Difference between revisions of "Technics SH-P1"
| (19 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | __NOTOC__ |
| − | {{ | + | == Data == |
| − | ''' | + | {{navigation}} |
| − | * | + | '''General''' |
| − | * | + | * Manufacturer: [[Technics]] |
| − | * | + | * Model: SH-P 1 |
| − | * | + | * Type: PCM recording processor for PCM recording and playback in combination with a video recorder. |
| − | * | + | * Note: The SH-P 1 was introduced at the Tokyo Audio Fair in 1979 with a retail price. Was only built to order by hand. It is not known if customer units were ever manufactured. |
| − | * | + | * Year of manufacture: 1979 |
| − | * | + | * Manufactured in: Japan |
| − | * | + | * Color: Black |
| − | * | + | * Power consumption: 100 W |
| − | * | + | * Dimensions: 450 x 205 x 480 mm (WxHxD) |
| − | * | + | * Weight: approx. 22 kg |
| + | * New price approx.: 800'000 Yen (Japan, 1979), corresponds to about 12'000 DM | ||
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
| − | ** | + | ** Input sensitivity Line: 142 mV, 50 kOhm. |
| − | * | + | ** Microphone: 66 dB, 600 Ohm |
| − | ** | + | ** Video input: 1 V p-p, 75 Ohm |
| − | + | * Number of outputs: | |
| − | ** 1 | + | ** Line: 250 mV, 560 ohms |
| + | ** Output level: 1 V, 75 Ohm | ||
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Frequency response: 2Hz - 20kHz, +0.5 -1.0dB |
| − | * | + | * Distortion factor: 0.03 |
| − | * | + | * Signal to noise ratio: 85 dB |
| − | |||
| − | ''' | + | '''Special Features''' |
| − | + | * The PCM SH-P1 is a digital audio processor that can convert analog audio signals into digital bit sequences, which can then be recorded onto a standard video cassette using a VCR. | |
| − | + | * Since the sound of non-HIFI recorders was relatively poor compared to other video formats due to the slow tape running speed, completely new sound worlds in digital stereo sound now became possible. | |
| − | + | * Whereas up to now the sound quality could get worse or better depending on the quality of the tape, it remains the same when using the PCM SH-P1. | |
| − | + | * Furthermore, any number of copies of a tape can be made without any loss of sound quality. | |
| − | + | * The PCM SH-P1 has the same design as the Technics pre- and power amplifiers SU-A2 and SE-A1. It is stackable with these components. | |
| − | + | * Any PCM-capable video recorder can be used as a recording device. | |
| + | * Remarkably, the actually poor longitudinal sound of a video cassette is maintained consistently brilliant when using the PCM SH-P1. | ||
| + | * Every video recorder thus becomes a DAT recorder. | ||
| + | * The only disadvantage to contemporary digital audio processors are the missing digital inputs and outputs. | ||
| + | * The resolution of the coding is alternatively with 14 or 16 bit possible. | ||
| + | * The sound is recorded on the video track. Therefore the PCM SH-P1 does not serve as a supplement for the sound, but turns every video recorder into a DAT recorder for high quality audio recordings. | ||
| − | |||
| − | + | == Comments == | |
| − | + | * The Technics SH-P1 was announced as another model in the "Century Series": | |
| − | + | ** Record player: | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | == | ||
| − | * | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | ** | ||
*** [[Technics SL-1000 MK 2|SL-1000 MK 2]] | *** [[Technics SL-1000 MK 2|SL-1000 MK 2]] | ||
| − | ** | + | ** Cartridges: |
*** [[Technics EPC-100 C MK 3|EPC-100 C MK 3]] | *** [[Technics EPC-100 C MK 3|EPC-100 C MK 3]] | ||
| − | ** | + | ** Preamplifier: |
*** [[Technics SU-A 2|SU-A 2]] | *** [[Technics SU-A 2|SU-A 2]] | ||
| − | ** | + | ** Power amplifier: |
