Kenwood KA-2200
Data[edit]
General
- Manufacturer: Kenwood
- Model: KA-2200
- Type: Integrated amplifier
- Years of manufacture: 1982 - 1984
- Made in: Japan
- Color: Silver
- Remote control: no
- Power consumption: max. 900 W
- Dimensions: 440 x 158 x 383 mm (WxHxD)
- Weight: 15 kg
- Original price approx.: 1'600 DM
Connections
- Number of inputs: 7 (6 rear, 1 front)
- Source: 150mV/47kOhm
- Phono 1/2 switchable MM: 2,5 mV / 33,47; 100 kOhm; MC: 0,1 mV / 100 Ohm
Tape 1/2
- Tuner
- AUX / D.A.D. rear and front switchable
- Main-In
- Number of outputs: 2
- Tape 1/2 ( mV/ kOhm)
- Pre-Out
- Headphones
- Speaker A/B (A with Sigma-Drive)
Technical Data
- Continuous power (at distortion factor)
8 Ohm: 2x 150 W at 0.003 4 Ohm: 2x 160 W
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.003% at modulation/8 Ohm
- Attenuation factor: 1.000 at 100 Hz (Sigma Drive B)
- Frequency response: DC - 200 kHz (-3dB)
- Signal-to-noise ratio:
- High level: 110 dB
Phono (MM/MC): 76/92 dB
- Stereo channel separation:
- Tone control: Tone defeat switch
Bass: ± 10 dB Treble: ± 10 dB
- Loudness: 3/6/9 dB at 30/60/90 Hz (separately adjustable)
- High Filter: no
- Low Filter (Subsonic): 6 dB / octave below 18Hz
Mute: Fader button. Press to fade out, press again to fade in.
- Mono switch
- Direct/Line-Straight: no
- Speaker Off / A / B / A+B switchable
Special Features
- Fading button (off and on thread), Front Aux-In.
- Class G Amplifier. Switches between low and high operating voltage depending on output power. Therefore special double transistors: DAT0612N and DAT0612P, as well as DAT1018N and DAT1018P. One per channel, so eight in total.
Remarks[edit]
- Other models in the same series:
- Kenwood KA-990
- Kenwood KA-2200
Pictures[edit]
- Picture: Kenwood KA-2200
- Excerpt from brochure: Kenwood KA-990, KA-2200, KT-1100, KX-880 SR
- Excerpt from Advertisement: Kenwood KA-990, KA-2200, KT-1100, KD-700 D, KX-880 SR.