Difference between revisions of "Nordmende RE 1050"
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Nordmende]] |
| − | * | + | * Model: RE-1050 |
| − | + | Type: Receiver | |
| − | * | + | * Years of manufacture: 1978 - 1981 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: Silver, Black |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: 120 W max. |
| − | * | + | * Dimensions (WxHxD): 440 x 140 x 290 mm |
| − | * | + | * Weight: approx. 7 kg |
| − | * | + | * Original price approx.: 598 DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
| − | ** Phono MM: 2 | + | ** Phono MM: 2.5 mV, 50 kOhm |
| − | + | AUX: 150 mV, 50 kOhm | |
** Tape Play: 150 mV, 50 kOhm | ** Tape Play: 150 mV, 50 kOhm | ||
| − | + | FM antenna: 75 Ohm, 300 Ohm | |
| − | ** MW | + | ** MW antenna: 300 Ohm |
| − | * | + | * Number of outputs: |
** Tape Rec: 150 mV | ** Tape Rec: 150 mV | ||
| − | ** | + | ** Headphones (6,3mm jack): |
| − | ** 2 | + | ** 2 pairs of speakers |
| − | ''' | + | '''Technical Data''' |
| − | '' | + | ''Amplifier'' |
| − | * | + | * Continuous power (at distortion). |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: 2x 25 W | ** 4 Ohm: 2x 25 W | ||
| − | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: 2x 35 W | ** 4 Ohm: 2x 35 W | ||
| − | * | + | * Total harmonic distortion: 0.02 % |
| − | * | + | * Attenuation factor: 60 at 8 Ohm |
| − | * | + | * Frequency response: 20 - 20'000 Hz |
| − | * | + | * Signal to noise ratio: |
** Phono MM: 65 dB | ** Phono MM: 65 dB | ||
| − | + | Line: 80 dB | |
| − | * | + | * Tone control: |
| − | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 100 Hz |
| − | + | Treble: ± 10 dB at 10 kHz | |
| − | + | * Loudness: + 10 dB at 100 Hz | |
| − | * Loudness: + 10 dB | + | * High Filter: |
| − | * High Filter: | + | * Low Filter (Subsonic): |
| − | * Low Filter (Subsonic): | + | * Mute: |
| − | * Mute: | ||
''Tuner'' | ''Tuner'' | ||
| − | * | + | * Reception: FM, MW, LW |
| − | * | + | * Frequencies: |
| − | ** | + | ** FM: 87.5 - 108 MHz |
| − | + | MW: 510 - 1650 kHz | |
| − | + | LW: 145 - 345 kHz | |
| − | * | + | * Input sensitivity: |
| − | ** | + | ** VHF: 1.8 µV |
** MW: 20 µV | ** MW: 20 µV | ||
| − | * | + | * Frequency response: 30 - 15'000 Hz |
| − | * | + | * Distortion factor: |
| − | ** Mono: 0 | + | ** Mono: 0.09 % |
| − | ** Stereo: 0 | + | ** Stereo: 0.15 % |
| − | * | + | * Signal-to-noise ratio: |
| − | ** | + | ** FM: |
*** Mono: 74 dB | *** Mono: 74 dB | ||
*** Stereo: 70 dB | *** Stereo: 70 dB | ||
** MW: 50 dB | ** MW: 50 dB | ||
| − | * | + | * Channel separation: 45 dB |
| − | * | + | * selectivity: 55 dB |
| − | * | + | * Co-wave selection: 1.0 dB |
| − | * | + | * Spurious wave selection: 90 dB |
| − | * | + | * IF attenuation: 80 dB |
| − | * | + | * IF attenuation: 90 dB |
| − | * MW | + | * MW suppression: 55 dB |
| − | * | + | * Station memory: |
| − | ''' | + | '''Special Features''' |
| − | * Tape | + | * Tape dubbing |
| − | * | + | * FM muting |
| − | + | * Mono / Stereo switchable | |
| − | * Mono / Stereo | ||
| − | == | + | == Remarks == |
| − | * | + | * Other models of the same series: |
* [[Nordmende RE 1050]] | * [[Nordmende RE 1050]] | ||
* [[Nordmende RE 1100]] | * [[Nordmende RE 1100]] | ||
| Line 97: | Line 95: | ||
| − | == | + | == Pictures == |
| − | * | + | * Image: Nordmende RE 1050 |
| − | [[ | + | [[File:Nordmende RE-1050-1.jpg]] |
| − | == | + | == Reports == |
| Line 108: | Line 106: | ||
| − | [[ | + | [[Category:Receiver]] |
Latest revision as of 00:35, 20 May 2019
Data
General
- Manufacturer: Nordmende
- Model: RE-1050
Type: Receiver
- Years of manufacture: 1978 - 1981
- Made in: Japan
- Color: Silver, Black
- Remote control: no
- Power consumption: 120 W max.
- Dimensions (WxHxD): 440 x 140 x 290 mm
- Weight: approx. 7 kg
- Original price approx.: 598 DM
Connections
- Number of inputs:
- Phono MM: 2.5 mV, 50 kOhm
AUX: 150 mV, 50 kOhm
- Tape Play: 150 mV, 50 kOhm
FM antenna: 75 Ohm, 300 Ohm
- MW antenna: 300 Ohm
- Number of outputs:
- Tape Rec: 150 mV
- Headphones (6,3mm jack):
- 2 pairs of speakers
Technical Data
Amplifier
- Continuous power (at distortion).
- 8 Ohm:
- 4 Ohm: 2x 25 W
- Dynamic power
- 8 Ohm:
- 4 Ohm: 2x 35 W
- Total harmonic distortion: 0.02 %
- Attenuation factor: 60 at 8 Ohm
- Frequency response: 20 - 20'000 Hz
- Signal to noise ratio:
- Phono MM: 65 dB
Line: 80 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: + 10 dB at 100 Hz
- High Filter:
- Low Filter (Subsonic):
- Mute:
Tuner
- Reception: FM, MW, LW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 510 - 1650 kHz LW: 145 - 345 kHz
- Input sensitivity:
- VHF: 1.8 µV
- MW: 20 µV
- Frequency response: 30 - 15'000 Hz
- Distortion factor:
- Mono: 0.09 %
- Stereo: 0.15 %
- Signal-to-noise ratio:
- FM:
- Mono: 74 dB
- Stereo: 70 dB
- MW: 50 dB
- FM:
- Channel separation: 45 dB
- selectivity: 55 dB
- Co-wave selection: 1.0 dB
- Spurious wave selection: 90 dB
- IF attenuation: 80 dB
- IF attenuation: 90 dB
- MW suppression: 55 dB
- Station memory:
Special Features
- Tape dubbing
- FM muting
- Mono / Stereo switchable
Remarks
- Other models of the same series:
- Nordmende RE 1050
- Nordmende RE 1100
- Nordmende RE 1200
- Nordmende RE 1400
Pictures
- Image: Nordmende RE 1050
