Difference between revisions of "Mitsubishi DA-R 440"
(→Bilder) |
(→Daten) |
||
| Line 1: | Line 1: | ||
| − | == | + | == Data == |
| − | {{ | + | {{navigation}} |
| − | ''' | + | '''General''' |
| − | * | + | * Manufacturer: [[Mitsubishi]] |
| − | * | + | * Model: DA-R440 |
| − | * | + | * Year of manufacture: around 1980 - 1981 |
| − | * | + | * Made in: Japan |
| − | * | + | * Color: silver |
| − | * | + | * Remote control: no |
| − | * | + | * Power consumption: 190 W |
| − | * | + | * Dimensions: 424 x 105 x 317 mm (WxHxD) |
| − | * | + | * Weight: 6,3 kg |
| − | * | + | * Original price approx.: 498,-DM |
| − | ''' | + | '''Connections''' |
| − | * | + | * Number of inputs: |
| − | ** Phono: 3 | + | ** Phono: 3.0 mV / 47 kOhm |
| − | + | Aux: 200 mV / 47 kOhm | |
** Tape 1: 200 mV / 47 kOhm | ** Tape 1: 200 mV / 47 kOhm | ||
** Tape 2: 200 mV / 47 kOhm | ** Tape 2: 200 mV / 47 kOhm | ||
| − | ** | + | ** Antenna FM (75/300 Ohm), AM |
| − | * | + | * Number of outputs: |
** Tape 1: 250 mV | ** Tape 1: 250 mV | ||
| − | + | Tape 2: 250 mV | |
| − | ** | + | ** Headphones (6.3 mm jack, front) |
| − | ** 2 | + | ** 2 pairs of loudspeakers |
| − | ''' | + | '''Technical Data''' |
| − | '' | + | ''Amplifier'' |
| − | * | + | * Continuous power |
| − | + | 8 Ohm: 2x 20 W | |
| − | + | 4 Ohm: 2x 33 W | |
| − | * | + | * dynamic power |
** 8 Ohm: | ** 8 Ohm: | ||
** 4 Ohm: | ** 4 Ohm: | ||
| − | * | + | * Total harmonic distortion: 0.05% |
| − | * | + | * Attenuation factor: |
| − | * | + | * Frequency response: |
| − | ** Phono: | + | ** Phono: MM systems only |
** Aux: | ** Aux: | ||
| − | * | + | * Signal-to-noise ratio: |
** Phono: | ** Phono: | ||
** Aux: | ** Aux: | ||
| − | * | + | * Stereo Channel Separation: |
| − | * | + | * Tone control: |
** Bass: 100 Hz, ±10 dB | ** Bass: 100 Hz, ±10 dB | ||
| − | + | Treble: 10 kHz, ±10 dB | |
| − | * Loudness: | + | * Loudness: yes, 100 Hz (plus 7 dB), 10 kHz (plus 5 dB) |
| − | * High Filter: | + | * High Filter: no |
| − | * Low Filter (Subsonic): | + | * Low Filter (Subsonic): no |
* Mute: FM Muting | * Mute: FM Muting | ||
| − | * Direct/Line-Straight: | + | * Direct/Line-Straight: no |
''Tuner'' | ''Tuner'' | ||
| − | * | + | * Reception: FM, MW |
| − | * | + | * Frequencies: |
| − | ** | + | ** FM: |
** MW: | ** MW: | ||
| − | * | + | * Frequency response: |
| − | ** | + | ** FM: |
| − | * | + | * Input sensitivity: |
| − | ** | + | ** VHF: 16 µV (75 Ohm)at stereo |
| − | + | MW: 600 µV | |
| − | + | Distortion factor: | |
| − | ** | + | ** FM: 0.3% (stereo) |
| − | + | Signal-to-noise ratio: | |
| − | ** | + | ** FM: 69 dB (stereo), 75 dB (IHF-A). |
| − | * | + | * Channel separation: |
| − | ** | + | ** FM: 50 dB |
| − | * | + | * Selectivity: |
| − | ** | + | ** FM: 55 dB |
** MW: 30 dB | ** MW: 30 dB | ||
| − | * | + | * Equal wave selection: |
| − | ** | + | ** FM: |
| − | * | + | * Spurious wave selection: |
| − | * | + | * IF attenuation: |
| − | ** | + | ** FM: |
| − | * | + | * IF attenuation: |
| − | ** | + | ** VHF: |
| − | * AM | + | * AM suppression: |
| − | * RDS: | + | * RDS: no |
| − | * | + | * Station memory: yes, 7 mechanical and illuminated buttons |
| − | ''' | + | '''Special Features''' |
| − | * | + | * Signal strength of the station to be tuned in is displayed via the left-hand pointer instrument, input Tape 2 has both cinch sockets and a DIN input (diode socket), two cold appliance sockets. |
| − | == | + | == Pictures == |
| − | [[ | + | [[File:Mitsubishi Receiver DA-R440.jpg|800px]] |
| − | == | + | == Any caption == |
Latest revision as of 15:30, 25 November 2011
Data[edit]
General
- Manufacturer: Mitsubishi
- Model: DA-R440
- Year of manufacture: around 1980 - 1981
- Made in: Japan
- Color: silver
- Remote control: no
- Power consumption: 190 W
- Dimensions: 424 x 105 x 317 mm (WxHxD)
- Weight: 6,3 kg
- Original price approx.: 498,-DM
Connections
- Number of inputs:
- Phono: 3.0 mV / 47 kOhm
Aux: 200 mV / 47 kOhm
- Tape 1: 200 mV / 47 kOhm
- Tape 2: 200 mV / 47 kOhm
- Antenna FM (75/300 Ohm), AM
- Number of outputs:
- Tape 1: 250 mV
Tape 2: 250 mV
- Headphones (6.3 mm jack, front)
- 2 pairs of loudspeakers
Technical Data
Amplifier
- Continuous power
8 Ohm: 2x 20 W 4 Ohm: 2x 33 W
- dynamic power
- 8 Ohm:
- 4 Ohm:
- Total harmonic distortion: 0.05%
- Attenuation factor:
- Frequency response:
- Phono: MM systems only
- Aux:
- Signal-to-noise ratio:
- Phono:
- Aux:
- Stereo Channel Separation:
- Tone control:
- Bass: 100 Hz, ±10 dB
Treble: 10 kHz, ±10 dB
- Loudness: yes, 100 Hz (plus 7 dB), 10 kHz (plus 5 dB)
- High Filter: no
- Low Filter (Subsonic): no
- Mute: FM Muting
- Direct/Line-Straight: no
Tuner
- Reception: FM, MW
- Frequencies:
- FM:
- MW:
- Frequency response:
- FM:
- Input sensitivity:
- VHF: 16 µV (75 Ohm)at stereo
MW: 600 µV Distortion factor:
- FM: 0.3% (stereo)
Signal-to-noise ratio:
- FM: 69 dB (stereo), 75 dB (IHF-A).
- Channel separation:
- FM: 50 dB
- Selectivity:
- FM: 55 dB
- MW: 30 dB
- Equal wave selection:
- FM:
- Spurious wave selection:
- IF attenuation:
- FM:
- IF attenuation:
- VHF:
- AM suppression:
- RDS: no
- Station memory: yes, 7 mechanical and illuminated buttons
Special Features
- Signal strength of the station to be tuned in is displayed via the left-hand pointer instrument, input Tape 2 has both cinch sockets and a DIN input (diode socket), two cold appliance sockets.
Pictures[edit]
