * Tuners of the same series: |
** [[Rotel RT-1220]] | ** [[Rotel RT-1220]] | ||
− | * | + | * Headphones of the same series: |
− | ** [[Rotel RH | + | ** [[Rotel RH 430]] |
− | ** [[Rotel RH | + | ** [[Rotel RH 630]] |
− | ** [[Rotel RH | + | ** [[Rotel RH 700]] |
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Rotel RX-400 A |
− | [[ | + | [[File:Rotel RX-400 A-Prospekt-1.jpg]] |
− | * | + | * Picture: Rotel RX-400 A |
− | [[ | + | [[File:Rotel RX-400 A.jpg]] |
− | == | + | == Reports == |
== Links == | == Links == | ||
− | [[ | + | |
+ | [[Category:Receiver]]</1> |
Latest revision as of 01:17, 10 December 2019
Data[edit]
General
- Manufacturer: Rotel
- Model: RX-400 A
- Type: Receiver
- Years of manufacture: 1973 - 1976
- Made in: Japan
- Color: Silver, wooden cabinet
- Remote control: no
- Power consumption:
- Dimensions (WxHxD): 425 x 135 x 330 mm.
- Weight: 7.1 kg
- Original price approx.: 845 DM
Connections
- Number of inputs:
- Phono MM: 2 mV, 50 kOhm.
Aux: 150 mV, 50 kOhm, max. 15 V Tape Play: 150 mV, 50 kOhm, max. 15 V Main In: 1.5 V, 50 kOhm
- Antenna VHF (75/300 Ohm), MW (300 Ohm)
- Number of outputs:
- Tape Rec: 350 mV, 3.3 kOhm
- Tape Rec DIN: 120 mV, 90 kOhm
- Pre Out:
- Headphones:
- 2 pairs of speakers
Technical Specifications
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 15 Watt (20 Hz - 20'000 Hz)
- 4 Ohm: 2x 20 Watt (1 kHz)
- Dynamic power
- 8 Ohm: 2x 20 Watt
- 4 Ohm: 2x 30 Watt
- Frequency response: 15 Hz - 50 kHz
- Distortion factor: < 0.6
- Attenuation factor: 30 at 8 Ohm
- Signal-to-noise ratio:
- Phono MM: 70 dB
High level: 90 dB
- Tone control
Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 10 kHz
- Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
- High Filter:
- Low Filter (Subsonic):
- Muting:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87 - 108 MHz
MW: 525 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 0,5 dB
- Input sensitivity: 2.2 µV (IHF)
- Distortion factor: < 1 %
- Signalrauschabstand:
- Mono: 60 dB
- Stereo: 55 dB
- Kanaltrennung: 35 dB
- Trennschärfe: 40 dB
- Gleichwellenselektion: 1,5 dB
- Nebenwellenselektion: >90 dB
- Image frequency attenuation: > 100 dB
- IF attenuation: > 100 dB (at 98 MHz)
- AM suppression: 60 dB
Special Features
- Monitor button
Remarks[edit]
- Other receivers in the same series:
- Amplifiers of the same series:
- Tuners of the same series:
- Headphones of the same series:
Pictures[edit]
- Extract from brochure: Rotel RX-400 A
- Picture: Rotel RX-400 A
Reports[edit]
Links[edit]
</1>