Difference between revisions of "Naim NAIT 2"
| (2 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | __NOTOC__ | |
| + | == Data == | ||
| + | {{navigation}} | ||
| + | '''General''' | ||
| + | * Manufacturer: [[Naim]] | ||
| + | * Model: NAIT 2 | ||
| + | * Years of manufacture: 1988 - 1993 | ||
| + | * Manufactured in: Salisbury, England | ||
| + | * Colour: olive/black | ||
| + | * Type: Analogue | ||
| + | * Remote control: no | ||
| + | * Power consumption: | ||
| + | * Dimensions: 76 mm x 205 mm x 276 mm (H x W x D). | ||
| + | * Weight: | ||
| + | * Original price approx: | ||
| + | |||
| + | |||
| + | '''Connections''' | ||
| + | * Number of inputs: | ||
| + | ** 1 Phono MM (2.5 mV, 47 kΩ). | ||
| + | ** 3 line-in (75 mV, 47 kΩ). | ||
| + | * Number of outputs: | ||
| + | ** list the outputs here (with level/impedance). | ||
| + | |||
| + | |||
| + | '''Technical Data''' | ||
| + | * Continuous power (with distortion factor) | ||
| + | ** 8 Ohm: | ||
| + | ** 4 Ohm: | ||
| + | * Dynamic power | ||
| + | ** 8 Ohm: | ||
| + | ** 4 Ohm: | ||
| + | * Total harmonic distortion: | ||
| + | * Attenuation Factor: | ||
| + | * Frequency Response: | ||
| + | * Signal-to-noise ratio: | ||
| + | * Stereo channel separation: | ||
| + | * Tone control: | ||
| + | ** Bass: no | ||
| + | treble: no | ||
| + | * Loudness: no | ||
| + | * High Filter: no | ||
| + | * Low Filter (Subsonic): no | ||
| + | * Mute: yes | ||
| + | * Direct/Line-Straight: no | ||
| + | |||
| + | |||
| + | '''Special Features''' | ||
| + | * here, if available | ||
| + | |||
| + | |||
| + | == Remarks == | ||
| + | Further development of the Nait1 and change to Olive style of cabinet. Was used as an amplifier shocker against the American giants a'la Krell and had the typical Naim sound of the late 80s. | ||
| + | |||
| + | Other models in the same series: | ||
| + | |||
| + | == Pictures == | ||
| + | |||
| + | == Reports == | ||
| + | |||
| + | == Links == | ||
| + | |||
| + | [[Category:Integrated amplifier]] | ||
Latest revision as of 02:39, 6 April 2011
Data[edit]
General
- Manufacturer: Naim
- Model: NAIT 2
- Years of manufacture: 1988 - 1993
- Manufactured in: Salisbury, England
- Colour: olive/black
- Type: Analogue
- Remote control: no
- Power consumption:
- Dimensions: 76 mm x 205 mm x 276 mm (H x W x D).
- Weight:
- Original price approx:
Connections
- Number of inputs:
- 1 Phono MM (2.5 mV, 47 kΩ).
- 3 line-in (75 mV, 47 kΩ).
- Number of outputs:
- list the outputs here (with level/impedance).
Technical Data
- Continuous power (with distortion factor)
- 8 Ohm:
- 4 Ohm:
- Dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion:
- Attenuation Factor:
- Frequency Response:
- Signal-to-noise ratio:
- Stereo channel separation:
- Tone control:
- Bass: no
treble: no
- Loudness: no
- High Filter: no
- Low Filter (Subsonic): no
- Mute: yes
- Direct/Line-Straight: no
Special Features
- here, if available
Remarks[edit]
Further development of the Nait1 and change to Olive style of cabinet. Was used as an amplifier shocker against the American giants a'la Krell and had the typical Naim sound of the late 80s.
Other models in the same series: