Kenwood KA-1100 E
Data[edit]
General
- Manufacturer: Kenwood
- Model: KA-1100 D
- Type: Integrated amplifier
- Years of manufacture: 1986 - 1988
- Made in: Japan
- Color: Black
- Remote control: no
- Power consumption: 260 W
- Dimensions: 440 x 170 x 420 mm (WxHxD)
- Weight: 18 kg
- Original price approx.: 1'600 DM
Connections
- Number of inputs:
- Phono 1, 2 MM: 2.5 mV / 47 kOhm.
- Phono MC: 0,1 mV / 100 Ohm
- Tuner: 150 mV / 47 kOhm
- AUX 1, 2 / D.A.D. rear and front switchable: 150 mV / 47 kOhm
- Tape Play 1, 2: 150 mV / 47 kOhm
- Main In:
- Number of Outputs:
- Tape Rec 1, 2:
- Pre-Out:
- Headphones
- 2 pairs of speakers
Technical Data
- Continuous power (at distortion factor)
- 8 Ohm: 2x 150 W at 0,04 %.
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.004 %
- Attenuation factor: 1'000 (50Hz)
- Frequency response: 1 - 150 kHz (-3dB)
- Signal to noise ratio:
- Phono MM: 87 dB
- Phono MC: 76 dB
- High level: 110 dB
- Tone control:
- Bass: ± 10 dB
- Operating frequencies: 200 Hz, 400 Hz
- Bass: ± 10 dB
Treble: ± 10 dB
- Operating frequencies: 3 kHz, 6 kHz
- Loudness: 0 - 8 dB, switchable 30 Hz / 90 Hz
- High Filter: no
- Low Filter (Subsonic): 6 dB / octave below 18Hz
- Mute: yes, - 30 dB
- Line Straight: yes
Special Features
- Tone Linear Switch
- Mono Switch
- Dynamic Linear Drive power amplifier
- Three tape inputs with monitor option
- Additional record selector switch for tape 2/3
- Tape overdubbing capability in both directions
- Two aux inputs
- Front panel connector for Aux-2
- Signal path shortening switch (Digital Direct & Line Straight)
- Two-stage MM/MC phono stage
- Infinitely adjustable loudness
Notes[edit]
- Other models in the same series:
- Kenwood KA-660
- Kenwood KA-880 SD
- Kenwood KA-990 V
- Kenwood KA-1100 D
- Kenwood KA-3300 D
Pictures[edit]
- Extract from brochure: Kenwood KA-1100 D