Difference between revisions of "WHD BR 100"
Analoghatwas (talk | contribs) (Schreibfehler korrig.) |
(→Daten) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | * | + | ==Data== |
| + | '''General''' | ||
| + | *Manufacturer: [[WHD]] W.Huber und Söhne D-7212 Deisslingen West Germany. | ||
| + | *Building period: | ||
| + | *Country of manufacture: Germany, West | ||
| + | *Case: High quality chipboard case with decorative foil. | ||
| + | *Dimensions: H 405 mm - W 251 mm - D 200 mm. | ||
| + | *Weight: | ||
| + | *New price (approx.): | ||
| − | * | + | '''Technical Data''' |
| + | *Chassis: 3 way HiFi. | ||
| + | Silky dome tweeter ca 25 mm | ||
| + | Silky midrange dome approx 44 mm | ||
| + | Paper woofer approx 100 mm | ||
| + | Bass reflex tuning, slightly exaggerated bass, cardboard tube | ||
| + | Synthetic fibre dampers to dampen standing waves. Polyster dampers. | ||
| + | *Impedance: 8 Ohm | ||
| + | *transmission range DIN: 35-25000 Hz | ||
| + | *Nominal power: 60 watts | ||
| + | *Music power: 90 watts | ||
| + | *Recommended room size: 30 sqm | ||
| − | * | + | *Crossover: |
| − | ** | + | 3 way crossover with components matched to the speakers. |
| − | ** | + | In the high frequency path there is a high quality air coil and a 3 Ohm resistor. |
| − | ** | + | In the midrange bandpass there are two high quality air core coils, |
| − | + | in the low frequency path a well dimensioned bell ferrite coil has been considered. | |
| − | + | All capacitors are electrolytic capacitors. | |
| + | The crossover is cleanly constructed and well soldered. | ||
| + | The screw on the crossover is a brass material, | ||
| + | which does not affect the woofer coil. | ||
| + | <br /> | ||
| + | |||
| + | == Comments == | ||
| + | *Other models in the same series: | ||
| + | ** [[WHD BR 140|BR 140]] | ||
| + | ** [[WHD BR 150|BR 150]] | ||
| + | ** [[WHD BR 180|BR 180]] | ||
| + | ** [[WHD BR 190|BR 190]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
<br /> | <br /> | ||
| − | [[ | + | [[Category:Loudspeaker]] |
Latest revision as of 16:15, 10 September 2017
Data[edit]
General
- Manufacturer: WHD W.Huber und Söhne D-7212 Deisslingen West Germany.
- Building period:
- Country of manufacture: Germany, West
- Case: High quality chipboard case with decorative foil.
- Dimensions: H 405 mm - W 251 mm - D 200 mm.
- Weight:
- New price (approx.):
Technical Data
- Chassis: 3 way HiFi.
Silky dome tweeter ca 25 mm Silky midrange dome approx 44 mm Paper woofer approx 100 mm Bass reflex tuning, slightly exaggerated bass, cardboard tube Synthetic fibre dampers to dampen standing waves. Polyster dampers.
- Impedance: 8 Ohm
- transmission range DIN: 35-25000 Hz
- Nominal power: 60 watts
- Music power: 90 watts
- Recommended room size: 30 sqm
- Crossover:
3 way crossover with components matched to the speakers.
In the high frequency path there is a high quality air coil and a 3 Ohm resistor.
In the midrange bandpass there are two high quality air core coils,
in the low frequency path a well dimensioned bell ferrite coil has been considered.
All capacitors are electrolytic capacitors.
The crossover is cleanly constructed and well soldered.
The screw on the crossover is a brass material,
which does not affect the woofer coil.
Comments[edit]