*** [[Technics SE-A 1|SE-A 1]] | *** [[Technics SE-A 1|SE-A 1]] | ||
| − | ** | + | ** Cassette Tape Deck: |
*** [[Technics RS-M 95|RS-M 95]] | *** [[Technics RS-M 95|RS-M 95]] | ||
| − | ** | + | ** Tape machine: |
*** [[Technics_RS-1800|RS-1800]] | *** [[Technics_RS-1800|RS-1800]] | ||
| − | ** | + | ** Speakers: |
*** [[Technics_SB-10000|SB-10000]] | *** [[Technics_SB-10000|SB-10000]] | ||
| − | == | + | == Pictures == |
| − | * | + | * Image: Technics SH-P 1 front |
| − | [[ | + | [[File:Technics SH-P1-1.jpg]] |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | * Picture: Technics combination SE-A 1, SU-A2, SH-P1 | |
| + | [[File:Technics SH-P1-4.jpg]] | ||
| − | == | + | == Reports == |
| − | |||
== Links == | == Links == | ||
| − | * | + | * External link on website "Audio Heritage, Japan": [[http://audio-heritage.jp/TECHNICS/etc/sh-p1.html]] |
| − | [[ | + | [[Category:PCM Processors]] |
Latest revision as of 01:42, 9 February 2020
Data[edit]
General
- Manufacturer: Technics
- Model: SH-P 1
- Type: PCM recording processor for PCM recording and playback in combination with a video recorder.
- Note: The SH-P 1 was introduced at the Tokyo Audio Fair in 1979 with a retail price. Was only built to order by hand. It is not known if customer units were ever manufactured.
- Year of manufacture: 1979
- Manufactured in: Japan
- Color: Black
- Power consumption: 100 W
- Dimensions: 450 x 205 x 480 mm (WxHxD)
- Weight: approx. 22 kg
- New price approx.: 800'000 Yen (Japan, 1979), corresponds to about 12'000 DM
Connections
- Number of inputs:
- Input sensitivity Line: 142 mV, 50 kOhm.
- Microphone: 66 dB, 600 Ohm
- Video input: 1 V p-p, 75 Ohm
- Number of outputs:
- Line: 250 mV, 560 ohms
- Output level: 1 V, 75 Ohm
Technical Data
- Frequency response: 2Hz - 20kHz, +0.5 -1.0dB
- Distortion factor: 0.03
- Signal to noise ratio: 85 dB
Special Features
- The PCM SH-P1 is a digital audio processor that can convert analog audio signals into digital bit sequences, which can then be recorded onto a standard video cassette using a VCR.
- Since the sound of non-HIFI recorders was relatively poor compared to other video formats due to the slow tape running speed, completely new sound worlds in digital stereo sound now became possible.
- Whereas up to now the sound quality could get worse or better depending on the quality of the tape, it remains the same when using the PCM SH-P1.
- Furthermore, any number of copies of a tape can be made without any loss of sound quality.
- The PCM SH-P1 has the same design as the Technics pre- and power amplifiers SU-A2 and SE-A1. It is stackable with these components.
- Any PCM-capable video recorder can be used as a recording device.
- Remarkably, the actually poor longitudinal sound of a video cassette is maintained consistently brilliant when using the PCM SH-P1.
- Every video recorder thus becomes a DAT recorder.
- The only disadvantage to contemporary digital audio processors are the missing digital inputs and outputs.
- The resolution of the coding is alternatively with 14 or 16 bit possible.
- The sound is recorded on the video track. Therefore the PCM SH-P1 does not serve as a supplement for the sound, but turns every video recorder into a DAT recorder for high quality audio recordings.
Comments[edit]
- The Technics SH-P1 was announced as another model in the "Century Series":
- Record player:
- Cartridges:
- Preamplifier:
- Power amplifier:
- Cassette Tape Deck:
- Tape machine:
- Speakers:
Pictures[edit]
- Image: Technics SH-P 1 front
- Picture: Technics combination SE-A 1, SU-A2, SH-P1
Reports[edit]
Links[edit]
- External link on website "Audio Heritage, Japan": [[1]]