Difference between revisions of "Infinity F.E.T. Preamplifier"

m
m
 
Line 1: Line 1:
Dieser Vorverstärker wurde ca. mitte / ende der 70er bis Anfang der 80er Jahre gebaut. Er ist der einzige Vorverstärker, den Infinity je gebaut hat. Von dieser Vorstufe wurde nur 200 Stück gebaut!
+
This preamp was built around the mid / end of the 70's to the beginning of the 80's. It is the only preamplifier Infinity ever built. Only 200 of this preamp were built! The F.E.T. Preamp was not produced for the European market and therefore it should not be available in Europe, especially since this device was built exclusively for 117 V/AC (not switchable to other values). However, exceptions prove the rule, because 1 copy does exist in Europe.
  
Der F.E.T. Preamp ist eine Vorstufe passend zur Swamp-Endstufe. Der F.E.T. Preamp wurde etwa zeitgleich und im gleichen Design wie der Swamp gebaut. Diese beiden Geräte haben sich gegenseitig ergänzt.
+
The F.E.T. Preamp is a preamp suitable for the Swamp power amp. The F.E.T. Preamp was built at about the same time and in the same design as the Swamp. These two devices complemented each other.
  
'''Technische Daten:'''
+
'''Technical Data:'''
  
* Frequenzbereich: Line 20 Hz - 100kHz +/- 1dB und 1 Hz - 230 kHz -3 dB, Phono 3 Hz - 50 kHz -3 dB (MC)  
+
* Frequency range: line 20 Hz - 100kHz +/- 1dB and 1 Hz - 230 kHz -3 dB, phono 3 Hz - 50 kHz -3 dB (MC).
* Intermodulationsverzerrungen bei 2 V Ausgangsspannung: Phono MM 0,05 %, Phono MC 0,07 %, Line 0,05 %  
+
* Intermodulation distortion at 2 V output voltage: Phono MM 0.05 %, Phono MC 0.07 %, Line 0.05 %  
* Harmonische Verzerrungen bei 2 V Ausgangsspannung: Phono MM 0,05 %, Phono MC 0,07 %, Line 0,05 %  
+
* Harmonic distortion at 2 V output voltage: Phono MM 0.05 %, Phono MC 0.07 %, Line 0.05 %  
* Signal-Rauschabstand: Phono MM -82 dB, Phono MC -70 dB, Line -90 dB  
+
Signal-to-noise ratio: Phono MM -82 dB, Phono MC -70 dB, Line -90 dB  
* Eingangsimpedanz: Phono MM 47 kOhm, Line 50 kOhm  
+
* Input impedance: Phono MM 47 kOhm, Line 50 kOhm  
* Stromverbrauch: 30 Watt
+
* Power consumption: 30 watts
* Gewicht: 11,8 kg  
+
* Weight: 11,8 kg  
* Abmessungen BxHxT: 469x114x381 mm
+
* Dimensions WxHxD: 469x114x381 mm
[[Kategorie:Vorverstärker]]
+
[[Category:Preamplifier]]
  
Informationen stammen von www.infinity-classics.de und die Freigabe der Daten ist genehmigt.
+
Information is from www.infinity-classics.de and release of data is approved.

Latest revision as of 12:23, 3 January 2012

This preamp was built around the mid / end of the 70's to the beginning of the 80's. It is the only preamplifier Infinity ever built. Only 200 of this preamp were built! The F.E.T. Preamp was not produced for the European market and therefore it should not be available in Europe, especially since this device was built exclusively for 117 V/AC (not switchable to other values). However, exceptions prove the rule, because 1 copy does exist in Europe.

The F.E.T. Preamp is a preamp suitable for the Swamp power amp. The F.E.T. Preamp was built at about the same time and in the same design as the Swamp. These two devices complemented each other.

Technical Data:

  • Frequency range: line 20 Hz - 100kHz +/- 1dB and 1 Hz - 230 kHz -3 dB, phono 3 Hz - 50 kHz -3 dB (MC).
  • Intermodulation distortion at 2 V output voltage: Phono MM 0.05 %, Phono MC 0.07 %, Line 0.05 %
  • Harmonic distortion at 2 V output voltage: Phono MM 0.05 %, Phono MC 0.07 %, Line 0.05 %

Signal-to-noise ratio: Phono MM -82 dB, Phono MC -70 dB, Line -90 dB

  • Input impedance: Phono MM 47 kOhm, Line 50 kOhm
  • Power consumption: 30 watts
  • Weight: 11,8 kg
  • Dimensions WxHxD: 469x114x381 mm

Information is from www.infinity-classics.de and release of data is approved.