Difference between revisions of "Rotel RX-600 A"
| (8 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | __NOTOC__ | |
| − | + | == Data == | |
| − | + | {{navigation}} | |
| − | + | '''General''' | |
| − | + | * Manufacturer: [[Rotel]] | |
| − | + | * Model: RX-600 A | |
| − | + | Type: Receiver | |
| − | + | * Years of manufacture: 1973 - 1976 | |
| − | + | * Made in: Japan | |
| − | + | * Color: Silver, wooden cabinet | |
| − | + | * Remote control: no | |
| − | + | * Power consumption: | |
| − | + | * Dimensions (WxHxD): 457 x 129 x 318 mm. | |
| − | + | * Weight: 8.9 kg | |
| − | + | * Original price approx.: 998 DM | |
| − | + | ||
| − | + | ||
| − | + | '''Connections''' | |
| − | + | * Number of inputs: | |
| − | + | ** Phono MM 1: 2 mV, 50 kOhm | |
| − | + | ** Phono MM 2: 4 mV, 50 kOhm | |
| − | + | ** Aux 1, 2: 150 mV, 50 kOhm, max. 15 V | |
| − | + | ** Tape Play 1, 2: 150 mV, 50 kOhm, max. 15 V | |
| − | + | ** Main In: 1.5 V, 50 kOhm | |
| − | + | ** Antenna FM (75/300 Ohm), MW (300 Ohm). | |
| − | + | * Number of outputs: | |
| − | + | ** Tape Rec 1, 2: 350 mV, 3.3 kOhm | |
| − | + | ** Tape Rec DIN: 120 mV, 90 kOhm | |
| − | + | ** Pre Out: | |
| − | + | ** Headphones: | |
| − | + | ** 2 pairs of speakers | |
| − | + | ||
| − | + | ||
| − | + | '''Technical Specifications''' | |
| − | + | ||
| − | + | ''Amplifier'' | |
| + | * Continuous power (at distortion) | ||
| + | ** 8 Ohm: 2x 30 Watt (20 Hz - 20'000 Hz) | ||
| + | ** 4 Ohm: 2x 40 Watt (1 kHz) | ||
| + | * Dynamic power | ||
| + | ** 8 Ohm: 2x 40 Watt | ||
| + | ** 4 Ohm: 2x 50 Watt | ||
| + | * Frequency response: 9 Hz - 100 kHz, - 3 dB | ||
| + | * Distortion factor: < 0.2 % | ||
| + | * Attenuation factor: 30 at 8 Ohm | ||
| + | * Signal-to-noise ratio: | ||
| + | ** Phono MM: 70 dB | ||
| + | High level: 90 dB | ||
| + | * Tone control | ||
| + | Bass: ± 10 dB at 100 Hz | ||
| + | Treble: ± 10 dB at 10 kHz | ||
| + | * Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz | ||
| + | * High Filter: - 12 dB / octave at 8 kHz | ||
| + | * Low Filter (Subsonic): | ||
| + | * Muting: | ||
| + | |||
| + | |||
| + | ''Tuner'' | ||
| + | * Reception: FM, MW | ||
| + | * Frequencies: | ||
| + | ** FM: 87 - 108 MHz | ||
| + | MW: 525 - 1'605 kHz | ||
| + | * Frequency response: 30 - 15'000 Hz, ± 0,5 dB | ||
| + | * Input sensitivity: 1.8 µV (IHF) | ||
| + | * Distortion factor: 0.4 % (mono), 0.6 % (stereo) | ||
| + | * Signal-to-noise ratio: | ||
| + | ** Mono: 65 dB | ||
| + | Stereo: 60 dB | ||
| + | * Channel separation: 47 dB | ||
| + | * Selectivity: 45 dB | ||
| + | * Co-wave selection: 1.5 dB | ||
| + | * Spurious wave selection: > 90 dB | ||
| + | * Image frequency attenuation: > 100 dB | ||
| + | * IF attenuation: > 100 dB (at 98 MHz) | ||
| + | * AM suppression: 60 dB | ||
| + | |||
| + | |||
| + | '''Special Features''' | ||
| + | * Monitor key | ||
| + | * Lineart key | ||
| + | * High filter button | ||
| + | * Bass and treble separately adjustable for both channels | ||
| + | * Pre- and power amplifier separable | ||
