Difference between revisions of "T+A Pulsar PD 1200 R"
(Kategorie) |
|||
| Line 1: | Line 1: | ||
__NOTOC__ | __NOTOC__ | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[T+A]] |
| − | * | + | * Model: Pulsar PD 1200 R |
| − | * | + | * Years of manufacture: |
| − | * | + | * Manufactured in: Herford / FRG |
| − | * | + | * Type: Digital preamplifier |
| − | * | + | * Remote control: Various system remote controls from T+A |
| − | * | + | * Power consumption ( operation / stand-by ): 30 VA / 2.5 VA |
| − | * | + | * Dimensions: 440 x 75 x 360 mm (WxHxD). |
| − | * | + | * Weight: |
| − | * | + | * Color: various |
| − | * | + | * New price approx.: 3.500 € |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
* analog: | * analog: | ||
| − | ** 4 | + | ** 4 high level (1 input of which can be optionally upgraded to MM or MC-PHONO input). |
* digital: | * digital: | ||
| − | ** 4 | + | ** 4 digital inputs |
| − | * | + | * number of outputs: |
| − | ** 1 | + | ** 1 record output (digital) |
| − | ''' | + | '''Technical Data''' |
| − | * Digital | + | * Digital part |
| − | ** | + | ** A/D converter type: Sigma/Delta |
| − | ** | + | ** Resolution: 20 Bit |
| − | ** | + | ** Sampling rate: 44.1 kHz or 48 kHz |
| − | ** | + | ** Frequency response: 2 ... 22,000 Hz |
| − | ** | + | ** Signal-to-noise ratio: > 108 dB |
| − | ** | + | ** Noise-to-noise ratio: > 110 dB |
| − | + | Distortion factor: < 0.002% ** Record output ( analog ) | |
| − | ** | + | ** Record output ( analog ): 1 V / 100 Ohm |
| − | ** | + | ** Record D/A converter: Sigma/Delta, 20 Bit |
| − | * Analog | + | * Analog output module: |
| − | ** | + | ** Digital/Analog converter: 24 Bit / 192 kHz |
| − | ** | + | ** Frequency response: 1 ... 22,000 Hz |
| − | ** | + | ** Signal to noise ratio: 108 / 115 dB |
| − | ** | + | ** Distortion + Intermodulation: 0.0015% |
| − | ** | + | ** Channel separation: 100 dB |
| − | ** | + | ** Tone control ( digital ): +/- 6 dB at 300 / 3000 Hz |
| − | ''' | + | '''Special Features''' |
| − | * | + | * T+A MEP room measurement system to compensate for room influences on the frequency response. |
| − | == | + | == Remarks == |
== Links == | == Links == | ||
| − | * [http://www.taelektroakustik.de/deu/ta2/r_system/pd_1200_r.htm | + | * [http://www.taelektroakustik.de/deu/ta2/r_system/pd_1200_r.htm Direct link to device] |
| − | * [http://www.TAelektroakustik.de Link | + | * [http://www.TAelektroakustik.de Link to manufacturer's site] |
| − | [[ | + | [[Category:Preamplifier]] |
Revision as of 08:29, 24 March 2014
Data
General
- Manufacturer: T+A
- Model: Pulsar PD 1200 R
- Years of manufacture:
- Manufactured in: Herford / FRG
- Type: Digital preamplifier
- Remote control: Various system remote controls from T+A
- Power consumption ( operation / stand-by ): 30 VA / 2.5 VA
- Dimensions: 440 x 75 x 360 mm (WxHxD).
- Weight:
- Color: various
- New price approx.: 3.500 €
Connections
- Number of inputs:
- analog:
- 4 high level (1 input of which can be optionally upgraded to MM or MC-PHONO input).
- digital:
- 4 digital inputs
- number of outputs:
- 1 record output (digital)
Technical Data
- Digital part
- A/D converter type: Sigma/Delta
- Resolution: 20 Bit
- Sampling rate: 44.1 kHz or 48 kHz
- Frequency response: 2 ... 22,000 Hz
- Signal-to-noise ratio: > 108 dB
- Noise-to-noise ratio: > 110 dB
Distortion factor: < 0.002% ** Record output ( analog )
- Record output ( analog ): 1 V / 100 Ohm
- Record D/A converter: Sigma/Delta, 20 Bit
- Analog output module:
- Digital/Analog converter: 24 Bit / 192 kHz
- Frequency response: 1 ... 22,000 Hz
- Signal to noise ratio: 108 / 115 dB
- Distortion + Intermodulation: 0.0015%
- Channel separation: 100 dB
- Tone control ( digital ): +/- 6 dB at 300 / 3000 Hz
Special Features
- T+A MEP room measurement system to compensate for room influences on the frequency response.