Difference between revisions of "SAC PA 40 MK2"
(→Bemerkungen) |
(→Daten) |
||
| Line 1: | Line 1: | ||
| − | == | + | == Short description == |
| − | + | Space for a few introductory sentences about the device. | |
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[SAC]] |
| − | * | + | * Model: PA 40 MK2(Igel) |
| − | * | + | * Years of construction: 1993 to 1995 |
| − | * | + | * Made in: Germany |
| − | * | + | * Color: Black |
| − | * | + | * Type: Mono Analog |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: ? |
| − | * | + | * Dimensions: 170 x 82 x 165 (W x H x D) |
| − | * | + | * Weight: 4,5kg |
| − | * | + | * New price approx.: ? (pair) |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: 1 |
| − | + | 1 x Chinch (with sensitivity/impedance) (will be carried after) | |
| − | * | + | * Number of outputs: 1 |
| − | ** | + | ** Loudspeaker terminals |
| − | * | + | * Mains connection (220V): Permanently connected |
| − | ''' | + | '''Technical Data''' |
| − | * | + | * Continuous power (at distortion factor): |
| − | ** 8 Ohm: | + | ** 8 Ohm: ? (manufacturer's specification) |
| − | + | 4 Ohm: 120W (Stereoplay 6/93 ) | |
| − | + | Dynamic power | |
| − | + | 8 Ohm: ? | |
** 4 Ohm: ? | ** 4 Ohm: ? | ||
| − | * | + | * Total harmonic distortion: |
| − | * | + | * Attenuation factor 10kHz: > 400 (Stereoplay 6/93 ) |
| − | * | + | * Frequency response: ? |
| − | * | + | * Signal to noise ratio: ? |
| − | * | + | * Stereo channel separation: ? |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Protection circuits for overtemperature, DC voltage, subsonic frequencies |
| − | == | + | == Remarks == |
| − | * | + | *This is the first evolutionary stage of the Hedgehog . Other models were the [[SAC Hedgehog PA 50]] and [[SAC Hedgehog PA 50 T]] and currently the [[SAC Hedgehog 60]]. |
| − | + | The manufacturer offers an upgrade service ( 280 € ) in which sound-determining components are replaced by new ones (if necessary). In any case, new power supply electrolytic capacitors from Panasonic, lower inductance emitter resistors, fresh end transistors are used. Instead of Sanken 2SC2837 and 2SA1294 the same types from the Chinese-Indian company ISC are used. | |
| − | + | Since mid 2010 a new circuit with a very high quality National Audio IC is used in the input stage. Until now this was an Ic of the type AD 797. The previous hedgehogs can ''not'' be brought to this level by an upgrade! | |
| − | + | To this series also belongs the preamplifier "[[beta]]". | |
| − | == | + | == Pictures == |
| − | == | + | == Reviews == |
== Links == | == Links == | ||
| − | [[ | + | [[Category:Sample Category 1]] |
| − | [[ | + | [[Category:Draft]] |
__NOTOC__ | __NOTOC__ | ||
Latest revision as of 19:25, 20 December 2010
Short description[edit]
Space for a few introductory sentences about the device.
Data[edit]
General
- Manufacturer: SAC
- Model: PA 40 MK2(Igel)
- Years of construction: 1993 to 1995
- Made in: Germany
- Color: Black
- Type: Mono Analog
- Remote control: no
- Power consumption: ?
- Dimensions: 170 x 82 x 165 (W x H x D)
- Weight: 4,5kg
- New price approx.: ? (pair)
Connections
- Number of inputs: 1
1 x Chinch (with sensitivity/impedance) (will be carried after)
- Number of outputs: 1
- Loudspeaker terminals
- Mains connection (220V): Permanently connected
Technical Data
- Continuous power (at distortion factor):
- 8 Ohm: ? (manufacturer's specification)
4 Ohm: 120W (Stereoplay 6/93 ) Dynamic power 8 Ohm: ?
- 4 Ohm: ?
- Total harmonic distortion:
- Attenuation factor 10kHz: > 400 (Stereoplay 6/93 )
- Frequency response: ?
- Signal to noise ratio: ?
- Stereo channel separation: ?
Special Features
- Protection circuits for overtemperature, DC voltage, subsonic frequencies
Remarks[edit]
- This is the first evolutionary stage of the Hedgehog . Other models were the SAC Hedgehog PA 50 and SAC Hedgehog PA 50 T and currently the SAC Hedgehog 60.
The manufacturer offers an upgrade service ( 280 € ) in which sound-determining components are replaced by new ones (if necessary). In any case, new power supply electrolytic capacitors from Panasonic, lower inductance emitter resistors, fresh end transistors are used. Instead of Sanken 2SC2837 and 2SA1294 the same types from the Chinese-Indian company ISC are used. Since mid 2010 a new circuit with a very high quality National Audio IC is used in the input stage. Until now this was an Ic of the type AD 797. The previous hedgehogs can not be brought to this level by an upgrade! To this series also belongs the preamplifier "beta".