Yamaha R-100
Data[edit]
General
- Manufacturer: Yamaha
- Model: R-100
- Type: Receiver
- Years of manufacture: 1983 - 1984
- Made in: Japan
- Color: Silver
- Remote control: Yes
- Power consumption: 410 watts
- Dimensions: 435 x 122 x 386 mm
- Weight: 11 kg
- Original price approx.: 795 US-$ (1984), 2'200 DM
Connections
- Number of inputs:
- Phono MM/MC, MM: 2.5 mV/47 KOhm, MC: 160 µV/100 Ohm.
- Aux, 2x Tape: 120 mV/47 KOhm
- Number of outputs:
- 2x Rec-Out: 120 mV/4,7 KOhm
- Headphones: 0.81 V/270 Ohm
Technical Data
Amplifier
- Continuous power (at distortion)
- 8 Ohm: 2x 100 Watt at 0,015%.
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.008%
- Attenuation factor: 45
- Frequency response: 10 - 30000 Hz
- Signal to noise ratio: 100 dB
- Tone control:
- CCSS system (fixed programmed tone curves, adjustable).
- Loudness: adjustable
- Subsonic: 15 Hz/12 dB, fixed
- Mute: no
- Direct/Line-Straight: no
- Stereo channel separation: 60 dB
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
- MW: 510 - 1620 KHz
- Frequency response:
- Input sensitivity: 1.2µV/28µV (Mono/Stereo DIN).
- Distortion factor: 0.07
Signal to Noise Ratio: 83 dB (Stereo IHF)
- Channel separation: 50 dB
- Selectivity: 85 dB
- Co-wave selection: 1.2 dB
- Spurious wave selection: 95 dB
- Image frequency attenuation: 75 dB
- IF attenuation: 95 dB
- AM suppression: 66 dB
- Output level:
- RDS: no
- Station memory: 10
Special Features
- 2 pairs of speakers connectable
- Spatial Expander
- Auto Phono (switches automatically to the phono input in case of groove contact)
- DNC (noise reduction) switchable
- Mono/Stereo switch
- Bandwidth FM switchable
Remarks[edit]
- Other models in the same series:
- Yamaha R-30
- Yamaha R-50
- Yamaha R-70
- Yamaha R-90
- Yamaha R-100