Tandberg TR-1010
Data[edit]
General
- Manufacturer: Tandberg
- Model TR-1010
- Type: Receiver
- Year of manufacture: 1972 - 1974
- Manufactured in: Norway
- Color: silver, wooden case rosewood
- Remote control: no
- Power consumption:
- Dimensions: 430 x 120 x 305 mm (WxHxD).
- Weight: 8,8 kg
- Original price approx.: 1'825 DM
Connections
- Number of inputs:
- Phono MM 1: 1.8 - 6 mV adjustable / 50 kOhm.
- Phono MM 2: 5 mV / 50 kOhm
- Tape Play 1, 2,3 : 130 - 400 mV adjustable / 80 kOhm
- Antenna FM (75/300 Ohm), MW (300 Ohm)
- Number of outputs:
- Tape Rec 1, 2: 130 - 400 mV / 100 Ohm
Tape Rec DIN: 130 mV / 80 kOhm
- Headphones: 6,3 mm jack
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
8 Ohm: 2x 40 W 4 Ohm: 2x 50 W
- dynamic power
- 8 Ohm: 2x 60 W
- 4 Ohm: 2x 70 W
- Total harmonic distortion: 0.2 % (at nominal power)
- Attenuation factor: 60 (8 Ohm)
- Frequency response: 12 - 50'000 Hz, + 0 dB, - 1,5 dB
- Signal-to-noise ratio:
- Phono MM: 78 dB
- AUX, Tape: 94 dB
- Stereo channel separation:
- Phono MM: 64 dB
Tape: 80 dB
- Tone control:
- Bass: ± 16 dB at 50 Hz
Treble: ± 14 dB at 10 kHz
- Loudness: + 12 dB at 50 Hz, + 7 dB at 10 kHz
- High Filter:
- Low Filter (Subsonic):
- Mute: yes
Tuner
- Reception: FM, MW
- Frequencies:
- FM: 87.5 - 108 MHz
MW: 518 - 1600 kHz
- Frequency response: 20 - 15'000 Hz, + 0,5 dB / -1,5 dB (FM)
- Input sensitivity:
- FM: 1.5 µV
MW: 15 µV Distortion factor:
- FM: 0.2 % (mono), 0.4 % (stereo).
- Signal-to-noise ratio:
- FM:
- Mono: 64 dB
- FM:
Stereo: 62 dB MW: 45 dB
- Channel separation:
- FM: 40 dB (at 1 kHz)
- Selectivity:
- FM: > 48 dB
- MW: 35 dB
- Equal wave selection:
- FM: 1.8 dB
- Spurious wave selection:
- FM: 100 dB
- Image frequency attenuation:
- FM: 70 dB
- MW: 70 dB
IF attenuation:
- FM: 100 dB
- MW: 70 dB
- AM suppression: 70 dB
Special Features
- Tape 3 input front
- FM muting
- VHF AFC
Comments[edit]
- Other models in the same series:
Pictures[edit]
- Image: Tandberg TR-1010
