Kenwood KA-8011
Data[edit]
General
- Manufacturer: Kenwood
- Model: KA-8011
- Type: Stereo integrated amplifier
- Years of manufacture: 1979 - 1981
- Made in: Japan
- Color: Gunmetal, variants Kenwood KA-801 in silver, trio KA-8700 Japan execution
- Power consumption: 710 W at full power
- Dimensions (WxHxD): 440 x 153 x 407 mm
- Weight: 17.5 kg
- Original price approx.: 1'998 DM (but was probably only available in the US Army Shops (PX / AAFEES)
- New price D-80 grips: 200 DM
Connectors
- Number of inputs:
- Input sensitivity:
- Phono 1, 2 MM: 2.5mV, 50 kOhm.
- Tuner: 200mV, 50 kOhm
- AUX: 200mV, 50 kOhm
- Tape Play A, B: 200mV, 50 kOhm
- Tape 2 DIN:
- Number of outputs:
- Outputs:
- Tape Rec: 150mV, 180 Ohm
- Tape 2 DIN: 30mV / 80 Ohm
- Headphones
- 2 pairs of loudspeakers
Technical Data
- Continuous power (at THD)
- 8 Ohm: 2x 110W (RMS, 20 Hz - 20 kHz, 0.01% THD)
- 4 Ohm: 2x 160W (1Khz)
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.015%
- Attenuation factor: 100 (DC - 20Khz, 8 Ohm)
- Frequency response: DC - 400 kHz (+0 / -3dB, DC ON)
- Power bandwidth: 5Hz - 70Khz (0.03% THD)
- Signal to noise ratio:
- Phono 1, 2 MM: 90dB
- Tuner, AUX, Tape, A, B: 105dB
- Tone control
- Bass 100Hz: ± 7,5dB
Treble 10kHz: ± 7,5dB
- Loudness: + 9dB at 100Hz
- Attenuator: 0 dB, - 15 dB, - 30 dB
Special Features
- 2 large VU meters
- Switch Mono, Stereo, Reverse
Remarks[edit]
- Other models in the same series:
- Amplifier:
- Kenwood KA-5011
- Kenwood KA-6011
- Kenwood KA-7011
- Kenwood KA-8011
- Kenwood KA-9077
Pictures[edit]
- Picture: Kenwood KA-8011
Reports[edit]
- Report from "Mackers": [1]
- Report from "Good Old Hifi": [2]