| + | * Matrix circuit for pseudo-quadraphony; | ||
| + | |||
| + | |||
| + | == Remarks == | ||
| + | * Other receivers in the same series: | ||
| + | ** [[Rotel RX-154 A]] | ||
| + | ** [[Rotel RX-400 A]] | ||
| + | ** [[Rotel RX-600 A]] | ||
| + | ** [[Rotel RX-800]] | ||
| + | |||
| + | |||
| + | * Amplifiers of the same series: | ||
| + | ** [[Rotel RA-1210]] | ||
| + | |||
| + | |||
| + | * Tuners of the same series: | ||
| + | ** [[Rotel RT-1220]] | ||
| + | |||
| + | |||
| + | * Headphones of the same series: | ||
| + | ** [[Rotel RH 430]] | ||
| + | ** [[Rotel RH 630]] | ||
| + | ** [[Rotel RH 700]] | ||
| + | |||
| + | |||
| + | == Pictures == | ||
| + | * Extract from brochure: Rotel RX-600 A | ||
| + | [[File:Rotel RX-600 A-Prospekt-1.jpg]] | ||
| + | |||
| + | |||
| + | == Reports == | ||
| + | |||
| + | |||
| + | == Links == | ||
| + | |||
| + | [[Category:Receiver]] | ||
Latest revision as of 00:30, 8 April 2019
Data[edit]
General
- Manufacturer: Rotel
- Model: RX-600 A
Type: Receiver
- Years of manufacture: 1973 - 1976
- Made in: Japan
- Color: Silver, wooden cabinet
- Remote control: no
- Power consumption:
- Dimensions (WxHxD): 457 x 129 x 318 mm.
- Weight: 8.9 kg
- Original price approx.: 998 DM
Connections
- Number of inputs:
- Phono MM 1: 2 mV, 50 kOhm
- Phono MM 2: 4 mV, 50 kOhm
- Aux 1, 2: 150 mV, 50 kOhm, max. 15 V
- Tape Play 1, 2: 150 mV, 50 kOhm, max. 15 V
- Main In: 1.5 V, 50 kOhm
- Antenna FM (75/300 Ohm), MW (300 Ohm).
- Number of outputs:
- Tape Rec 1, 2: 350 mV, 3.3 kOhm
- Tape Rec DIN: 120 mV, 90 kOhm
- Pre Out:
- Headphones:
- 2 pairs of speakers
Technical Specifications
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 30 Watt (20 Hz - 20'000 Hz)
- 4 Ohm: 2x 40 Watt (1 kHz)
- Dynamic power
- 8 Ohm: 2x 40 Watt
- 4 Ohm: 2x 50 Watt
- Frequency response: 9 Hz - 100 kHz, - 3 dB
- Distortion factor: < 0.2 %
- Attenuation factor: 30 at 8 Ohm
- Signal-to-noise ratio:
- Phono MM: 70 dB
High level: 90 dB
- Tone control
Bass: ± 10 dB at 100 Hz Treble: ± 10 dB at 10 kHz
- Loudness: + 10 dB at 100 Hz / + 3 dB at 10 kHz
- High Filter: - 12 dB / octave at 8 kHz
- Low Filter (Subsonic):
- Muting:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87 - 108 MHz
MW: 525 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 0,5 dB
- Input sensitivity: 1.8 µV (IHF)
- Distortion factor: 0.4 % (mono), 0.6 % (stereo)
- Signal-to-noise ratio:
- Mono: 65 dB
Stereo: 60 dB
- Channel separation: 47 dB
- Selectivity: 45 dB
- Co-wave selection: 1.5 dB
- Spurious wave selection: > 90 dB
- Image frequency attenuation: > 100 dB
- IF attenuation: > 100 dB (at 98 MHz)
- AM suppression: 60 dB
Special Features
- Monitor key
- Lineart key
- High filter button
- Bass and treble separately adjustable for both channels
- Pre- and power amplifier separable
- Matrix circuit for pseudo-quadraphony;
Remarks[edit]
- Other receivers in the same series:
- Amplifiers of the same series:
- Tuners of the same series:
- Headphones of the same series:
Pictures[edit]
- Extract from brochure: Rotel RX-600 A
