Harman/kardon HK 690

Data[edit]

General

  • Manufacturer: Harman/kardon
  • Model: HK 690
  • Type: Integrated amplifier
  • Years of manufacture: 1995 - 2001
  • Color: Black
  • Remote control: Yes
  • Remote control: Yes ( HK 690 )
  • Power consumption: 620 watts
  • Dimensions: 443 x 155 x 405 mm (WxHxD)
  • Weight: 12 kg
  • New price approx.: 1'999 DM


Connections

  • Number of inputs: 7
    • Tuner
    • CD
    • Video-1
    • Video-2
    • Tape-1 as monitor only
    • Tape-2
    • Phono
    • Power Amplifier Input (MAIN IN)
  • Number of outputs: 6
    • 2 pairs of speakers
    • Tape-1-Out
    • Tape-2-Out
    • Headphone jack (6.3mm jack)
    • Pre-amplifier output (PRE OUT)


Technical Data

  • Sine power per channel (FTC), 20 Hz to 20 kHz:
    • 8 ohms: 100 W (at <0.09% THD).
  • both channels driven:
    • 4 ohms: 200 W (at <0.3% THD).
  • sinus power according to DIN, per channel:
    • 4 Ohm: 220 W
  • Impulse power (IHF, 1 kHz, tone impulse):
    • 8 Ohm: 135 W

4 Ohm: 200 W

    • 2 Ohm: 240 W
  • High current reserve (HCC): +/- 75 Amp
  • Screening : 4x 10000 mF
  • 2 rectifiers !!!
  • Inputs are switched by IC
  • Power bandwidth (half nominal power, 8 Ohm): <10 Hz - 100 kHz
  • Frequency response at 1 W (-3dB): 5 Hz - 100 kHz
  • Attenuation factor: 120
  • Signal-to-noise ratio (reference nominal power, A-weighted):
    • Tuner/CD: 95 dB

Phono (MM): 80 dB Phono (MC): 75 dB Input sensitivity/impedance:

    • Tuner/CD: 150 mV/50 kOhm
    • Phono (MM): 2.5 mV/47 kOhm, 125 pF
    • Phono (MC): 250μV/100 Ohm
  • Max. permissible input voltage:
    • Phono (MM): 100 mV
  • Tone control range:
    • Bass (50 Hz): +/- 10 dB

Treble (10 kHz): +/- 10 dB


Special Features

  • toroidal transformer
  • Tape Monitor, recording source selection
  • Source Direct
  • Phono MM / MC switch on rear panel


  • Further data at "Hifi-Engine": [1]


Comments[edit]












Pictures[edit]

  • Extract from brochure: Harman/kardon HK-690

Harman Kardon HK-690-Prospekt-2000.jpg


Reports[edit]

  • Note EU vs. international version:
    • According to the service manual, the German or European version of the HK 690 is set up differently than the International version. The difference is that in the international version a J-FET IC AD746 (U3) is installed and for the German market an IC NE5532, this supplies, after Source Direct (On), directly the output stage, with switch OFF (Source Direct) the IC U3 supplies the tone control. After the tone control "IC U4" (NE5532) an IC U11 (AD 712) is installed (buffer amplifier?), this IC U11 is missing in the SM (international version)!. After IC U11 it goes into the (IC U5) JRC4556 "headphone amplifier" and into the power amplifier. So this HK 690 is not, like the older integrated amplifiers from Harman/Kardon, completely discrete.


  • Report in "Stereoplay" 3 / 1995: top class
  • Report in "Hifi Test" 1996: very good
  • Report in "Audio" 4 / 1999: 3 (of max. 5) ears, "top class


Links[edit]