Difference between revisions of "Infinity Hybrid Class A"
 
Line 1: Line 1:
−
'''Infinity Hybrid Klasse A Verstärker'''
+
'''Infinity Hybrid Class A Amplifier''''
  
−
Der Infinity "HybridClass A" Verstärker wurde von Infinity gebaut um die besten Boxen der IRS Serie damit zu betreiben. Die Eingangsseite des Boliden wird von ausgewähltem und rauscharmen HI-GRADE-Röhren des Herstellers AMPEREX und RCA, betrieben.  
+
The Infinity "HybridClass A" amplifier was built by Infinity to drive the best speakers of the IRS series with it. This HCA was only built in very strictly limited quantities (100 units). The input side of this beast is driven by selected and low noise HI-GRADE tubes from the manufacturer AMPEREX and RCA.  
  
−
1978 übertrug Infinity Systems die Aufgabe, einen Infinity Hybrid Klasse A Leistungsverstärker zu entwickeln an den Audio Entwickler und Ingenieur Bascom H. King.  
+
In 1978 Infinity Systems assigned the task of developing an Infinity Hybrid Class A power amplifier to audio developer and engineer Bascom H. King.  
  
−
Der Hybrid A Verstärker wurde gebaut, um die Vorteile beider Technologien voll auszunutzen: Röhren für den Eingangs- und Spannungsverstärker, und Transistoren für den Ausgangs- und Stromverstärker.  
+
The Hybrid A amplifier was built to take full advantage of both technologies: Tubes for the input and voltage amplifier, and transistors for the output and current amplifier.  
  
−
Nach einem Jahr harter Arbeit, die Hilfe von Ingenieur Bob Day eingeschlossen, der die physische Verpackung und den Front-Panel entwarf, war der hybride Klasse A Verstärker endlich fertig.
+
After a year of hard work, including the help of engineer Bob Day who designed the physical packaging and front panel, the hybrid class A amplifier was finally ready.
  
−
'''Einige technische Daten:'''  
+
'''Some technical data:'''  
 
* Introduced: 1978
 
* Introduced: 1978
−
* Stromaufnahme: 1500W
+
* Power consumption: 1500W
−
* Ausgangsleistung: 2 x 150 W / 8 Ohm, 2 x 280 W / 4 Ohm, 2 x 400 W / 2 Ohm, max. 2 x 700W
+
* Output power: 2 x 150W / 8 ohms, 2 x 280W / 4 ohms, 2 x 400W / 2 ohms, max 2 x 700W.
−
* Abmessungen: BxHxT 483 X 508 X 228 mm
+
* Dimensions: WxHxD 483 X 508 X 228 mm.
−
* Gewicht: ca. 43kg mit Verpackung
+
* Weight: approx. 43kg with packaging
  
−
Informationen stammen von www.infinity-classics.de und die Freigabe der Daten ist genehmigt.  
+
Information comes from www.infinity-classics.de and the release of the data is approved.  
  
−
[[Kategorie:Endstufen]]
+
[[Category:Power Amplifiers]]

Latest revision as of 03:29, 22 July 2011

Infinity Hybrid Class A Amplifier'

The Infinity "HybridClass A" amplifier was built by Infinity to drive the best speakers of the IRS series with it. This HCA was only built in very strictly limited quantities (100 units). The input side of this beast is driven by selected and low noise HI-GRADE tubes from the manufacturer AMPEREX and RCA.

In 1978 Infinity Systems assigned the task of developing an Infinity Hybrid Class A power amplifier to audio developer and engineer Bascom H. King.

The Hybrid A amplifier was built to take full advantage of both technologies: Tubes for the input and voltage amplifier, and transistors for the output and current amplifier.

After a year of hard work, including the help of engineer Bob Day who designed the physical packaging and front panel, the hybrid class A amplifier was finally ready.

Some technical data:

  • Introduced: 1978
  • Power consumption: 1500W
  • Output power: 2 x 150W / 8 ohms, 2 x 280W / 4 ohms, 2 x 400W / 2 ohms, max 2 x 700W.
  • Dimensions: WxHxD 483 X 508 X 228 mm.
  • Weight: approx. 43kg with packaging

Information comes from www.infinity-classics.de and the release of the data is approved.

Retrieved from "https://hifi-wiki.com/index.php?title=Infinity_Hybrid_Class_A&oldid=65841"