Sony TC-WE 725

Data

General

  • Model: TC-WE 725

Specifications

  • 4 tracks, 2 channels (stereo)
  • Power supply: 220 - 230 V alternating voltage, 50/60 Hz
  • Power consumption: 30 W
  • Rewind time:
    • approx. 90 s (with Sony Cassette C-60).
    • with increased speed approx. 45 s (with Sony C-60 cassette)
  • pre-magnetization
  • Signal-to-noise ratio:
    • peak level, weighted, Dolby NR out:
      • Type I cassette (Sony Type I NORMAL): 55 dB.

Type II cassette (Sony Type II HIGH): 57 dB Type IV cassette (Sony Type IV METAL): 58 dB

    • with Dolby B noise reduction:
      • approx. 5 dB at 1 kHz
      • approx. 10 dB at 5 kHz
    • with Dolby C noise reduction:
      • approx. 15 dB at 500 Hz
      • approx. 20 dB at 1 kHz
  • Distortion factor:
    • 0.4 % (with Type I cassette (Sony Type I NORMAL): 160 nWb/m, 315 Hz, 3rd order).

1.8% (with Type IV cassette (Sony Type IV METAL): 250 nWb/m, 315 Hz, 3rd order)

  • Frequency response (Dolby NR ausg.):
    • Type I, Sony Type I (NORMAL):
      • 30 - 16,000 Hz (±3 dB, IEC).
      • 20 - 17,000 Hz (±6 dB)
    • Type II, Sony Type II (HIGH):
      • 30 - 17,000 Hz (±3 dB, IEC).
      • 20 - 18,000 Hz (±6 dB)
    • Type IV, Sony Type IV (METAL):
      • 30 - 19,000 Hz (±3 dB, IEC)
      • 20 - 20,000 Hz (±6 dB)
      • 30 - 13,000 Hz (±3 dB, -4 dB recording).
  • Smooth running fluctuations:
    • ± 0.13 % w. peak (IEC).
    • ± 0.07 % W. RMS (NAB)
    • ± 0.18 % w. peak (DIN)
  • Speed variation range of Pitch Control: approx. -30 to +30 %.
  • Inputs:
    • Line inputs (RCA jacks): sensitivity: 0.16 V
  • Input impedance: 47 kOhm
  • Outputs:
    • Line outputs (Cinch sockets): Nominal output level: 0.5 V at 47 kOhm
  • Load impedance: over 10 kOhm
  • Headphones (stereo phone jack): Output level: 0.25 mW at 32 Ohm
  • Dimensions (W x H x D): 430 x 120 x 290 mm
  • Weight: 4.3 kg

Remarks

Other models of the same series:

Pictures

Sony TC-WE 725.jpg

Reviews

Links