Difference between revisions of "Sanyo JCX-2400"
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
− | == | + | == Data == |
− | {{ | + | {{navigation}} |
− | ''' | + | '''General''' |
− | * | + | * Manufacturer: [[Sanyo]] |
− | * | + | * Model: JCX-2400 |
− | * | + | * Years of manufacture: 1978 - 1980 |
− | * | + | * Made in: Japan |
− | * | + | * Color: Front silver, housing walnut decor |
− | * | + | * Remote control: no |
− | * | + | * Power consumption: 350 W (max) |
− | * | + | * Dimensions: 440 x 146 x 370 mm (WxHxD) |
− | * | + | * Weight: 14 kg |
− | * | + | * Original price approx.: 1'098 DM |
− | ''' | + | '''Connections''' |
− | * | + | * Number of inputs: |
− | ** Phono MM: 2 | + | ** Phono MM: 2.5 mV / 50 kOhm, max. 150 mV |
− | ** | + | ** Microphone: 2 mV / 10 kOhm |
** AUX: 150 mV / 50 kOhm | ** AUX: 150 mV / 50 kOhm | ||
** Tape Play 1: 150 mV / 50 kOhm | ** Tape Play 1: 150 mV / 50 kOhm | ||
− | + | Tape Play 1 DIN: 150 mV / 50 kOhm | |
− | ** Tape Play 2 DIN: 150 mV / 50 kOhm ( | + | ** Tape Play 2 DIN: 150 mV / 50 kOhm (front input) |
− | ** | + | ** Antenna FM (75/300 Ohm), AM |
− | * | + | * Number of outputs: |
− | ** Tape Rec 1 | + | ** Tape Rec 1: 150 mV |
− | ** Tape Rec 1 DIN: 0 | + | ** Tape Rec 1 DIN: 0.55 mV |
− | ** Tape Rec 2 DIN: 0 | + | ** Tape Rec 2 DIN: 0.55 mV (front input) |
− | ** | + | ** Headphones (6.3 mm jack, front) |
− | ** 2 | + | ** 2 pairs of loudspeakers |
− | ''' | + | '''Technical Data''' |
− | '' | + | ''Amplifier'' |
− | * | + | * Continuous power |
** 8 Ohm: 2x 55 W (20 Hz - 20'000 Hz, 1 %) | ** 8 Ohm: 2x 55 W (20 Hz - 20'000 Hz, 1 %) | ||
− | + | 4 Ohm: 2x 75 W | |
− | * | + | * Dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: 240 W | ** 4 Ohm: 240 W | ||
− | * | + | * Total harmonic distortion: 0.1 % |
− | * | + | * Attenuation factor: > 25 (8 Ohm) |
− | * | + | * Frequency response: |
** Phono RIAA: 20 - 20'000 Hz, ± 0,2 dB | ** Phono RIAA: 20 - 20'000 Hz, ± 0,2 dB | ||
− | + | High Level: 7 - 50'000 Hz, + 0,5 dB, - 3 dB | |
− | * | + | * Signal to noise ratio: |
** Phono MM: 70 dB | ** Phono MM: 70 dB | ||
** AUX, Tape: 90 dB | ** AUX, Tape: 90 dB | ||
− | * | + | * Stereo Channel Separation: |
− | * | + | * Tone control: |
** Bass: ± 10 dB (100 Hz) | ** Bass: ± 10 dB (100 Hz) | ||
− | ** | + | ** Mids: ± 6 dB (1 kHz) |
− | + | Treble: ± 10 dB (10 kHz) | |
− | * Loudness: + 10 dB | + | * Loudness: + 10 dB at 100 Hz, + 4 dB at 10 kHz |
* High Filter: | * High Filter: | ||
* Low Filter (Subsonic): | * Low Filter (Subsonic): | ||
Line 61: | Line 61: | ||
''Tuner'' | ''Tuner'' | ||
− | * | + | * Reception: FM, MW |
− | * | + | * Frequencies: |
− | ** | + | ** FM: 87.5 - 108 MHz |
** MW: 525 - 1605 kHz | ** MW: 525 - 1605 kHz | ||
− | * | + | * Frequency response: 30 - 15,000 Hz, ± 3 dB |
− | * | + | * Input sensitivity: |
− | ** | + | ** FM: 1.6 µV (IHF) |
− | + | MW: 300 µV | |
− | + | Distortion factor: | |
− | ** | + | ** FM: 0.2% (mono), 0.3% (stereo). |
− | + | Signal-to-noise ratio: | |
− | ** | + | ** FM: 70 dB (mono), 65 dB (stereo) |
− | + | MW: 50 dB | |
− | * | + | * Channel separation: |
− | ** | + | ** FM: 40 dB (at 1 kHz). |
− | * | + | * Selectivity: |
− | ** | + | ** FM: 55 dB |
** MW: 33 dB | ** MW: 33 dB | ||
− | * | + | * Equal wave selection: |
− | ** | + | ** FM: 1.3 dB |
− | * | + | * Spurious wave selection: |
− | ** | + | ** FM: 70 dB |
− | * | + | * Image frequency attenuation: |
− | ** | + | ** FM: 50 dB |
** MW: 48 dB | ** MW: 48 dB | ||
− | + | IF attenuation: | |
− | ** | + | ** FM: 100 dB |
** MW: 54 dB | ** MW: 54 dB | ||
− | * AM | + | * AM suppression: 60 dB |
− | ''' | + | '''Special Features''' |
− | * | + | * Microphone Mixer |
− | * | + | * FM muting |
* Tape Dubbing | * Tape Dubbing | ||
− | == | + | == Notes == |
− | * | + | * Other models in the same series: |
** [[Sanyo JCX-2100]] | ** [[Sanyo JCX-2100]] | ||
** [[Sanyo JCX-2200]] | ** [[Sanyo JCX-2200]] | ||
Line 109: | Line 109: | ||
− | == | + | == Pictures == |
− | * | + | * Extract from brochure: Sanyo JCX-2400 with JCX-2300 and JCX-2600 |
[[Datei:Sanyo JCX-2300-2400-2600-Prospekt-2.jpg|1600px]] | [[Datei:Sanyo JCX-2300-2400-2600-Prospekt-2.jpg|1600px]] | ||
− | == | + | == Reviews == |
− | * | + | * Review by "Good Old Hifi": [[http://www.good-old-hifi.de/sanyo_jcx-2400/]] |
== Links == | == Links == | ||
− | [[ | + | [[Category:Receiver]] |
Latest revision as of 04:41, 22 May 2018
Data[edit]
General
- Manufacturer: Sanyo
- Model: JCX-2400
- Years of manufacture: 1978 - 1980
- Made in: Japan
- Color: Front silver, housing walnut decor
- Remote control: no
- Power consumption: 350 W (max)
- Dimensions: 440 x 146 x 370 mm (WxHxD)
- Weight: 14 kg
- Original price approx.: 1'098 DM
Connections
- Number of inputs:
- Phono MM: 2.5 mV / 50 kOhm, max. 150 mV
- Microphone: 2 mV / 10 kOhm
- AUX: 150 mV / 50 kOhm
- Tape Play 1: 150 mV / 50 kOhm
Tape Play 1 DIN: 150 mV / 50 kOhm
- Tape Play 2 DIN: 150 mV / 50 kOhm (front input)
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- Tape Rec 1: 150 mV
- Tape Rec 1 DIN: 0.55 mV
- Tape Rec 2 DIN: 0.55 mV (front input)
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
- 8 Ohm: 2x 55 W (20 Hz - 20'000 Hz, 1 %)
4 Ohm: 2x 75 W
- Dynamic power
- 8 Ohm:
- 4 Ohm: 240 W
- Total harmonic distortion: 0.1 %
- Attenuation factor: > 25 (8 Ohm)
- Frequency response:
- Phono RIAA: 20 - 20'000 Hz, ± 0,2 dB
High Level: 7 - 50'000 Hz, + 0,5 dB, - 3 dB
- Signal to noise ratio:
- Phono MM: 70 dB
- AUX, Tape: 90 dB
- Stereo Channel Separation:
- Tone control:
- Bass: ± 10 dB (100 Hz)
- Mids: ± 6 dB (1 kHz)
Treble: ± 10 dB (10 kHz)
- Loudness: + 10 dB at 100 Hz, + 4 dB at 10 kHz
- High Filter:
- Low Filter (Subsonic):
- Muting: 0 dB, - 20 dB
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 525 - 1605 kHz
- Frequency response: 30 - 15,000 Hz, ± 3 dB
- Input sensitivity:
- FM: 1.6 µV (IHF)
MW: 300 µV Distortion factor:
- FM: 0.2% (mono), 0.3% (stereo).
Signal-to-noise ratio:
- FM: 70 dB (mono), 65 dB (stereo)
MW: 50 dB
- Channel separation:
- FM: 40 dB (at 1 kHz).
- Selectivity:
- FM: 55 dB
- MW: 33 dB
- Equal wave selection:
- FM: 1.3 dB
- Spurious wave selection:
- FM: 70 dB
- Image frequency attenuation:
- FM: 50 dB
- MW: 48 dB
IF attenuation:
- FM: 100 dB
- MW: 54 dB
- AM suppression: 60 dB
Special Features
- Microphone Mixer
- FM muting
- Tape Dubbing
Notes[edit]
- Other models in the same series:
Pictures[edit]
- Extract from brochure: Sanyo JCX-2400 with JCX-2300 and JCX-2600
Reviews[edit]
- Review by "Good Old Hifi": [[1]]