JVC RX-1050VPTN
Data[edit]
General
- Manufacturer: JVC
- Model: RX-1050 VPTN
- Type: Surround 2 / 4 channel receiver
- Years of manufacture: 1992 - 1995
- Made in: Japan
- Color: Titanium Silver
- Remote control: JVC RM-SR-1050
- Power consumption: 630 W
- Dimensions(WxHxD): 452 x 156 x 393mm
- Weight: 12.5 kg
- Original price approx.: 2'700 DM
Connections:
- Number of inputs:
- Phono MM: 2.5 mV, 47 kOhm
- Phono MC: 0.25 mV, 100 Ohm
- CD, Video: 230 mV, 47 kOhm
- DAT Play: 230 mV, 47 kOhm
- Tape Play 1, 2: 230 mV, 47 kOhm
- VDP Play: 230 mV, 47 kOhm
- VCR Play 1, 2: 230 mV, 47 kOhm
- Digital DAT Play: 0.5 Vp-p at 75 Ohm
- Digital VCR 1, 2 In: 0.5 Vp-p at 75 Ohm
- CD Optical: - 23 to - 14 dBm
- VDP Optical: - 23 to - 14 dBm
- Antenna: 75 Ohm, 300 Ohm
- Number of outputs:
- DAT: 230 mV
- Tape Rec 1, 2: 230 mV
- VCR Rec 1, 2: 230 mV
- Pre-Out: switchable Front / Rear
- Center Out:
- Mono Out:
- Digital DAT Rec: 0,5 Vp-p at 75 Ohm
Digital Monitor Out: 0,5 Vp-p at 75 Ohm
- Digital VDP Out: 0.5 Vp-p at 75 Ohm
- Digital VCR 1, 2 Out: 0.5 Vp-p at 75 Ohm
- Headphones: 8 - 16 Ohm
- 3 speaker pairs (2x front, 1x rear)
- 1 loudspeaker (center
Technical Data
Amplifier
- Continuous power (at distortion)
- 8 Ohm 2-channel: 2x 120 W RMS, 20 - 20,000 Hz, < 0.007%.
- 8 Ohm Surround:
- Front speakers: 2x 120 W RMS
- Center Speakers: 1x 70 W RMS
- Rear speakers: 2x 30 W RMS
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- 2 Ohm: 2x 360 W
- Total harmonic distortion: 0.003% at 120 W
- Attenuation factor: 45 at 8 Ohm
- Frequency response:
- Phono: 20 - 20'000 Hz, ± 0,5 dB
- High Level: 5 - 70,000 Hz, + 0 dB, - 1 dB
- Signal-to-noise ratio:
- Phono: 80 dB
High Level: 100 dB
- Tone control equalizer:
- Equalizer 7 center frequencies: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 16 kHz.
- Control range: ± 10 dB
- Loudness: yes
- High Filter: yes
- Low Filter (Subsonic): yes
- Muting: yes
- Sampling frequencies digital to analog converter: 32 kHz, 44.1 kHz, 48 kHz
Tuner
- Reception: FM/MW
- Frequencies:
- FM: 88 - 108 MHz
- MW: 535 - 1605 KHz
- Input sensitivity:
- FM: 1.8µV
- MW: 30µV
- Frequency response: 30 - 15,000 Hz (+ 0.5 dB, - 3 dB)
Distortion factor: 0.15% (mono), 0.2% (stereo) Signal-to-noise ratio: 81 dB (mono), 73 dB (stereo)
- Channel separation: 40 dB at 1 kHz
- Selectivity: 80 dB at 400 kHz
- Co-wave selection: 1.5 dB
- Spurious wave selection: 65 dB
- Image frequency attenuation: 80 dB
- IF attenuation: 85 dB
- AM suppression: 55 dB
Video
- Format: PAL
- Input sensitivity:
- Video (composite): 1 Vp-p at 75 ohms.
- S-Video Y (luminance): 1 Vp-p at 75 Ohm
- C (chrominance): 0.286 Vp-p at 75 ohms.
- Recording:
- Video (composite): 1 Vp-p at 75 ohms.
- S-Video Y (luminance): 1 Vp-p at 75 Ohm
- C (Chrominance): 0.286 Vp-p at 75 ohms
- Signal-to-noise ratio: 45 dB
- Crosstalk attenuation: 45 dB
- Synchronization: Negative
Special Features
- Digital Acoustic Processor with 6 preset sound fields
- Dolby Pro-Logic Surround
- 3 video inputs with S-Video connections and sound selection
- 40 memory locations for freely selectable settings for FM / MW
Auto memory possible
- 5-digit station name display
- Equalizer with 5 memory locations for freely selectable settings
- Pre-Out Front & Rear
FM Muting Compu-Link connections for AV and TV
- Video inputs SVHS
- Programmable remote control with backlight and touch display
- Snooze circuit
- Dynamic Super-A circuit with GM driver, cf:
Comments[edit]
- Last large receiver from JVC
- Other models in the same series:
- JVC RX-305 L
- JVC RX-505 L
- JVC RX-805 L
- JVC RX-1050VPTN
- Corresponding CD player:
- JVC XL-Z 1050
- Corresponding acoustic processor:
- JVC XP-A 1010 TN
Pictures[edit]
- Extract from brochure: JVC RX-1050 VPTN