Technics SA-100L
Data[edit]
General
- Manufacturer: Technics
- Model: SA-100L / SA-100LK
- Years of manufacture: 1978 - 1979
- Made in: Japan
- Color: Silver (SA-100L), Brown (SA-100LK)
- Remote control: no
- Power consumption: 300 W
- Dimensions: 430 x 142 x 300 mm (WxHxD)
- Weight: 7,2 kg
- Original price approx.: 600 DM
Connections
- Number of inputs:
- Phono: 2.5 mV / 47 kOhm, max. 95 mV.
Aux: 150 mV / 33 kOhm
- Tape Play: 150 mV / 33 kOhm
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- Tape Rec: 150 mV
Tape Rec DIN: 30 mV
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power (1 kHz / 20-20,000 Hz)
8 Ohm: 2x 16 W / 2x 15 W 4 Ohm: 2x 18 W / 2x 17 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.3 % (8 Ohm, nominal power, 20-20,000 Hz)
- Attenuation factor:
- Frequency Response:
- Phono: RIAA ± 1 dB
- Aux: 20 - 20,000 Hz ± 0.8 dB)
- Signal-to-noise ratio: (IHF-A)
- Phono: 70 dB
- Aux: 88 dB
- Tone control:
- Bass: 50 Hz, ± 10 dB
Treble: 10 kHz, ± 10 dB
- Loudness: yes
- High Filter: no
- Low Filter (Subsonic): no
- Mute: no
Tuner
- Reception: FM, MW, LW
- Frequencies:
- FM: 88 - 108 MHz
MW: 535 - 1605 kHz LW: 150 - 350 kHz
- Frequency response:
- Input sensitivity:
- FM: 2.5µV
- MW: 20µV
LW: 50µV
- Frequency response: 30 - 15'000 Hz (+ 1 dB, - 2 dB)
- Distortion factor:
- FM: 0.3% (stereo)
- Signal-to-noise ratio:
- FM: 58 dB (stereo), 65 dB (IHF-A).
- Channel separation:
- FM: 45 dB
- Selectivity:
- FM: 60 dB
- MW: 30 dB
- Equal wave selection:
- FM: 1.2 dB
- Spurious wave selection:
- Image frequency attenuation:
- FM: 55 dB
IF attenuation:
- VHF: 80 dB
- AM suppression: 55 dB
Special Features
- Wooden housing
Remarks[edit]
- Other models in the same series:
- Technics SA-100L
- Technics_SA-200
- Technics_SA-300
- Technics_SA-400
- Technics_SA-500
- Technics_SA-600
- Technics_SA-700
- Technics_SA-800
- Technics_SA-1000
Pictures[edit]
- Extract from brochure: Technics Receiver SA-200 L and SA-100 L