| Latest revision |
Your text |
| Line 1: |
Line 1: |
| − | CT 2307 ; UNIVERSUM SENATOR ; Quelle International (Order no. 008.625.6) | + | {{nicht Konform}} |
| | + | CT 2307 ; UNIVERSUM SENATOR ; Quelle International |
| | | | |
| − | The SENATOR class stood at Universum for devices of the upper category.
| + | Die SENATOR-Klasse steht bei Universum für Geräte der gehobenen Kategorie. (Anmerkung des Verfassers: Meiner Kenntnis nach das größte Cassettendeck das Quelle-Universum jemals unter eigenem Markennamen entwickeln hat lassen.) |
| | | | |
| − | Stereo-Logic-Cassette-Tape-Deck 2 Motor - 3 Head - Dual Capstan with High-Com | + | Stereo-Logic-Cassetten-Tape-Deck 2 Motor - 3 Head - Dual Capstan |
| | | | |
| − | Direct Front Loading System, illuminated cassette window, integrated dust cap to be operated manually ; front connection for 2 microphones/Aux (DIN) , 1 stereo headphone (DIN) - volume adjustable. | + | Direct Front Loading System, beleuchtetes Cassettenfenster, integrierte Staubschutzkappe manuell zu bedienen ; Frontanschluß für 2 Mikrofone/Aux (DIN) , 1 Stereo-Kopfhörer (DIN) - Lautstärke regelbar. |
| | | | |
| − | Dual-Capstan Drive (2 tone shafts) ; dual tape tension - tape pressure rollers for advance and tape tension ; logic control and jog key operation (drive functions controlled by solenoid) ; electronically controlled servo motor for running function and additional winding motor (forward/reverse reels). | + | Dual-Capstan Drive (2 Tonwellen); doppelter Bandzug - Bandandruckrollen für Vortrieb und Bandspannung ; Logiksteuerung und Tipptastenbedienung (Laufwerksfunktionen über Hubmagnet gesteuert); elektronisch kontrollierter Servo-Motor für Lauffunktion und zusätzlicher Wickelmotor (Vor-/Zurück-Spulen). |
| | | | |
| − | 1 HARD-permalloy dual-tone head - separate for recording and playback in common housing ; 1 ferrite erase head in compact design. | + | 1 HARD-Permalloy-Doppeltonkopf - getrennt für Aufnahme und Wiedergabe in gemeinsamen Gehäuse ; 1 Ferrit-Löschkopf in Kompakt-Bauweise. |
| | | | |
| − | 4 High-Com Circuit - one circuit each separately for recording and playback as well as right and left channel ; S/N ratio 76 dB. | + | 4 High-Com Circuit - je ein Schaltkreis getrennt für Aufnahme und Wiedergabe sowie rechten und linken Kanal ; Geräuschspannungsabstand 76 dB |
| | | | |
| − | DNR noise reducer (Dynamic Noise Reductor) for playing cassettes recorded with other noise reduction systems. | + | DNR-Störbegrenzer (Dynamic Noise Reductor) zum Abspielen von Cassetten, die mit anderen Rauschunterdrückungssystemen aufgenommen wurden. |
| | | | |
| − | 4 tape types selectable via 2 toggle switches ; Fe²O³ (Ferrro-Oxide) IEC I - CrO² (Chromium Dioxide) IEC II - FeCr (Ferrochrome) IEC III - METAL (Pure Iron) IEC IV. | + | 4 Bandsorten über 2 Kippschalter wählbar ; Fe²O³ (Ferrro-Oxid) IEC I - CrO² (Chromdioxid) IEC II - FeCr (Ferrochrom) IEC III - METAL (Reineisen) IEC IV. |
| | | | |
| | + | [[Bild:Universum_CT2307_Front.jpg]] |
| | + | [[Bild:Universum_CT2307_Schräg.jpg]] |
| | + | [[Bild:Universum_CT2307_Schacht.jpg]] |
| | | | |
| − | | + | [[Kategorie:Kassettendecks]] |
| − | Quelle converted the CT-2307A from dual-capstan to single-capstan because
| |
| − | many devices had problems with tape loops.
| |
| − | | |
| − | | |
| − | For this purpose, the left GA roller was removed by Quelle customer service.
| |
| − | | |
| − | | |
| − | The left rubber pressure roller is no longer present in the CT 2337 model ex works, i.e. the
| |
| − | This means that the change has already been made ex works and not subsequently by Quelle customer service.
| |
| − | | |
| − | | |
| − | The mounting point or the mounting/holding pin of the left GA-pressure lever of the CT-2337 has been changed from a snap ring
| |
| − | to a fastening by nut ex works as well as the belt pressure guide and fork as well as return spring changed !
| |
| − | | |
| − | Also the potentiometer board of the headphone amplifier of the CT2337 was changed.
| |
| − | | |
| − | Often forward and rewind problems are given - The cause is often a defective Idler...
| |
| − | (A prov.Instandsetzung is possible by a hardware store O-ring)
| |
| − | | |
| − | | |
| − | The device was offered for 599/699 DM.
| |
| − | | |
| − | | |
| − | | |
| − | Known problems:
| |
| − | | |
| − | - Fast forward and rewind no longer work due to worn idler.
| |
| − |
| |
| − | Remedy: Remove the top-mounted motor, remove the snap ring of the Idler mechanism (pay attention to the spring!),
| |
| − | remove the first Idler rubber and replace it with a rubber seal of the same size from the sanitary area.
| |
| − | | |
| − | | |
| − | | |
| − | - Synchronization problems with height fluctuations (mostly towards the end of the belt).
| |
| − | | |
| − | Remedy: The cause is the winding mandrels which are broken in all devices and therefore no longer transmit the torque.
| |
| − | Torque no longer transfer - Here help a few drops of power glue between winding mandrel and plate.
| |
| − | | |
| − | | |
| − | The drive is similar to the Telefunken RC-200 deck.
| |
| − | However, the RC-200 is a single capstan drive without rear tape control.
| |
| − | Many parts from this deck are identical in construction and can be cross-changed.
| |
| − | | |
| − | | |
| − | [[Image:Universum_CT2307_Front.jpg]]
| |
| − | [[Image:Universe_CT2307_Slanted.jpg]]
| |
| − | [[Image:Universum_CT2307_Shaft.jpg]]
| |
| − | | |
| − | [[Category:Cassette decks]] | |