Difference between revisions of "Luxman C-1000f"
Line 9: | Line 9: | ||
* Hergestellt in: Japan | * Hergestellt in: Japan | ||
* Farbe: Front Alu Silber, Gehäuseabdeckung Grau | * Farbe: Front Alu Silber, Gehäuseabdeckung Grau | ||
− | * Leistungsaufnahme: | + | * Fernbedienung: ja, RA-60 |
− | * Abmessungen: | + | * Leistungsaufnahme: 21 W (Normal Operation), 2.3 W (Standby) |
− | * Gewicht: | + | * Abmessungen: 440 x 117 x 407 mm |
+ | * Gewicht: 13 kg | ||
* Neupreis ca.: 32'500 Euro (2012) | * Neupreis ca.: 32'500 Euro (2012) | ||
+ | |||
+ | Total Harmonic | ||
+ | Distortion | ||
+ | Single-ended / 0.009% (20 Hz ~ 20KHz),Balanced / 0.018% (20 Hz ~ | ||
+ | 20KHz) | ||
+ | Frequency Response 20 Hz to 20KHz (+0, - 0.1dB), 5Hz to 116KHz (+0, - 3.0dB) | ||
+ | S / N Ratio Single-ended / 123 dB (A-IHF), Balanced / 120 dB (A-IHF) | ||
+ | Input 5 x RCA Single-ended, 2 x XLR Balanced inputs | ||
+ | Output 2 x RCA Single-ended, 2 x XLR Balanced outputs | ||
+ | Auxiliary Equipment | ||
+ | Front Panel Stand-by / Operate Switch, Input Selector | ||
+ | Volume Control and monitor switch, Output Mode & | ||
+ | Balanced Invert. | ||
+ | Rear Panel Main power switch and signal ground post | ||
+ | |||
+ | AC inlet. | ||
+ | Remote | ||
+ | Control | ||
+ | functions | ||
+ | Stand-by / Operate Switch, Input Selector | ||
+ | Volume up / down, mute, output mode, phase invert, | ||
+ | balance, Display Dimmer, preset controls, | ||
+ | tone controls, REC output | ||
+ | |||
+ | Single-ended / rated 1 V/564 Ω maximum 5.8 V, | ||
+ | Balanced / rated 1 V/600 Ω maximum 6.2 V | ||
'''Anschlüsse''' | '''Anschlüsse''' | ||
* Anzahl der Eingänge: | * Anzahl der Eingänge: | ||
* Unbalanced: | * Unbalanced: | ||
− | + | ** Line 1 - 3: 250mV / 47kOhm | |
− | |||
− | ** Line 1 - 3: 250mV / | ||
* Balanced: | * Balanced: | ||
− | ** XLR- | + | ** XLR 1 - 3: 250mV / 67kOhm |
* Anzahl der Ausgänge: | * Anzahl der Ausgänge: | ||
* Unbalanced: | * Unbalanced: | ||
Line 30: | Line 55: | ||
* Balanced: | * Balanced: | ||
** Output 1, 2: 1V / 600 Ohm, max. 7,5V | ** Output 1, 2: 1V / 600 Ohm, max. 7,5V | ||
− | * Remote 1, 2: | + | * Remote 1, 2: 2x RJ-11 |
Revision as of 05:04, 7 May 2018
Daten
Allgemein
- Hersteller: Luxman
- Modell: C-1000f
- Typ: Stereo Vorverstärker
- Baujahre: 2005 - 2012
- Hergestellt in: Japan
- Farbe: Front Alu Silber, Gehäuseabdeckung Grau
- Fernbedienung: ja, RA-60
- Leistungsaufnahme: 21 W (Normal Operation), 2.3 W (Standby)
- Abmessungen: 440 x 117 x 407 mm
- Gewicht: 13 kg
- Neupreis ca.: 32'500 Euro (2012)
Total Harmonic Distortion Single-ended / 0.009% (20 Hz ~ 20KHz),Balanced / 0.018% (20 Hz ~ 20KHz) Frequency Response 20 Hz to 20KHz (+0, - 0.1dB), 5Hz to 116KHz (+0, - 3.0dB) S / N Ratio Single-ended / 123 dB (A-IHF), Balanced / 120 dB (A-IHF) Input 5 x RCA Single-ended, 2 x XLR Balanced inputs Output 2 x RCA Single-ended, 2 x XLR Balanced outputs Auxiliary Equipment Front Panel Stand-by / Operate Switch, Input Selector Volume Control and monitor switch, Output Mode & Balanced Invert. Rear Panel Main power switch and signal ground post
AC inlet. Remote Control functions Stand-by / Operate Switch, Input Selector Volume up / down, mute, output mode, phase invert, balance, Display Dimmer, preset controls, tone controls, REC output
Single-ended / rated 1 V/564 Ω maximum 5.8 V, Balanced / rated 1 V/600 Ω maximum 6.2 V Anschlüsse
- Anzahl der Eingänge:
- Unbalanced:
- Line 1 - 3: 250mV / 47kOhm
- Balanced:
- XLR 1 - 3: 250mV / 67kOhm
- Anzahl der Ausgänge:
- Unbalanced:
- Tape Rec 1, 2: 1V / 300 Ohm, max. 7,5V
- Monitor 1, 2: 1V / 300 Ohm, max. 7,5V
- Output 1, 2: 1V / 300 Ohm, max. 7,5V
- Balanced:
- Output 1, 2: 1V / 600 Ohm, max. 7,5V
- Remote 1, 2: 2x RJ-11
Technische Daten
- Frequenzgang:
- 20 Hz - 20'000 Hz, + 0 dB, - 0,1 dB
- 10 Hz - 100'000 Hz, + 0 dB, - 2,2 dB
- Klirrfaktor: < 0.005 % bei 1 kHz
- Signalrauschabstand: 119 dB
- Klangregelung:
- Bass: ± 10 dB
- Höhen: ± 10 dB
- Line Straight: ja
Besondere Ausstattungen
- Flip Down Frontklappe für wenig gebrauchte Bedienelemente
- Ausgang schaltbar: Off, Unbalanced, Balanced, Beide
- Monitor schaltbar: Off, 1 oder 2
- Dubbing
- Invertierte Phase
- Mono / Stereo Umschalter
- Anschlussbuchsen 1, 2 für Ferneinschaltung, Netzschalter schaltet Endstufen mit ein
- Bi-Amping möglich
- Line Phase Sensor
Bemerkungen
- Vorverstärker der gleichen Serie:
- Endverstärker der gleichen Serie:
- CD-Player der gleichen Serie:
- Phono Vorverstärker der gleichen Serie:
Bilder
- Auszug aus Prospekt: Luxman C-1000f
- Auszug aus Prospekt: Luxman C-1000f Rückseite