Kenwood KR-A 4080
Data[edit]
General
- Manufacturer: Kenwood
- Model: KR-A 4080
- Type: Receiver
- Years of manufacture: 1996 - 1997
- Color: Black
- Power consumption: 190 W
- Dimensions: 440 x 127 x 380 mm (WxHxD)
- Weight : 8,4 kg
- Remote control : Yes, RC-R0401
- Original price approx.: 499 DM
Technical data:
Amplifier:
- Rated power:
- 4 Ohm: 2x 90 Watt (DIN)
8 Ohm: 2x 70 Watt (DIN)
- Total harmonic distortion: 0.03 %
- Frequency response:
- Signal-to-noise ratio:
- Phono MM: 75 dB
Line: 93 dB
- Tone control:
- Bass: ± 8 dB at 150 Hz
Treble: ± 8 dB at 10 KHz
- Loudness: -30 dB, + 6 dB 150 Hz
- Inputs: Phono MM, CD, AUX, Video, Tape 1, Tape 2
FM Tuner:
- FM: 87.5 - 108 MHz
- Distortion factor:
- Mono: 0.6 %
Stereo: 0,7
- Signal-to-noise ratio:
- Mono: 75 dB
Stereo: 68 dB
AM Tuner:
- AM: 530 - 1,610 KHz
- Distortion factor: 0.7
- Signal-to-noise ratio: 48 dB
Remarks[edit]
- Other models in the same series:
- Integrated amplifier:
- Kenwood KA-1080
- Kenwood KA-3080 R
- Kenwood KA-5090 R
- Kenwood KA-7090 R
- Kenwood KAF-1010
- Kenwood KAF-3010 R
- [[Tuner:
- Kenwood KTF-2010
- Kenwood KTF-3010
- A/V Receiver
- Kenwood KR-V 888 D
- Kenwood KR-V 999 D
- Kenwood KR-V 9090
- Kenwood KRF-V 5010
- Kenwood KRF-V 6010
- Kenwood KRF-V 7010
- Kenwood KRF-V 7771 D
- Kenwood KRF-V 8010 D
- CD player
- Kenwood DP-1080
- Kenwood DP-2080
- Kenwood DP-4090
- Kenwood DP-5090
- Kenwood DP-7090
- Kenwood DPF-1010
- Kenwood DPF-2010
- Kenwood DPF-3010
- CD Changer
- Kenwood DP-R 7090
- Kenwood DPF-J 5010
- Kenwood DPF-J 9010
- Kenwood DPF-R 3010
- Kenwood DPF-R 4010
- Kenwood DPF-R 6010
- DVD player:
- Kenwood DVF-5010
- Kenwood DVF-9010
- Tape deck:
- Kenwood KX-3080
- Kenwood KX-5080 S
- Kenwood KX-W 4080
- Kenwood KXF-W 4010
- Kenwood KXF-W 6010
- Subwoofer:
- Kenwood SW-301
- Kenwood SW-501
Pictures[edit]
- Extract from brochure: Kenwood KR-A 4080
Reports[edit]
- Stereo receiver with RDS from 1997 in the new Kenwood design. 90 watts (1 KHz, 1 %) into 4 ohms. No pots, all controls are electronic as is input selection.
- Front is all plastic, speaker connections for 2 pairs are spring terminals only.
- 2 sockets on the back, standby and all off power switch on the front. System remote control with almost all receiver functions.
- A look under the cover fixed with 8 screws after all arouses more enthusiasm :
- The interior is very nice clean and solidly built. The lush power supply is just as convincing as the large massive heat sinks of the discrete power amplifier.
- Two 8 amp DEC relays for the speakers and the standby power supply should also be mentioned.
Buffer capacitors with only 5600 µF.
Links[edit]
- Prospectus in the Kenwood archive: [1]