Scan-Dyna 4000

Data

General

  • Manufacturer: Scan-Dyna
  • Model: 4000
  • Type: Receiver
  • Years of manufacture: 1971 - 1974
  • Made in: Denmark
  • Colors: Silver / Black, Wooden Cabinet Walnut, White
  • Dimensions: 548 x 132 x 250 mm (WxHxD)
  • Weight: 10.075 kg
  • Original price approx.: 1'495 DM


Connections:

  • Number of inputs:
    • Phono MM: 2 mV / 47 kOhm

Tape Play 1, 2: 200 mV / 470 kOhm

    • AUX 1, 2: 200 mV / 470 kOhm
  • Number of outputs:
    • Tape Rec 1, 2: 100 mV / 100 kOhm
    • Headphones (6.3 mm jack): 4 Ohm
    • 2 pairs of speakers


Technical data:

Amplifier:

  • Continuous power (at distortion)
    • 8 Ohm: 2x 40 W

4 Ohm: 2x 60 W

  • dynamic power
    • 8 Ohm: 2x 55 W
    • 4 Ohm: 2x 85 W
  • Total harmonic distortion: 1.3
  • Attenuation factor: 20 at 1 kHz
  • Frequency response: 10 - 40'000 Hz (± 1,5 dB)
  • Signal-to-noise ratio:
    • Phono: > 56 dB

High level: > 65 dB

  • Stereo channel separation: 60 dB
  • Tone control:
    • Bass: ± 20 dB at 40 Hz

Treble: ± 20 dB at 12.5 kHz

  • Loudness: + 10 dB 50 Hz, + 7.5 dB at 10 kHz
  • High Filter: - 18 dB / octave at 4 kHz
  • Low Filter (Subsonic): - 12 dB / octave at 40 Hz


Tuner

  • Reception: FM/MW/LW
  • Frequencies:
    • FM: 88 - 108 MHz

MW: 535 - 1605 KHz LW: 145 - 360 KHz

  • Input sensitivity:
    • FM: 1.6µV
    • MW: 18µV
  • Frequency response: 50 - 15'000 Hz, ± 1,5 dB
  • Distortion factor: 0.4 % (mono, stereo)
  • Signal to noise ratio: 60 dB
  • Channel separation: 40 dB at 1 kHz
  • Selectivity: 60 dB at 400 kHz
  • Co-wave selection: 1.5 dB
  • Spurious wave selection: 90 dB
  • Image frequency attenuation: 90 dB
  • IF attenuation: 100 dB
  • AM suppression: 50 dB


Comments





Pictures

  • Picture: Scan-Dyna 4000

Scan-Dyna 4000-1974.jpg


  • Picture: Scan-Dyna 4000

Scan-Dyna 4000-19741.jpg


  • Extract from brochure: Scan-Dyna 4000

Scan-Dyna 4000-Prospekt-1973.jpg


Reports

Links