Technics SE-9200
Data[edit]
General
- Manufacturer: Technics
- Model: SE-9200
- Type: Stereo power amplifier
- Years of manufacture: 1975 - 1976
- Made in: Japan
- Color: Black
- Power consumption: 180 W
- Dimensions: 450 x 173 x 380.5 mm (WxHxD)
- Weight: approx. 15 kg
- Original price approx.: 120'000 Yen (Japan, 1975), 1'800 DM
Connections
- Number of inputs:
- Main In: 1 V / 40 kOhm
- Number of outputs:
- Headphones
- 2 pairs of speakers
Specifications
- Continuous power:
- 8 Ohm: 2x 76 W (RMS, 20-20,000Hz).
4 Ohm: 2x 93 W
- Dynamic power:
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.08%
- Attenuation factor: 100 / 10 / 30 / 1 (referred to 8 Ohm load (loudspeaker), 4-stage switchable)
- Frequency response: 5 - 150,000Hz (+0/-3dB)
- Signal-to-noise ratio: 110 dB (at nominal power)
Special Features
- Attenuation factor switchable in 4 steps!
- Signal input switchable on the front side
- Signal output A + B switchable on the front side
- Channel-separated input level control
- Headphone output
- Analog output power display 3-stage switchable and disengageable
- Color dot warning on heat dissipation blocks of power transistors (color change from yellow to red at >65°C)
- Automatic switch-off at 90°C
- Protection circuits for DC voltage, short circuit, overtemperature
- After power on, time delay of the power output via relay (Anti-Plopp)
- Two mains sockets of American standard with continuous current on the rear of the unit
Remarks[edit]
- Other models of the same series:
Pictures[edit]
- Excerpt from brochure: Technics station wagon SU-9200 / SE-9200
