Difference between revisions of "Fisher 301"
(Die Seite wurde neu angelegt: „__NOTOC__ == Daten == {{Navigation}} '''Allgemein''' * Hersteller: Fisher * Modell: 301 * Typ: Receiver * Baujahre: 1971 - 1973 * Hergestellt in: USA * Far…“) |
|||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Fisher]] |
− | * | + | * Model: 301 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1971 - 1973 |
− | * | + | * Made in: USA |
− | * | + | * Color: silver, housing walnut |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: |
− | * | + | * Dimensions: 470 x 140 x 407 mm (WxHxD). |
− | * | + | * Weight: 9,2 kg |
− | * | + | * Original price approx.: 350 US-$, 1972, 1'860 DM |
− | |||
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono (MM): 2 | + | ** Phono (MM): 2.8 mV / 50 kOhm, 50 mV max. |
− | + | Aux 1, 2: 200 mV / 100 kOhm, 3.5 V max. | |
** Tape Play: 300 mV / 100 kOhm | ** Tape Play: 300 mV / 100 kOhm | ||
** Tape Play DIN: 300 mV / 100 kOhm | ** Tape Play DIN: 300 mV / 100 kOhm | ||
− | * | + | * Number of outputs: |
− | ** Tape Rec: 400 mV / 2 | + | ** Tape Rec: 400 mV / 2.2 kOhm |
** Tape Rec DIN: 4 mV / 10 kOhm | ** Tape Rec DIN: 4 mV / 10 kOhm | ||
− | ** | + | ** Headphones: 5 V, 100 Ohm |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (at distortion) |
− | + | 8 Ohm: 2x 45 W | |
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Dynamic power |
** 8 Ohm: 150 W | ** 8 Ohm: 150 W | ||
** 4 Ohm: | ** 4 Ohm: | ||
− | * | + | * Total harmonic distortion: 0.5 % |
− | * | + | * Attenuation factor: > 10 (8 Ohm) |
− | * | + | * Frequency response: 20 Hz - 20 KHz |
− | * | + | * Signal-to-noise ratio: |
** Phono: 60 dB | ** Phono: 60 dB | ||
** Tape, AUX: 80 dB | ** Tape, AUX: 80 dB | ||
− | * | + | * Tone control: |
− | ** Bass: ± 12 dB | + | ** Bass: ± 12 dB at 50 Hz |
− | + | Treble: ± 12 dB at 10 kHz | |
− | * Loudness: + 8 dB | + | * Loudness: + 8 dB at 100 Hz, + 4 dB at 10 kHz |
− | * High Filter: | + | * High Filter: yes, - 3 dB at 5 kHz |
− | * Low Filter (Subsonic): 10 Hz, 12 dB / | + | * Low Filter (Subsonic): 10 Hz, 12 dB / octave |
* Mute: | * Mute: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
** MW: 520 - 1605 kHz | ** MW: 520 - 1605 kHz | ||
− | * | + | * Input sensitivities: |
− | ** | + | ** VHF: 2.0 µV |
− | + | MW: 10 µV | |
− | * | + | * Distortion factor: |
− | ** Mono: 0 | + | ** Mono: 0.5 % |
− | + | Stereo: 0.7 | |
− | * | + | * Frequency response: 20 - 15'000 Hz, - 1 dB |
− | * | + | * Signal-to-noise ratio: |
** Mono: 65 dB | ** Mono: 65 dB | ||
** Stereo: 60 dB | ** Stereo: 60 dB | ||
− | * | + | * Channel separation: > 30 dB |
− | * | + | * selectivity: 55 dB |
− | * | + | * Co-wave selection: 2.8 dB |
− | * | + | * Spurious wave selection: 45 dB |
− | * | + | * Image frequency attenuation: 68 dB |
− | * | + | * IF attenuation: 80 dB |
− | * AM | + | * AM suppression: 50 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * VHF muting |
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
* [[Fisher 170]] | * [[Fisher 170]] | ||
* [[Fisher 180]] | * [[Fisher 180]] | ||
Line 97: | Line 96: | ||
− | == | + | == Pictures == |
− | * | + | * Image: Fisher 301 |
− | [[ | + | [[File:Fisher 301-1.jpg]] |
− | + | == Reports == | |
− | |||
− | |||
− | |||
− | == | ||
Line 112: | Line 107: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 03:37, 28 August 2019
Data[edit]
General
- Manufacturer: Fisher
- Model: 301
- Type: Receiver
- Years of manufacture: 1971 - 1973
- Made in: USA
- Color: silver, housing walnut
- Remote control: no
- Power consumption:
- Dimensions: 470 x 140 x 407 mm (WxHxD).
- Weight: 9,2 kg
- Original price approx.: 350 US-$, 1972, 1'860 DM
Connections
- Number of inputs:
- Phono (MM): 2.8 mV / 50 kOhm, 50 mV max.
Aux 1, 2: 200 mV / 100 kOhm, 3.5 V max.
- Tape Play: 300 mV / 100 kOhm
- Tape Play DIN: 300 mV / 100 kOhm
- Number of outputs:
- Tape Rec: 400 mV / 2.2 kOhm
- Tape Rec DIN: 4 mV / 10 kOhm
- Headphones: 5 V, 100 Ohm
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (at distortion)
8 Ohm: 2x 45 W
- 4 Ohm:
- Dynamic power
- 8 Ohm: 150 W
- 4 Ohm:
- Total harmonic distortion: 0.5 %
- Attenuation factor: > 10 (8 Ohm)
- Frequency response: 20 Hz - 20 KHz
- Signal-to-noise ratio:
- Phono: 60 dB
- Tape, AUX: 80 dB
- Tone control:
- Bass: ± 12 dB at 50 Hz
Treble: ± 12 dB at 10 kHz
- Loudness: + 8 dB at 100 Hz, + 4 dB at 10 kHz
- High Filter: yes, - 3 dB at 5 kHz
- Low Filter (Subsonic): 10 Hz, 12 dB / octave
- Mute:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 520 - 1605 kHz
- Input sensitivities:
- VHF: 2.0 µV
MW: 10 µV
- Distortion factor:
- Mono: 0.5 %
Stereo: 0.7
- Frequency response: 20 - 15'000 Hz, - 1 dB
- Signal-to-noise ratio:
- Mono: 65 dB
- Stereo: 60 dB
- Channel separation: > 30 dB
- selectivity: 55 dB
- Co-wave selection: 2.8 dB
- Spurious wave selection: 45 dB
- Image frequency attenuation: 68 dB
- IF attenuation: 80 dB
- AM suppression: 50 dB
Special Features
- VHF muting
Remarks[edit]
- Other models in the same series:
- Fisher 170
- Fisher 180
- Fisher 201
- Fisher 202
- Fisher 203
- Fisher 205
- Fisher 301
- Fisher 401
- Fisher 601
- Fisher 701
- Fisher 801
Pictures[edit]
- Image: Fisher 301