Difference between revisions of "T+A Pulsar P 1220 R"
| Line 1: | Line 1: | ||
| − | == | + | == Short description == |
| − | + | Space for a few introductory sentences about the device. | |
| − | == | + | == Data == |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[T+A]] |
| − | * | + | * Model: Pulsar P 1220 |
| − | * | + | * Years of manufacture: |
| − | * | + | * Manufactured in: |
| − | * | + | * Color: Black (9005), aluminum silver, chrome. |
| − | * | + | * Dimensions (W/H/D): 7.5 x 44 x 39 cm |
| − | * | + | * Weight: 7 kg |
| − | * | + | * Original price approx: |
| − | ''' | + | '''Connections''' |
| − | * | + | *Inputs: |
| − | **GND | + | **GND The ground cable of the analog turntable is connected here to avoid hum effects. |
| − | + | CD high level input jacks for connecting a CD player. | |
| − | + | TUNER High level input jacks for connection of a tuner | |
| − | **AUX 1 | + | **AUX 1 Universal preamplifier input with an input sensitivity of 250 mV / 20 k |
| − | + | AUX 2 Universal preamplifier input with an input sensitivity of 250 mV / 20k. If an MM or MC phono module is present, AUX 2 is the phono input. | |
| − | **TAPE 1 | + | **TAPE 1 input and output sockets for connecting a device with recording and playback capabilities (recorder) |
| − | **TAPE 2 | + | **TAPE 2 input and output jacks for connecting a second device with recording and playback capabilities (recorder. The input has an input buffer amplifier. It is therefore also suitable for connecting source devices with high output impedance (>1k ). |
| − | **TV | + | **TV High level input jacks for connecting a TV or VCR. This input has an input buffer amplifier. It is therefore suitable for connecting source devices with high output impedance (>1k ). |
| − | * | + | *Outputs: |
| − | **PRE 1 | + | **PRE 1 Variable, unbalanced preamplifier output with RCA jacks. |
| − | **PRE 2 | + | **PRE 2 If XLR module is present Balanced output for connecting active speakers or mono blocks |
| − | ** | + | **Headphones 50 Ohm |
| − | + | 2 x tape 250 mV / 100 Ohm | |
| − | + | PRE out Cinch nominal 1 V rms | |
| − | + | RCA maximum 9.5 V rms | |
| − | + | impedance 22 Ohm | |
| − | + | PRE out XLR nominal 1,45 V rms (special version)maximum 19,6 V rms (special version) | |
| − | + | Impedance 22 ohms (special version) | |
| − | + | Surround interface available | |
| − | ''' | + | '''Technical Data''' |
| − | * | + | *Frequency response + 0 -3 dB 0.5 Hz - 400 KHz |
| − | * | + | *Frequency/noise ratio |
| − | * | + | *High level 7 x 107 / 112 dB |
| − | *Phono MM 83 / 87 dB ( | + | *Phono MM 83 / 87 dB (special version) |
| − | *MC 79 / 82 dB ( | + | *MC 79 / 82 dB (special version) |
| − | *Subsonic Filter | + | *Subsonic Filter fixed (special version) |
| − | + | Distortion < 0,001 % *Intermodulation | |
*Intermodulation < 0,001 % | *Intermodulation < 0,001 % | ||
| − | *Kanaltrennung > 90 dB | + | *Kanaltrennung >90 dB |
| − | * | + | *Input sensitivity nominal |
| − | * | + | *High level 250 mV / 20 kOhm |
| − | *MM 1 | + | *MM 1 - 5 mV |
| − | *16 | + | *16 capacitances (special version) |
| − | *MC 60 | + | *MC 60 - 1000 uV |
| − | *16 | + | *16 impedances (special version) |
| − | * | + | *Mains connection 110 V or 220 / 240 V, 50 Hz |
| − | ''' | + | '''Special equipment''' |
| − | * | + | * here, if available |
| − | == | + | == Remarks == |
| − | + | Other models of the same series: | |
| − | == | + | == Pictures == |
| − | [[ | + | [[Image:T&A_Pulsar_P_1220_R_Front..jpg]] |
| − | [[ | + | [[Image:T&A_Pulsar_P_1220_R_Back.jpg]] |
| − | == | + | == Reviews == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Preamplifier]] |
| − | __NOTOC__ | + | __NOTOC__</0,001> |
Revision as of 08:28, 24 March 2014
Short description
Space for a few introductory sentences about the device.
Data
General
- Manufacturer: T+A
- Model: Pulsar P 1220
- Years of manufacture:
- Manufactured in:
- Color: Black (9005), aluminum silver, chrome.
- Dimensions (W/H/D): 7.5 x 44 x 39 cm
- Weight: 7 kg
- Original price approx:
Connections
- Inputs:
- GND The ground cable of the analog turntable is connected here to avoid hum effects.
CD high level input jacks for connecting a CD player. TUNER High level input jacks for connection of a tuner
- AUX 1 Universal preamplifier input with an input sensitivity of 250 mV / 20 k
AUX 2 Universal preamplifier input with an input sensitivity of 250 mV / 20k. If an MM or MC phono module is present, AUX 2 is the phono input.
- TAPE 1 input and output sockets for connecting a device with recording and playback capabilities (recorder)
- TAPE 2 input and output jacks for connecting a second device with recording and playback capabilities (recorder. The input has an input buffer amplifier. It is therefore also suitable for connecting source devices with high output impedance (>1k ).
- TV High level input jacks for connecting a TV or VCR. This input has an input buffer amplifier. It is therefore suitable for connecting source devices with high output impedance (>1k ).
- Outputs:
- PRE 1 Variable, unbalanced preamplifier output with RCA jacks.
- PRE 2 If XLR module is present Balanced output for connecting active speakers or mono blocks
- Headphones 50 Ohm
2 x tape 250 mV / 100 Ohm PRE out Cinch nominal 1 V rms RCA maximum 9.5 V rms impedance 22 Ohm PRE out XLR nominal 1,45 V rms (special version)maximum 19,6 V rms (special version) Impedance 22 ohms (special version) Surround interface available
Technical Data
- Frequency response + 0 -3 dB 0.5 Hz - 400 KHz
- Frequency/noise ratio
- High level 7 x 107 / 112 dB
- Phono MM 83 / 87 dB (special version)
- MC 79 / 82 dB (special version)
- Subsonic Filter fixed (special version)
Distortion < 0,001 % *Intermodulation
- Intermodulation < 0,001 %
- Kanaltrennung >90 dB
- Input sensitivity nominal
- High level 250 mV / 20 kOhm
- MM 1 - 5 mV
- 16 capacitances (special version)
- MC 60 - 1000 uV
- 16 impedances (special version)
- Mains connection 110 V or 220 / 240 V, 50 Hz
Special equipment
- here, if available
Remarks
Other models of the same series:
Pictures
Reviews
Links
</0,001>