Difference between revisions of "Hitachi SR-803"
(10 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Hitachi]] |
− | * | + | * Model: SR-803 |
− | * | + | * Type: Receiver |
− | * | + | * Years of manufacture: 1977 - 1978 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Silver, Black |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 370 W |
− | * | + | * Dimensions: 490 x 144 x 400 mm (WxHxD) |
− | * | + | * Weight: 13 kg |
− | * | + | * Original price approx.: 1'098 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono: 2 | + | ** Phono: 2.5 mV / 47 kOhm, 220 mV max. |
** Aux: 150 mV / 50 kOhm | ** Aux: 150 mV / 50 kOhm | ||
** Tape Play 1, 2: 150 mV / 50 kOhm | ** Tape Play 1, 2: 150 mV / 50 kOhm | ||
− | ** Tape Play DIN 1, 2: | + | ** Tape Play DIN 1, 2: 450 mV / 80 kOhm |
− | ** | + | ** Antenna FM / MW: 75 Ohm / 300 Ohm |
− | * | + | * Number of outputs: |
** Tape Rec 1, 2: 150 mV | ** Tape Rec 1, 2: 150 mV | ||
− | ** Tape Rec DIN 1, 2: | + | ** Tape Rec DIN 1, 2: 40 mV |
− | + | Headphones | |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power (DIN) |
− | + | 8 Ohm: 2x 50 W (RMS, 20 - 20'000 Hz) | |
− | + | 4 Ohm: 2x 70 W | |
− | * | + | * Dynamic power |
− | ** 8 Ohm: 2x | + | ** 8 Ohm: 2x 80 W |
− | ** 4 Ohm: | + | ** 4 Ohm: 2x 90 W |
− | * | + | * Total harmonic distortion: 0.1 % (at nominal power) |
− | * | + | * Attenuation factor: 45 |
− | * | + | * Frequency response: 10 - 40'000 Hz, ± 1 dB |
− | * | + | * Signal-to-noise ratio: (extraneous voltage) |
− | ** Phono: | + | ** Phono: 70 dB |
− | ** | + | ** High level: 85 dB |
− | * | + | * Tone control: |
− | ** Bass: ± 10 dB | + | ** Bass: ± 10 dB at 100 Hz |
− | + | Treble: ± 10 dB at 10 kHz | |
− | * Loudness: + 9 dB | + | * Loudness: + 9 dB at 100 Hz, + 4 dB at 10 kHz |
− | * High Filter: - 8 dB | + | * High Filter: - 8 dB at 10 kHz, 12 dB / octave |
− | * Low Filter (Subsonic): - 8 dB | + | * Low Filter (Subsonic): - 8 dB at 50 Hz, 12 dB / Octave |
* Mute: | * Mute: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 88 - 108 MHz |
− | + | MW: 530 - 1'605 kHz | |
− | * | + | * Frequency response: 30 - 15'000 Hz, ± 1 dB |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.5 µV |
** MW: 20 µV | ** MW: 20 µV | ||
− | * | + | * Distortion factor: |
− | ** | + | ** FM: 0.15% (mono), 0.25% (stereo) |
− | + | MW: 0.2% | |
− | + | Signal-to-noise ratio: | |
− | ** | + | ** FM: 74 dB |
− | ** MW: | + | ** MW: 68 dB |
− | * | + | * Channel separation: 45 dB |
− | * | + | * selectivity: |
− | ** | + | ** FM: 80 dB |
** MW: 40 dB | ** MW: 40 dB | ||
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: 1 dB |
− | * | + | * Spurious wave selection: 100 dB |
− | * | + | * Mirror frequency attenuation: |
− | ** | + | ** FM: 85 dB |
− | + | MW: 70 dB | |
− | * | + | * IF attenuation: |
− | ** | + | ** FM: 100 dB |
** MW: 90 dB | ** MW: 90 dB | ||
− | * AM | + | * AM suppression: 55 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * FM muting |
− | |||
− | == | + | == Remarks == |
− | * | + | * Other models in the same series: |
* [[Hitachi SR-503 L]] | * [[Hitachi SR-503 L]] | ||
* [[Hitachi SR-603]] | * [[Hitachi SR-603]] | ||
Line 99: | Line 98: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Hitachi SR-503 L, SR-603, SR-703, SR-803, SR-903 |
− | [[ | + | [[File:Hitachi SR-503 L-603-703-803-903-Prospekt-1.jpg|1600px]] |
− | == | + | == Reports == |
Line 110: | Line 109: | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 09:27, 20 October 2018
Data[edit]
General
- Manufacturer: Hitachi
- Model: SR-803
- Type: Receiver
- Years of manufacture: 1977 - 1978
- Made in: Japan
- Color: Silver, Black
- Remote control: no
- Power consumption: 370 W
- Dimensions: 490 x 144 x 400 mm (WxHxD)
- Weight: 13 kg
- Original price approx.: 1'098 DM
Connections
- Number of inputs:
- Phono: 2.5 mV / 47 kOhm, 220 mV max.
- Aux: 150 mV / 50 kOhm
- Tape Play 1, 2: 150 mV / 50 kOhm
- Tape Play DIN 1, 2: 450 mV / 80 kOhm
- Antenna FM / MW: 75 Ohm / 300 Ohm
- Number of outputs:
- Tape Rec 1, 2: 150 mV
- Tape Rec DIN 1, 2: 40 mV
Headphones
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (DIN)
8 Ohm: 2x 50 W (RMS, 20 - 20'000 Hz) 4 Ohm: 2x 70 W
- Dynamic power
- 8 Ohm: 2x 80 W
- 4 Ohm: 2x 90 W
- Total harmonic distortion: 0.1 % (at nominal power)
- Attenuation factor: 45
- Frequency response: 10 - 40'000 Hz, ± 1 dB
- Signal-to-noise ratio: (extraneous voltage)
- Phono: 70 dB
- High level: 85 dB
- Tone control:
- Bass: ± 10 dB at 100 Hz
Treble: ± 10 dB at 10 kHz
- Loudness: + 9 dB at 100 Hz, + 4 dB at 10 kHz
- High Filter: - 8 dB at 10 kHz, 12 dB / octave
- Low Filter (Subsonic): - 8 dB at 50 Hz, 12 dB / Octave
- Mute:
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 88 - 108 MHz
MW: 530 - 1'605 kHz
- Frequency response: 30 - 15'000 Hz, ± 1 dB
- Input sensitivity:
- FM: 1.5 µV
- MW: 20 µV
- Distortion factor:
- FM: 0.15% (mono), 0.25% (stereo)
MW: 0.2% Signal-to-noise ratio:
- FM: 74 dB
- MW: 68 dB
- Channel separation: 45 dB
- selectivity:
- FM: 80 dB
- MW: 40 dB
- Equal wave selection:
- FM: 1 dB
- Spurious wave selection: 100 dB
- Mirror frequency attenuation:
- FM: 85 dB
MW: 70 dB
- IF attenuation:
- FM: 100 dB
- MW: 90 dB
- AM suppression: 55 dB
Special Features
- FM muting
Remarks[edit]
- Other models in the same series:
- Hitachi SR-503 L
- Hitachi SR-603
- Hitachi SR-703
- Hitachi SR-803
- Hitachi SR-903
Pictures[edit]
- Extract from brochure: Hitachi SR-503 L, SR-603, SR-703, SR-803, SR-903